2007 Bmw X3 Suv on 2040-cars

Auto blog

BMW adds new entry-level 320i model, priced from $33,445*

Fans of the new BMW 3 Series here in the US have likely been waiting for one of two models to arrive: the new M3 or the diesel-powered 335d. Well... keep waiting just a little bit longer. Here at the Detroit Auto Show, BMW is showing off the new entry-level 320i that will join the 3 Series lineup this spring, and rather than bringing added performance or efficiency, this car is boasting affordability above all. The 320i has been on sale in other markets since the current-generation 3 Series was introduced, but it goes on sale in the US with a starting price of $33,445 (*)including $895 for destination, which is $3,405 less than the current starting price of BMW's well-liked sedan.
In other countries, the 320i uses either a 1.5- or a 2.0-liter inline-four (both turbocharged), and the US version of the car will be getting the latter engine producing 180 horsepower and 200 pound-feet of torque. For comparison, the current 328i, which uses this same engine, produces 240 hp and 255 lb-ft of torque. As expected, performance of the 320i will suffer with BMW estimating a 0-60 mile-per-hour time of 7.1 seconds, but it still has the same 130 mph top speed as the 328i. Oddly enough, despite the lower output, BMW's expected fuel economy for the 320i equipped with rear-wheel-drive and the eight-speed automatic transmission actually matches that of the current 328i with 23 miles per gallon city and 33 mpg highway, and those numbers are actually lower than the 328i with the manual gearbox.
It sounds like most of the usual 3 Series options will be available on the budget-minded 320i, including the choice of xDrive all-wheel drive, BMW Assist and numerous packages including a Sport pack and Premium pack. For a lot more information on the 320i, most of it general information on the F30 3 Series, scroll down for BMW's press release.

2013 Dinan S3 BMW 550i

Steve Dinan has been enhancing BMW models since 1979. But don't throw his company into the ring with the dozen or so other tuners who tweak, tinker and piggyback upgrades on the famed German marque. Dinan is a tuner, but it's also an engineering firm that writes its own software, builds its own parts and then backs everything it does with a factory-grade warranty. That sort of fastidiousness comes at a price, but most of its customers - including the powerhouse of BMW Motorsport - rely on Dinan to help them come out on top.
In stock form, BMW's 550i is a formidable four-door with a twin-turbocharged 4.4-liter V8 rated at 400 horsepower and 450 pound-feet of torque. While those figures allow it to run with quick company (0-60 in 5.0 seconds, according to the automaker), Dinan puts the sedan's kettle on full boil with its S3 package. Starting with the engine, the performance engineering firm bolts on larger turbochargers, air-to-water intercoolers, a trick strut tower brace cold air intake, a quad-pipe free flow exhaust and its own engine management software. Pump in some premium fuel, and the result is 542 horsepower and 587 pound-feet of torque. Power is sent through the stock eight-speed automatic to a limited slip rear differential (Dinan will upgrade xDrive all-wheel drive models, too).
The Dinan S3 also features and extensive suspension upgrade that includes new front camber arms and low compliance rear control arms (engineered to reduce understeer and improve turn-in). The stock dampers are retained, but new bump stops are installed along with new springs. Overall, the car rides about a half-inch lower than stock to improve roll rate. To reduce unsprung weight, forged 20-inch HRE Performance wheels are fitted at all four corners (wearing Michelin Pilot Super Sport tires - 275/35ZR20 up front and 295/35ZR20 in the rear). Lastly, the company remaps the factory Electronic Damper Control (EDC) software with its own Dinan Shockware to work in conjunction with the new enhancements.

BMW is the US auto industry's leading exporter

Which automaker do you think ships the most cars out of North America, one of the Detroit Three or perhaps one of the Japanese automakers? Nope. It turns out the BMW's Spartanburg, SC, factory is the biggest automotive exporter from the continent in the United States. According to a recent profile by Bloomberg looking at the plant's 20th anniversary, Bimmer's southern ops sends out more vehicles than all of Michigan combined.
When the Spartanburg factory opened up in 1994, its success was hardly assured, largely because of South Carolina's relatively small economy at the time. However, BMW picked the site because of its proximity to East Coast shipping that made it easier to move engines and transmission in from Germany and export vehicles back to Europe, according to Bloomberg. The Bavarians clearly made the right choice.
Today, the plant has developed into an absolute powerhouse. The factory currently assembles the X3, X4, X5 and X6 and exports about 70 percent of the vehicles built there. Things are only getting better. BMW is investing $1 billion through 2016 to boost annual production from the current 300,000 units up to 450,000 and to build a new flagship crossover called X7. The expansion also adds a further 800 jobs there to take total employment up to about 8,800. Including the latest financing, BMW has put over $7.3 billion into the factory since it opened, notes Bloomberg.