Find or Sell Used Cars, Trucks, and SUVs in USA

1986 Buick Regal T-type Coupe 2-door 3.8l Turbocharged on 2040-cars

US $15,999.00
Year:1986 Mileage:110153 Color: Black /
 Burgundy
Location:

Massapequa, New York, United States

Massapequa, New York, United States
Transmission:Automatic
Body Type:Coupe
Engine:3.8L 3800CC 231Cu. In. V6 GAS OHV Turbocharged
Vehicle Title:Clear
Fuel Type:GAS
For Sale By:Private Seller
Condition:
Used: A vehicle is considered used if it has been registered and issued a title. Used vehicles have had at least one previous owner. The condition of the exterior, interior and engine can vary depending on the vehicle's history. See the seller's listing for full details and description of any imperfections. ...
VIN (Vehicle Identification Number)
: 1G4GK4777GP423738
Year: 1986
Number of Cylinders: 6
Make: Buick
Model: Regal
Trim: T-Type Coupe 2-Door
Warranty: Vehicle does NOT have an existing warranty
Drive Type: RWD
Options: CD Player
Mileage: 110,153
Power Options: Air Conditioning, Cruise Control, Power Locks, Power Windows, Power Seats
Exterior Color: Black
Interior Color: Burgundy

I am selling my 1986 Buick Regal T-Type  Black with Burgundy Interior with T-Tops A/C, P/W, P/Locks, Cruise, Tilt and 6 way Power drivers seat that is in Excellent Condition. I bought this car 9 years ago in decent shape with a blown motor. I spent a couple of years collecting new parts and restoring the car. For the purpose of this listing I will make evey effort to represent this car accurately.

The orignal block was junk so I purchase a block from a 86 Grand National. I then sent it to an engine builder that I knew with a great reputation. This is what was done:

The block was boiled and checked for cracks. It was then bored .30 over, decked and balanced and filled with Speed Pro Forged pistons and rods with new rings and pins.

The steel crank was magnafluxed, polished and balanced. New bearings were added.

A new Full Throttle 208 Buick cam, bearings and brass freeze out plugs were added.

I reused the orignal heads that were 1.77/1.50.  They were ported, polished and decked. New valves, guides, seals and springs were installed. Head studs were installed and cometic .60 gaskets were used to keep the compression at the stock level. High rev lifters from Kirban performance and Manley pushrods were installed with a high volume oil pump.

A 65mm thottle body and plenum with a RJC power plate topped the motor with 42 1/2 injectors with a new chip to match and a new injector harness

A new timing chain, flywheel and an adaptor for a larger oil filter were installed.

The turbo that was in the car is a Garrett. I had it completely rebuilt with a adjustable wastegate and was told that it was from a 1987 GNX.

The intercooler was stock and in good condition. I added a new shroud and scoop.

Ceramic coated hedders and cross over pipe with copper hedder gaskets were installed. A 3" down pipe leads to a low restriction cat and a set of Hooker mufflers.

The radiator was removed boiled out and a new electric fan motor installed.

The 200R4 transmission was rebuilt by Select Performance with a 9 1/2 inch 3000 stall converter.

The stock driveshaft was balanced and new universal joints were installed. A driveshaft loop was also installed.

The rear is a Buick 8 1/2". I replaced the gears with a new set of 3.42s. I also replaced both axles with new stock ones. All the bearings, seals and gaskets were also replaced

I installed a new gas tank and sending unit with a high proformance fuel pump from Kirban with a hot wire kit added to the pump. A adjustable fuel pressure regulator and a fuel pressure gauge was installed under the hood.

I had a rebuilt (can't find them new) powermaster unit  installed. I installed new front brakes, calipers, slotted rotors, brake hoses and bearings. New rear soft brakes, drums and all the hardware was replaced. The proportioning valve was also replaced.

I replaced the tires and wheels with BF Goodrich Radial T/As 215/65/15s on 15x7 Weld Prostars in front and 275/60/15s on 15x8 Weld Pro Stars in rear.

The body was painted in 2008 and is in great condition with only a few nicks in it from driving it. The t-tops were completely rebuilt. I was able to find rebuilding kit with all new parts. All the weatherstripping was replaced on the t-tops, doors,door sills and trunk with new GM original pieces. The doors close like when they were new. I also had the D/S floorpan replaced with a new one as the t-tops were leaking on that side. They do not leak any more. The t-tops and the floor pan was coated with POR-15. I also replaced the headlight bezels and the emblems with new GM ones. The front air dams and both front and rear bumper fillers were also replaced. The windsheild was replaced and a new rear veiw mirror was attached.

The interior is burgundy cloth with a 45/55 split bench. The front drivers seat is 6 way power. The front seat bottoms was the only thing wrong with the seats. I had them removed and rebuilt with new foam and new material from a company in California who had bought up all the old GM material. The headliner was also replaced. The dashboard is in excellent condition. I replaced the power window motors with GM ones. The carpet was replaced and new carpeted floor mats with a T Type logo in front and turbo 6 emblem in back.

I added Auto Meter Ultra Lite gauges. The tach is 3 3/8 big and is mounted in the cigarette lighter. There are 2 5/8 Boost/vacuum, Oil pressure, Water temp and Volts gauges mounted above glove box. A Scanmaster 2 was also installed. I also installed a JVC am/fm/cd/ipod deck with new 6x9 speakers in rear an new 3 1/2 speakers in the dash. The radio is hooked up to a power antenna.

The car runs and drives great. I have never raced it on the track or street. I have gotten on it several times and was very happy with the proformance. I put about 3,500 miles on the car mostly driving it to car shows and weekend cruises.

The things that the car needs is the a/c needs to be charged, I charged it about 5-6 years ago and it worked fine but never used it since. The rear brakes sometimes lock up when cold. This in from the soft brake pads and new brake hardware. Every time I back it into the garage the new brake adjuster tightens up the brakes. I've had to loosen them up every couple of months. 

I have a folder full of receipts that will go with the car. If you have any questions please feel free to ask. The buyer will pay a non returnable 500.00 deposit via Paypal. The buyer is also responsible for shipping or picking the car up within 2 weeks. I know its a good amount of money but I perfer cash. If you want to pay by certified check you will have to wait until my bank has cleared it.

 

 

 

 

 

 

Auto Services in New York

Westchester Toyota ★★★★★

New Car Dealers, Used Car Dealers, New Truck Dealers
Address: 2167 Central Park Ave, Hastings-On-Hudson
Phone: (914) 779-8700

Vision Dodge Chrysler Jeep ★★★★★

Auto Repair & Service, New Car Dealers, Used Car Dealers
Address: 920 Panorama Trl S, Union-Hill
Phone: (585) 385-5700

Village Automotive Center ★★★★★

Auto Repair & Service, Auto Oil & Lube, Auto Transmission
Address: 61 N Country Rd, Wading-River
Phone: (631) 751-3200

TNT Automotive ★★★★★

Automobile Repairing & Service-Equipment & Supplies
Address: 142 Ralph St, Harrison
Phone: (973) 302-4099

Sterling Autobody Centers ★★★★★

Automobile Body Repairing & Painting, Used Car Dealers
Address: 1024 W Ridge Rd, North-Greece
Phone: (585) 621-2870

Sencore Enterprises ★★★★★

Auto Repair & Service, Used Car Dealers, Automobile Parts & Supplies
Address: 3818 State Route 31, Phelps
Phone: (315) 597-2886

Auto blog

Buick Envision CUV launches in China, is America next?

Fri, 29 Aug 2014

Buick is launching its new midsize Envision crossover in China at the Chengdu Motor Show, where it will slot between the subcompact Encore and larger Enclave. While it might be hard to muster too much excitement about a Chinese-market crossover, don't completely ignore this one. There's a very good chance it could be on sale in North America to fill the same hole in the brand's lineup over here, possibly as a 2016 model.
We recently spied the Envision completely undisguised as it was arriving at the Chengdu show for its debut. The CUV still looks like a stretched Encore from some front angles, but that isn't necessarily a bad thing. It's got a similar oversized grille, hood vents (presumably faux) and large greenhouse as its little brother. Where the midsize CUV differs is its prominent crease running down the side and the different rear treatment, with wing-shaped trim cutting into the taillights.
The interior looks like a pretty nice place to spend time, too, with a predictable mix of leather, wood and metal, and it should be quiet in there with its active noise cancelation system. Infotainment is provided by an eight-inch touchscreen with a touchpad and voice controls.

1969 Chevrolet Chevelle vs 1987 Buick GNX in Generation Gap showdown

Wed, 15 Oct 2014

Generation Gap generally tries to adhere to a theme for each episode, and for the final video from the Lingenfelter collection, the series might have its best idea yet - limited-production muscle cars from General Motors.
On one side you get a 1969 Chevrolet Chevelle COPO, and it's an absolute sleeper. Other than the SS wheels, this classic coupe looks practically bone stock, at least until the engine fires up. Under the hood is a 427-cubic-inch (7.0-liter) V8 making a claimed 425 horsepower and 460 pound-feet of torque. This was the sole year for the COPO package on the Chevelle, and Chevy only made about 323 of them.
The Chevelle's challenger is almost as rare and arguably just as cool. The 1987 Buick Grand National GNX looks just as mean today as when new. It eschews a traditional muscular V8 in favor of a 3.8-liter turbo V6 making a claimed 276 hp and 360 lb-ft, although that number is supposedly a bit underrated. Also, just 547 examples of the GNX version were ever built making it quite a collector's item too.

Next Buick Regal to inherit styling cues from Opel Monza concept

Mon, 06 Oct 2014

Ever look at a concept car from a foreign auto marque like Opel and wonder what relevance it will have to you as an American consumer? Well, we'll tell you: at least as far as the Opel Monza concept goes, it could mean a lot.
Speaking with Automotive News at the Paris Motor Show, Opel chief Karl-Thomas Neumann said, "You will see the Monza when you see the next Insignia." And the Insignia, we needn't point out, is essentially ported over to American showrooms as the Buick Regal.
The relationship between the Regal and Insignia only stands to grow closer as Opel design chief Mark Adams has also been charged with tightening the bonds between the two automakers positioned on opposite shores of the Atlantic. Adams also intends to imbue the next Insignia with more "premium brand values" in order to "add polish to the brand." Which in turn means that the Regal will be designed to look more upscale, too.