1998 Bmw 528i (e39) Black On Black On Black on 2040-cars

Auto blog

BMW Pininfarina Gran Lusso Coupe and Concept 90 pics from Villa d'Este

Royalty and the ultra-wealthy rubbed damp shoulders at this past weekend's Concorso d'Eleganza Villa d'Este on the shores of Italy's Lake Como, but even the rain couldn't extinguish the excitement generated by the millions of dollars of cars and bikes on display. Nowhere was this more true than with BMW, which marked the occasion with the reveal of two stunning concepts with six wheels between them - the shark-nosed Pininfarina Gran Lusso Coupe and the retrosexual Concept 90 motorcycle.
Conceived with Italian design house Pininfarina, the Gran Lusso Coupe is a power broker on 21-inch wheels. While we're not completely sold on every element of its design, this twelve-cylinder two-door concept moves us more than the current 6 Series, and not just because it has four more cylinders underhood and 48,000-year-old kauri wood paneling inside. BMW is sadly mum on production hopes, but we're not entirely optimistic - the company has graced us with a number of attractive concepts at Villa d'Este before, only to pack them away again without ever affording them a production future.
If one of these concepts has a better shot at finding its way into dealers, we have to believe it's the Concept 90 under the BMW Motorrad umbrella. Designed to celebrate the 40th anniversary of BMW's R 90 S, we think this Roland Sands Design air-cooled boxer would look fantastic on today's streets, especially with the rising popularity of vintage motorcycles and cafe racers.

BMW brings first diesel 7 Series to US with $82,500* 740Ld xDrive

After almost 40 years on the market, there are probably few things the BMW 7 Series hasn't offered, but when it comes to the US market, one of those things just happens to be a diesel engine. That is all about to change, however, as BMW announced that it will unveil the 2014 740Ld xDrive at the Chicago Auto Show before sales commence later in the spring.
Offered only on long-wheelbase models with standard all-wheel drive, the new diesel 7 is powered by BMW's 3.0-liter inline-six producing 255 horsepower and a stout 413 pound-feet of torque peaking between 1,500 and 3,000 rpm. While BMW has yet to release any type of fuel economy figures, it did say that its diesel technology is usually good for an improvement of 25 to 30 percent over the gas models - just for fun, that means that the 740 Ld xDrive could get as much as 24.7 miles per gallon in the city and 36.4 mpg on the highway, but that's just doing the math and there is nothing official behind those numbers. Acceleration will take a little longer than in the 740Li xDrive (shown above) with BMW stating 6.1 seconds from 0-60 compared to 5.4 seconds for the gas model.
Another small increase over the gas version will be in price, with the 740Ld xDrive getting a starting MSRP of $82,500 (*not including $925 for destination), which is just a $1,500 bump over the 740Li xDrive. For comparison, the Audi A8L TDI starts at $78,800, while the previous-gen Mercedes S350 Bluetec was priced at $93,000. Scroll down for more info on the new diesel-powered 7 Series, and stay tuned to our live coverage from Chicago in a couple weeks as we'll have live images and hopefully more info.

Researchers halfway to cutting carbon fiber costs by 90%

Carbon fiber has been utilized for decades to build racecars, as a means to cut weight while maintaining strength. But until recently, the space-age material has been largely absent from the street on anything but supercars because of the expense to use it. Recently, BMW signaled a major shift in that trend when it starting using carbon fiber reinforced plastic panels on the i3 and i8. This relatively small scale start might be just the beginning; the German company believes that a breakthrough to inexpensively manufacture the lightweight stuff is just on the horizon.
MAI Carbon Cluster Management GmbH counts BMW, Audi, Airbus, the German government and many other organizations as supporters, and it's researching how to make carbon fiber cheaper to produce, according to Automotive News Europe. The company thinks it can reduce costs by 90 percent in the near future. "We've certainly reached a halfway point on our cost-cutting target for suitable carbon-fiber parts," said project head Klaus Drechsler to Automotive News Europe.
Unfortunately, it isn't entirely clear just what MAI Carbon is doing to make such a huge leap possible. However, a recent post on the company's website talks about a new form a carbon fiber using a thermoplastic matrix that could be cured in less than three minutes. That's compared to about 90 minutes in the traditional process with an autoclave.