2012 Audi Tts 2dr Cpe S Qtr 2 on 2040-cars

Auto blog

Bentley testing new SUV in Audi Q7's clothes

Sure, this looks largely like an Audi Q7. What if we told you, though, that it was actually a Bentley? This may be one of the very first sets of images we've seen of the aristocratic brand's SUV. Based on the borrowed Audi bodywork, however, testing appears to be in the early stages.
While it may look like an Audi Q7, there are a number of giveaways. One of the more subtle are the British number plates, in place of the traditional German plates that would be found were this a mule for the next Q7. Other changes are more noticeable. According to our spies, this mule is much wider, while its fenders have also been enlarged to accommodate larger wheels and tires.
Out back, four exhaust pipes jut out from the lower fascia, while larger brakes are hidden behind black wheels. The big indicator that this is something special, though, can be seen in the front fascia. The heavily modified front clip is home to two massive intakes below the headlights. According to our spies, these conceal a pair of intercoolers. Whether they are for Bentley (and Audi's) twin-turbocharged, 4.0-liter V8 or the 6.0-liter W12 is unclear.

Next Audi R8 to share hybrid tech with Lamborghini Asterion

The second-generation Audi R8 isn't far away, but when it arrives, it could serve to seriously shake up the supercar market according to Audi research and development boss Ulrich Hackenberg.
Speaking to Car in the UK, Hackenberg confirmed quite unequivocally that a plug-in-hybrid model and a pure electric were coming. And as with the current R8, the next-gen model will borrow from Audi's Italian cousins at Lamborghini.
"We are able to make the R8 a plug-in hybrid," Hackenberg told Car. "The Lamborghini Asterion shows this is possible - that car uses the platform of the R8. We will see an increase in the efficiency of high-performance cars - they have to meet CO2 regulations of the future in order to survive."

Audi Airomorph is a sleek shape-shifting senior thesis

Eric Kim just graduated from the from the Art Center College of Design in Pasadena, CA, at the end of the spring 2014 semester, and for his senior thesis project he came up with this futuristic Audi endurance racer called the Airomorph. He even got some input Audi designer Kris Vancoppenolle.
The Airomorph imagines a future Audi racer for Le Mans that features adjusting fabric panels to fine-tune the car's aerodynamics as it laps the course - a technology inspired by catamaran racing. "I started from scratch and had the freedom to deliver and execute a white space design for the future," said Kim to Autoblog via email. It's also somewhat similar to the idea behind BMW Gina concept, although Kim says that wasn't an inspiration for his design. The body here is made from a single piece of a silver, expansion-resistant material stretched over a frame underneath. The fabric anchors at the wheels, front and rear section with movable cables, and hydraulic actuators pull the wires to shift the aero as needed.
The actual shape echoes Audi endurance racers from the past and present. In profile, you can easily see the current R18 with its arcing cockpit and fin down the rear. Of course, that's interpreted through a little bit of Blade Runner with the covered wheels sticking out from the body. The front shows the rectangular shapes from the earlier R15. There doesn't appear to be any way to actually see out of the vehicle, though.