11' 135i, Certified To 100k! Convertible, Xenon Headlights, Sport Package!!! on 2040-cars

Auto blog

Evo pits BMW M3 against Porsche Macan in drag battle

If you want to move five passengers in very rapid fashion and you've got a $75,000 budget, two newly introduced four-door models immediately come to mind - both are the highest performing vehicles in their respective segments. But which is faster off the line, to the 60-mile-per-hour benchmark or flat-out over an even longer run? Evo took both to paved aircraft runway to find out.
In lane one we've got the all-new Porsche Macan Turbo, which boasts a twin-turbocharged, 3.6-liter V6 rated at 400 horsepower and 406 pound-feet of torque. The Porsche is fitted with a seven-speed, dual-clutch gearbox, and the 4,244-pound crossover has the traction advantage of standard all-wheel drive. In lane two is the all-new BMW M3, powered by a twin-turbo 3.0-liter inline-six rated at 425 horsepower and 406 pound-feet of torque. It is also equipped with a seven-speed, dual-clutch gearbox, but only the rear wheels of the 3,595-pound sedan are driven. Both the BMW and Porsche arrive with launch control, which helps to remove driver error off the line.
Which automaker's launch control system is better off the line? Does all-wheel-drive grip give the crossover the advantage it needs to overcome its adversary's power-to-weight advantage? Will aerodynamics factor into the results? Which would you put in your garage, and why? The video may surprise you.

2013 Dinan S3 BMW 550i

Steve Dinan has been enhancing BMW models since 1979. But don't throw his company into the ring with the dozen or so other tuners who tweak, tinker and piggyback upgrades on the famed German marque. Dinan is a tuner, but it's also an engineering firm that writes its own software, builds its own parts and then backs everything it does with a factory-grade warranty. That sort of fastidiousness comes at a price, but most of its customers - including the powerhouse of BMW Motorsport - rely on Dinan to help them come out on top.
In stock form, BMW's 550i is a formidable four-door with a twin-turbocharged 4.4-liter V8 rated at 400 horsepower and 450 pound-feet of torque. While those figures allow it to run with quick company (0-60 in 5.0 seconds, according to the automaker), Dinan puts the sedan's kettle on full boil with its S3 package. Starting with the engine, the performance engineering firm bolts on larger turbochargers, air-to-water intercoolers, a trick strut tower brace cold air intake, a quad-pipe free flow exhaust and its own engine management software. Pump in some premium fuel, and the result is 542 horsepower and 587 pound-feet of torque. Power is sent through the stock eight-speed automatic to a limited slip rear differential (Dinan will upgrade xDrive all-wheel drive models, too).
The Dinan S3 also features and extensive suspension upgrade that includes new front camber arms and low compliance rear control arms (engineered to reduce understeer and improve turn-in). The stock dampers are retained, but new bump stops are installed along with new springs. Overall, the car rides about a half-inch lower than stock to improve roll rate. To reduce unsprung weight, forged 20-inch HRE Performance wheels are fitted at all four corners (wearing Michelin Pilot Super Sport tires - 275/35ZR20 up front and 295/35ZR20 in the rear). Lastly, the company remaps the factory Electronic Damper Control (EDC) software with its own Dinan Shockware to work in conjunction with the new enhancements.

BMW invests in carbon fiber for use beyond i and M models

The immense amount of resources BMW has poured into its i brand program hasn't stopped, and recent developments indicate it's likely to pay off for BMW and BMW buyers outside the i brand. The i8 has already sold out its first year run, the i3 racked up 10,000 orders before it even went on sale and is already the subject of public discussion about being stretched into an i5, and a new investment in carbon fiber production has the automaker talking about CFRP use in non-i and non-M models.
BMW and SGL Group got together to form SGL Automotive Carbon Fibers (ACF), and the joint venture produces all of the CFRP for the i3 and i8 on two production lines at its plant in Moses Lake, Washington. After already investing $100 million to increase capacity, BMW has announced that another $200 million will add four more production lines, tripling production from 3,000 tons per year to 9,000 tons. When the expansion is complete in 2015, BMW says the Moses Lake facility will be the world's largest carbon fiber plant.
That's a lot of weave and the long view is that it will find its way into core models, with BMW exec Dr. Klaus Draeger saying, "As part of an intelligent mix of materials, we will apply carbon also beyond our BMW i and BMW M models in the future," and be able to do so "at competitive costs and in large quantities."