2008 Acura Mdx Awd, 7 Passengers on 2040-cars

Auto blog

Acura NSX prototype gets back on track

Developing a new vehicle is not without its complications, we're sure, but usually things follow a fairly predictable progression: you develop a prototype, you test it, test it and test it again, then you put it into production. What you don't expect is that your prototype will burn to the ground, but that's what famously happened to the NSX which Honda engineers were testing a few months ago.
Fortunately, the Acura NSX prototype is back on track, both literally and figuratively, as you can see from this latest batch of spy shots snapped at the Nürburgring. This camouflaged prototype looks pretty much the same as the last one, only, you know... less crispy. Which is to say, it looks pretty much ready to hit showrooms.
The naysayers may point out that Honda chose colder and damper weather to put the NSX back into testing - thereby mitigating the risk of another fire - but we're sure the Japanese automaker has been working hard to fix the flammability issues, whatever may have caused them, over the past few months. At least, we hope they have.

Acura NSX bodywork to be sheathed in zirconium e-coat, fewer paint layers

Automakers make halo cars to drum up excitement and show off what they can do, but there's more to it than that. Advanced platforms allow a company's engineers to experiment with all sorts of technologies. And in the case of the upcoming new Acura NSX, that includes new paint processes.
Speaking with Autoline in this video interview, Honda's North American Senior VP Jon Minto talked about an innovative zirconium e-coat which it's applying to the new NSX. Unlike some experimental paints developed for Formula One, however, this coating is not designed to minimize drag or enhance cooling: it's designed to be more environmentally friendly.
It's one of a few measures which Honda is implementing on the NSX before expanding it to more accessible models, along with another process that uses fewer coats to reduce energy consumption by 40 percent. Watch the interview with Autoline host John McElroy right here.

Hurricane Sandy cost automakers 15,000 vehicles, may have ruined up to 200k

Hurricane Sandy was the largest Atlantic storm in US history, and its total economic impact is just now coming into view. According to Automotive News, Toyota, Chrysler, Nissan and Honda are set to scrap around 15,000 new vehicles ruined by the storm. Nissan alone accounts for about 40 percent of those, with 6,000 Nissan and Infiniti models deeded "un-saleable" due to damage. The company saw 56 dealerships shuttered due to the storm, but 51 of those have since reopened.
Toyota, meanwhile, had some 4,000 vehicles at its Newark port facility, and of those, 3,000 may be scrapped. An additional 825 were dealer inventory when they were ruined. Honda and Acura dealers are reportedly sending 3,440 vehicles to the salvage yard. By comparison, Chrysler weathered the storm fairly well with 825 units destroyed, while Hyundai suffered only 400 lost units and Kia scrapped around 200.
As you may recall, Fisker also suffered some losses, and Automotive News reports the manufacturer saw 320 Karma models damaged beyond repair. Ford and General Motors have yet to come up with estimates, and no automaker has commented on the full cost of replacing the vehicles.