128i 1 Series Low Miles 2 Dr Coupe Automatic Gasoline 3.0-liter Dual Overhead C on 2040-cars

Auto blog

BMW recalls diesel X5 models over fuel filter heater

BMW has announced that it is recalling 1,540 examples of its 2009 and 2010 X5 xDrive35d crossovers produced between June 13, 2009 and November 9, 2009.
According to the National Highway Traffic Safety Administration, the model's fuel filter heater, which warms up the diesel fuel at low outside temperatures, can experience an electrical overload condition that may cause it to become permanently activated. This means the fuel filter heater could remain activated even when the ignition is off, which could lead to a dead battery. It could also lead to overheating, possibly resulting in a fire.

BMW to change model designations, further yet from actual displacement?

Once upon a time, you could look at the back of a trunk lid of a BMW and come up with a pretty fair idea of what sat under its hood. For example, a 320i was a 3 Series with a fuel-injected, 2.0-liter engine, a 328i was a 3 Series with a fuel-injected, 2.8-liter engine and a 328Ci was a two-door 3 Series with the same engine. Those were good days.
Today, though, that simplicity is dead and gone. A 328i now has a 2.0-liter engine, just like the 320i, while the simple "C" designation that was affixed to two-door models has been replaced with a "4," so we have a 428i and a 435i. It gets worse, though. A 550i uses a 4.4-liter, twin-turbocharged V8 (it should be a 544ti, although we'd be willing to hear an argument for "tti") and a 740i uses a 3.0-liter, turbocharged six-cylinder, which is the same engine found in a 535i. It's madness.
And, well, it's about to get madder, if a post on a BMW enthusiast forum is to be believed. According to f30post.com, we could see a shakeup in at least the 3 and 4 Series nomenclature, thanks to an impending refresh that will see the addition of new, turbocharged four- and six-cylinder engines, codenamed B48 and B58, respectively.

BMW reveals full details on M235i Racing

We were suitably excited when BMW first announced the imminent arrival of the M235i Racing. After all, what's not to like about a factory-prepared racecar with 333 horsepower you can pick up for just eighty grand? Now BMW has released the full details on the latest addition to its racing portfolio, where it joins the M3 DTM, M3 GT4, Z4 GTE/GT3 and 320 TC in a growing family of competition machinery prepared by BMW Motorsport.
Based on the new 2 Series coupe, the M235i Racing is the first M Performance model for the track, and boasts the line's most powerful engine: the 3.0-liter twin-turbo straight six has been optimized to 333 horsepower and 332 pound-feet of torque. A mechanical limited-slip differential helps transfer the power to the track surface, along with race-tuned ABS, DSC and traction control.
Four-pot calipers up front and two-pot calipers in the rear shave off speed for the corner and are packed inside the 18-inch alloys, with KW dampers and H&R suspension components. Inside there's a six-point racing harness and Recaro bucket surrounded by an FIA-certified roll cage, and customers can even have an extra seat installed to take passengers for ride-alongs. All of which can be yours for €59,500.00 - equivalent to $82k at today's rates, before taxes.