Find or Sell Used Cars, Trucks, and SUVs in USA

2000 Bentley Continental R Mulliner on 2040-cars

US $22,400.00
Year:2000 Mileage:37599 Color: Gray /
 Tan
Location:

Prescott, Arizona, United States

Prescott, Arizona, United States

Rare Continental R Mulliner
One of Only 28 Produced Worldwide
Introduced at the Geneva Motor Show in March of '99, Bentley's Continental R Mulliner range featured a turbocharged
6.75 litre V8 boosted to 420 bhp and a stump-pulling 650 lb-ft of torque. It could be pushed to a top speed of some
170 mph with a 0-60 mph time of 5.6 seconds with the computer nannies left on. If an owner was willing to shred
their tires for 50 or more yards, it was capable of 5.1 second times with the traction control off and abusive
driving practices. The prime example on offer here has seen none of this abuse and remains in excellent condition.
Chassis number 63302 is one of 28 Continental Rs produced worldwide in 2000 with coachwork by Mulliner.
Options include drilled pedals, power mirror, contrasting second interior color and a 6 CD changer.
Paint is in excellent condition with no evidence of damage.

Auto Services in Arizona

Vince`s Automotive Repair ★★★★★

Auto Repair & Service, Brake Repair, Auto Transmission
Address: 341 S Olsen Ave, Tucson
Phone: (520) 624-6131

Ultimate Imports ★★★★★

Auto Repair & Service, Automobile Parts & Supplies, Auto Transmission
Address: 1900 N McClintock Dr Suite 15, Tempe
Phone: (480) 305-5756

Tire & Auto Service Center ★★★★★

Auto Repair & Service, Tire Dealers
Address: 62 Capri Ln, Desert-Hills
Phone: (928) 855-8473

The Ding Doctor ★★★★★

Auto Repair & Service
Address: New-River
Phone: (623) 332-2546

Team Ramco ★★★★★

Auto Repair & Service, Automobile Parts & Supplies, Automobile Accessories
Address: 4701 E Gila Ridge Rd, Somerton
Phone: (928) 344-5360

Stockton Hill Tire ★★★★★

Auto Repair & Service, Tire Dealers
Address: 3979 Stockton Hill Rd, Kingman
Phone: (928) 757-7117

Auto blog

Bentley unveils 202-mph Continental GT Speed Convertible

Tue, 01 Jan 2013

That purple haze all in your eyes is the 2013 Bentley GT Speed Convertible. The cynical view is, "Bah, take a GT Speed and cut the top off. There. Pass the salt, please...". But when you're Bentley, more than 90 years old, and charging these kinds of ducats, there's no reason to take the cynic's shortcut. So of course the GT Speed Convertible gets all of the Speed-family accoutrements: matrix radiator grille hiding a twin-turbocharged, 6.0-liter W12 with 616 horsepower and 590 pound-feet of torque, eight-speed ZF transmission enabling 15 percent better fuel economy, beefier lowered suspension, larger rifled exhaust tips, inlet manifold finished in black crackle and a Mulliner Driving Specification cabin.
Among the many refinements added to the convertible, though, are neck warmers in the seats, the 21-inch wheels unique to this car, class-leading stiffness - admittedly, it's a very small class, but its torsional rigidity of 22,500 Nm/degree is only 500 Nm below that of the Lamborghini Gallardo coupe. The stiffening required to achieve that number will undoubtedly have something to do with the 485-pound weight gain over the GT Speed Coupe.
Still, when the GT Speed Convertible weighs 5,500 pounds, what's a few hundred between friends? More importantly, the weight doesn't scuttle performance: 0-60 comes in 4.1 seconds, a tenth shy of the coupe. The gap stretches as you approach The Ton, the GT Speed Convertible needing just 9.7 seconds to get there, the coupe just nine seconds. Trust us, though, everyone will be too busy blasting along to notice. Everyone will want to pack light, however, because the Speed Convertible loses 3.5 cubic feet of trunk space. It remains the fastest four-seat convertible in the world with a 202-mph top speed.

Average Bugatti owner has 84 cars, 3 jets, 1 yacht

Sun, 05 Oct 2014

Between Audi, Porsche, Lamborghini, Bentley and Bugatti, the Volkswagen Group has no lack of prestige marques under its umbrella. And while some of these marques may produce models that compete against each other, each seems to be profitable enough in its own right to justify its existence. But what about Bentley and Bugatti? Surely these marques cater to the same customers, right?
Not according to their shared CEO. "The clientele between Bentley and Bugatti is remarkably different," said Wolfgang Dürheimer in an interview with Bloomberg. "The Bentley customer on average owns 8 cars. The average Bugatti customer has about 84 cars, 3 jets and 1 yacht."
That may be a slight exaggeration (we'd have expected three yachts and one jet), but it puts things into perspective: Bentleys are for the one percent. Bugattis are for the one percent of that one percent. Which only goes to show why it's taken Bugatti over eight years to sell 450 Veyrons - a number of units it would take Bentley about two weeks to move, albeit at about one tenth the price.

Bentley wants to get into the coachbuilding business

Thu, 10 Jul 2014

There was a time when a customer would buy a chassis from an automaker like Bentley and then take it to a coachbuilder to have whatever bodywork they wanted put on it. The practice was particularly prevalent in Bentley's earlier days, but the industry has progressed in such a way - with tighter regulations and unibody construction - that such a practice is no longer feasible. But Bentley wants to get back into that business.
Speaking to UK trade publications recently, Bentley sales chief Kevin Rose indicated that the company is looking into setting up a special division within itself to meet the demands of extremely wealthy customers who want to commission their own coachbuilt custom creations. It's an emerging trend that's seen Ferrari Special Projects build one-offs like the F12 TRS and SP12 EC and McLaren Special Operations the outlandish X-1, and Bentley wants to get in on the action.
It wouldn't be the first even to rebody a contemporary Bentley in recent years. Carrozzeria Touring Superleggera offers the Flying Star (pictured above) that turns the Continental GT into a shooting brake, and Dany Bahar's new coachbuilding outfit Ares plans to do the same. By bringing it in-house, however, Bentley would be able to pick the chassis up off the assembly line at the right time and provide the necessary support and factory backing.