2007 Bmw 335ci Coupe - Superclean - on 2040-cars

Auto blog

BMW brings first diesel 7 Series to US with $82,500* 740Ld xDrive

After almost 40 years on the market, there are probably few things the BMW 7 Series hasn't offered, but when it comes to the US market, one of those things just happens to be a diesel engine. That is all about to change, however, as BMW announced that it will unveil the 2014 740Ld xDrive at the Chicago Auto Show before sales commence later in the spring.
Offered only on long-wheelbase models with standard all-wheel drive, the new diesel 7 is powered by BMW's 3.0-liter inline-six producing 255 horsepower and a stout 413 pound-feet of torque peaking between 1,500 and 3,000 rpm. While BMW has yet to release any type of fuel economy figures, it did say that its diesel technology is usually good for an improvement of 25 to 30 percent over the gas models - just for fun, that means that the 740 Ld xDrive could get as much as 24.7 miles per gallon in the city and 36.4 mpg on the highway, but that's just doing the math and there is nothing official behind those numbers. Acceleration will take a little longer than in the 740Li xDrive (shown above) with BMW stating 6.1 seconds from 0-60 compared to 5.4 seconds for the gas model.
Another small increase over the gas version will be in price, with the 740Ld xDrive getting a starting MSRP of $82,500 (*not including $925 for destination), which is just a $1,500 bump over the 740Li xDrive. For comparison, the Audi A8L TDI starts at $78,800, while the previous-gen Mercedes S350 Bluetec was priced at $93,000. Scroll down for more info on the new diesel-powered 7 Series, and stay tuned to our live coverage from Chicago in a couple weeks as we'll have live images and hopefully more info.

2014 BMW 4 Series Coupe officially debuts, priced from $41,425*

Well, that didn't take long. Less than two hours after the first images of the 2014 BMW 4 Series Coupe leaked onto the Internet, we've been given the go-ahead to publish the whole kit and caboodle. And while we won't say we told you so, it looks as though the car's official details are standing true to our earlier predictions.
In other words, BMW will offer the 4 Series in 428i and 435i models, both of which can be had with xDrive all-wheel drive. Just like in the 3 Series, the 428i is powered by a 2.0-liter turbocharged inline four-cylinder engine, good for 240 horsepower and 255 pound-feet of torque, and the 435i gets BMW's turbocharged 3.0-liter inline-six making 300 hp and 300 lb-ft. In three of the four models, both a six-speed manual and eight-speed automatic transmission are available; the 428i xDrive can only be had with the auto 'box. The 428i (with rear-wheel drive, we assume) can hit 60 miles per hour in 5.7 seconds (though BMW doesn't specify with which transmission), and the 435i will do that same sprint in 5.3 seconds with the manual and five seconds flat with the eight-speed auto.
We've already dissected the 4 Series' visuals, but the numbers show just how different it is from the 3 Series sedan. The 4 Coupe is one-tenth of an inch longer overall, while riding on the same 110.6-inch wheelbase, is 0.6 inches wider, and has a roofline that's a full 2.7 inches closer to the ground. It looks sleek, incorporating BMW's new design language from the 3 Series with an overall profile that's similar to the larger 6 Series coupe.

Researchers halfway to cutting carbon fiber costs by 90%

Carbon fiber has been utilized for decades to build racecars, as a means to cut weight while maintaining strength. But until recently, the space-age material has been largely absent from the street on anything but supercars because of the expense to use it. Recently, BMW signaled a major shift in that trend when it starting using carbon fiber reinforced plastic panels on the i3 and i8. This relatively small scale start might be just the beginning; the German company believes that a breakthrough to inexpensively manufacture the lightweight stuff is just on the horizon.
MAI Carbon Cluster Management GmbH counts BMW, Audi, Airbus, the German government and many other organizations as supporters, and it's researching how to make carbon fiber cheaper to produce, according to Automotive News Europe. The company thinks it can reduce costs by 90 percent in the near future. "We've certainly reached a halfway point on our cost-cutting target for suitable carbon-fiber parts," said project head Klaus Drechsler to Automotive News Europe.
Unfortunately, it isn't entirely clear just what MAI Carbon is doing to make such a huge leap possible. However, a recent post on the company's website talks about a new form a carbon fiber using a thermoplastic matrix that could be cured in less than three minutes. That's compared to about 90 minutes in the traditional process with an autoclave.