2010 Bmw X5 35d Xdrive Diesel Navigation 3rd Row Seat Warranty on 2040-cars

Auto blog

Giles Taylor succeeds Ian Cameron as head of Rolls-Royce design

Back in the day, a Rolls-Royce looked pretty much the same as a Bentley, but with a different grille. Once BMW took over Rolls-Royce, however, it was faced with the challenge of visually separating itself from its former sister brand. And most would agree that it did so pretty well. But its cars have looked pretty much the same ever since. What Rolls-Royce needs, then, is a bit of a design shake-up. And that's just what this latest appointment could bring.
After a baker's dozen years as design director at Rolls-Royce (and twenty years designing for the BMW Group altogether), Ian Cameron is retiring from his post. In his place, Rolls-Royce has named Giles Taylor as its new director of design. In his new capacity, Taylor will report directly to BMW Group chief designer Adrian van Hooydonk, and be responsible for all design matters related to the Rolls-Royce brand and its products.
Taylor was promoted to the role from his previous position as head of exterior design for the marque, a position he's held for barely more than a year. We'll be eagerly watching to see what the veteran British car designer has in store for the future of Rolls-Royce. In the meantime you can read the full announcement below.

BMW i3 gets official worldwide

Even though we recently drove a near-production version of the BMW i3, the car still wore light exterior and interior camouflage. Today, BMW took off that little bit of camo and made a big announcement: The i3 will go on sale in the US for $41,350 in the second quarter of 2014. That does not include any state or federal incentives that could lower the price or the $925 destination fee. The i3 will debut with three trim levels, which BMW is referring to as Worlds: Mega (standard in the US), Giga and Tera.
The BMW i3 is chock-full of new technology afforded by its design as an EV from the start of development, which has resulted in a vehicle layout unique to the i3. BMW has named it LifeDrive architecture, and it features the Life Module and the Drive Module. The Life Module is the i3's pillar-less passenger cell, which is the first mass-produced monocoque made of carbon fiber reinforced plastic (CFRP). The tougher-than-steel material is also 30-percent lighter than aluminum, which contributes to the i3's relatively light weight of 2,700 pounds (preliminary US figure) and, in turn, increases its energy efficiency. Expect more of this technology to find its way into future BMWs.
The Drive Module, a 100-percent aluminum chassis mounted under the Life Module, houses everything that makes the i3 go. It includes the 22-kilowatt, 450-pound lithium ion battery mounted as centrally as possible, and provides power to a rear-mounted electric motor that turns the rear wheels. With 170 horsepower and 184 pound-feet of torque from zero rpm, the single-gear i3 can accelerate from 0-30 miles per hour in 3.5 seconds and 0-60 mph in about 7.0 seconds, but it has a top speed of only 93 mph. BMW says the i3 has a real-world EV range of 80-100 miles, and the standard charger can fill the battery in three hours. Opt for the SAE DC Combo Fast Charger and 30 minutes is all it takes for a full charge; 20 minutes will bump the battery to 80 percent. For customers who have range anxiety, BMW gives them the option to install a 34-hp, 650cc two-cylinder generator as a range extender for the electric drive system.

BMW M3 and M4 CSL not in the cards

We aren't sure whether to file this one under "good news" or "bad news." BMW confirmed to Top Gear that there "are no plans" for lightweight versions of the new M3 and M4, in the same vein as the E46 M3 CSL (despite rumors to the contrary). The reason?
"There wasn't a CSL on the previous generation, and the way we look at it is like this: the CSL was great because it had this real focus on lightweight engineering. But we've already done that with these new cars. We've made them as light as possible - they come in under 1500 kilograms (3,306 pounds), which for a car like this is incredible," said Matt Collins, BMW's product manager for small to medium cars.
Now, as much as we love the idea of a hardcore version of any car, we appreciate BMW's point of view that the newest Ms are already as light and tough as they need to be. Collins elaborated, saying, "Rather than doing a halfway house to begin with and then rolling out a CSL, we thought we'd make the 'real' car as light as we possibly could. So we've no plans whatsoever to make a lighter, harder version just yet."