2000 Bmw M5 Base Sedan 4-door 5.0l on 2040-cars

Auto blog

Alpina D3 Bi-Turbo torquing its way toward Frankfurt

Few tuners benefit from the kind of factory support that Alpina does, giving the pseudo-aftermarket firm nearly as much official status as BMW's own M division. And this is its latest product.
Set to debut, as expected, at the Frankfurt Motor Show this week is the new Alpina D3 Bi-Turbo, which you can consider, for all intents and purposes, the diesel M3 that BMW never built. While the outgoing D3 (which was Alpina's best-selling model) used a four-cylinder engine, Autocar reports that the new model packs a 3.0-liter, twin-turbo inline-six diesel to drive a respectable 345 horsepower but a mammoth 516 pound-feet of torque to either the rear wheels or all four through the optional availability of xDrive. (European buyers will also be able to choose between sedan and wagon bodystyles.)
The engine is the same as you'd find in the XD3 and D5 (Alpina's diesel performance versions of the X3 and 5 Series, respectively), but in the lighter 3 Series form can propel the D3 Bi-Turbo up to 62 miles per hour in 4.6 seconds and on to an Autobahn-crunching top speed of 173 mph. And as per Alpina tradition, visual cues are minimal, with a subtly optimized aero kit and 19- or available 20-inch alloy wheels. Unfortunately, the 7 Series-based B7 is the only Alpina we get on this side of the Atlantic, but an oil-drenched performance enthusiast can dream.

BMW unleashes 160-hp S 1000 R streetfighter motorcycle

BMW Motorrad released the S 1000 RR superbike in 2010, but for those who'd like to take it down a (small) notch, the German motorcycle maker introduced the 2014 S 1000 R, a slightly less-ballsy version of the range-topping superbike, at EICMA on Tuesday.
In its transformation from 193-horsepower superbike to 160-hp sportbike, BMW detuned the 999cc inline four-cylinder engine a bit by lowering the redline from 13,000 RPM to 11,000 RPM, where peak power is made. Torque is rated at "approximately" 83 pound-feet (the RR makes 82.5 lb-ft), but more importantly, engineers tweaked the torque delivery in the R's favor by redesigning the cylinder-head ducts, modifying the camshaft profiles and reprogramming the engine management system. The result is seven lb-ft more torque than the RR up to 7,500 RPM. The R's torque peak occurs at 9,250 RPM.
The bike comes standard with ASC (automatic stability control) and "Race" ABS. Riders can choose between two modes, "Road" and "Rain," which adjust ABS and ASC settings to suit dry or wet roads. DTC (dynamic traction control) is available as an option, and with two modes, "Dynamic" and "Dynamic Pro," the system optimizes traction and helps riders achieve maximum acceleration.

BMW rolls out new M4 safety car for DTM

Ever since revealing the M4 on nearly five months ago, BMW has been hard at work getting its new muscle coupe out on the track. It's made a touring-car version to compete in DTM and a safety car to set the pace at MotoGP races, and now it's combined both into a new safety car for DTM as well.
The ninth M4 on the DTM grid is based on the production version, but fitted with numerous upgrades over the course of a two-month conversion process. For starters, it's been equipped with nearly exterior component from the M Performance Parts catalog, including the quad-tipped exhaust, front splitter, rear spoiler and diffuser, blacked-out grille, special mirror caps, side sills... the works. But that's not the end of the story.
BMW M GmbH also gutted the interior, removing the rear bench and replacing it with a roll cage. It's got a pair of Recaro racing buckets with Schroth harnesses, plus special LED emergency lighting, radio communication system and, of course, special livery (albeit nowhere near as cool as the MotoGP one) to distinguish it as the official safety car when it makes its debut at the Nürburgring on August 17.