2005 Audi A6 3.2 Quattro Navigation Sport Loaded Extra Clean on 2040-cars

Auto blog

ABT Sportsline coming to US, premiering AS6 at SEMA

ABT Sportsline, known as ABT Tuning from its founding in 1967 until 1991, is a German aftermarket parts and tuning company that has focused on enhancing Volkswagens and Audis since the VW GTI bowed in 1978 (in Europe, at least) and races competitively in DTM (Germany's touring car racing series). The company has kept its roots in Europe for all of these years, but will debut the AS6, based on the Audi A6, at the Specialty Equipment Market Association (SEMA) in a couple weeks before opening up shop in Los Angeles in early 2014.
ABT focused on making the AS6 a balanced package by increasing engine output, tuning the suspension, giving it understated style and improving the brakes. Details are light, but the AS6's 3.0-liter diesel V6 makes 286 horsepower, a 41-hp increase over stock. Not paying attention yet? Torque jumps from 369 pound-feet to 500 lb-ft, endowing the Audi with a lot of much-appreciated low-rpm grunt. The springs are swapped out for a set of ABT units, and the body kit adds front and rear spoilers, side and rear skirts and carbon-fiber mirror covers. ABT's ER-C 20-inch wheels fit over new brakes.
We'll have more details on the car at SEMA, so stay tuned. But in the meantime, head on below to read the press release.

Don't hold your breath for an Audi RS8

There was a time not so long ago when Quattro GmbH produced essentially one model at a time. But that time is behind us. These days it's expanding into a full-fledged performance division to rival Mercedes-AMG and BMW's M department. Quattro GmbH is currently building the Audi RS4 Avant, RS5 coupe and cabrio, RS6 Avant, RS7, RS Q3 and the TT RS coupe and roadster - not to mention the R8. And while it's showing no signs of slowing down, but the latest intel from across the pond suggests we shouldn't count on an RS version of Audi's flagship sedan.
This according to Car and Driver, which spoke to Stephan Reil, the chief engineer at Quattro GmbH. Reil says Audi works on a teutonically rigid performance formula: an RS model has to have 20 to 25 percent more power than the existing S version. Considering that the existing S8 makes 512 horsepower and the RS7 a solid 553, we're not sure Audi really needs anything more powerful. But by Reil's calculations, the RS8 would need to pack between 630 and 655 hp, which would put it well ahead of rivals like the 550-hp Jaguar XJR, the 540-hp BMW Alpina B7, the 523-hp Maserati Quattroporte and even the new 577-hp Mercedes-Benz S63 AMG - and in league only with the even more powerful S65 AMG, which in its outgoing form produced 630 hp.
The question then comes down to whether there are enough customers lining up for the S65 that Audi would want to poach away from Mercedes. Or perhaps more pertinently, whether it might end up just taking customers from the new Bentley Flying Spur, which is already offering 616 horsepower in an even more prestigious, if less performance-focused package. Either way you look at it, Audi is apparently steering clear.

Audi's latest design is a table clock

Audi and Porsche have more things in common than we can count. They're both German, of course, and have both enjoyed considerable winning streaks at Le Mans. Both have a tendency to put their (often turbocharged) engines at one extreme of the car or another, driving either the closest wheels or all four. Both tend to follow a brand-wide evolutionary design approach, focusing their energies instead on the engineering that goes under the bodywork. Both now find themselves under the same corporate umbrella, and now that they are, Audi has followed Porsche's lead in setting up its own design consultancy.
Like Porsche Design, Audi Design is now taking on projects for all manner of clients, from pianos to foosball tables. In this latest collaboration, Audi has designed a table clock for Munich-based watchmaker Erwin Sattler. The table-top clock houses a high-frequency mechanical movement in a foot-tall glass case that lets you see the intricate clockwork, held in place by two ruthenium clasps.
Unveiled in Switzerland at the Baselworld watch and jewelry show, the clock is now available to order. But while prices haven't been announced, don't expect it to come cheap: other Erwin Sattler table clocks typically sell for upwards of $10,000, and we wouldn't expect the new design to come at a discount. Scroll down below for the official press release.