1974 Cadillac Sedan Deville 4 Dr - 472 V8 - Loaded - 87k Miles - 2nd Owner Car on 2040-cars

Auto blog

2014 Cadillac XTS gets 410-hp twin-turbo V6

General Motors told us so back in March, but it is now official: The twin-turbocharged 3.6-liter V6 announced for the 2014 Cadillac CTS will also join the options list for the 2014 Cadillac XTS. The LF3 engine puts out 410 horsepower and 369 pound-feet of torque in the XTS, however, which is 10 hp and 61 lb-ft down from its application in the CTS. It will be identifiable from the outside by a specific grille treatment and a badge on the decklid. The 3.6-liter V6 with 304 hp and 264 lb-ft holds steady as the standard engine, and both will be yoked to a six-speed automatic transmission with paddle shifters.
Also new for the front-wheel drive model for 2014 are updates that include electric power steering and optional Automatic Parking Assist that can maneuver the sedan into parallel parking spots. The three trims above standard - Luxury, Premium and Platinum - get Intellibeam headlights that automatically switch between high- and low-beam,
The four current trim levels remain but the list of optional extras for the higher specs grows with a rear-seat entertainment system equipped with DVD screens in the front seatbacks, memory settings for the front passenger seat and an armrest in the back seat fitted with radio and sunshade controls. The press release below has more info on all of the changes.

Cadillac SRX production moving to TN, next-gen Equinox going to Mexico

It's a good week for the town of Spring Hill, TN, as General Motors has announced that its factory in the city of 31,000 will receive a $185 million contract to produce engines. On top of that, the next-generation Cadillac SRX crossover will be built at the factory (NA models are presently built in Ramos, Arizpe Mexico), which was once famous for being the home of GM's now-defunct Saturn brand.
The factory is one of GM's six facilities around the globe that will screw together the company's new line of three- and four-cylinder Ecotec engines. Spring Hill currently builds the 2.0-liter, turbocharged Ecotec, as well as the naturally aspirated 2.4 and 2.5-liter variants.
Spring Hill's vehicle assembly lines were idled in 2009, but were reactivated in 2011. The SRX is just one of the products meant to benefit from last year's $350-million investment, and should have a positive impact, creating or retaining around 1,800 positions at the factory.

Cadillac planning its own engines, halo cars

Cadillac is in the midst of some big changes. It's got a new chief executive. It's taking some distance from parent company General Motors and moving to a new headquarters in New York. And it's instituting a new naming scheme that will allow not only for a more clear progression in its lineup, but also for more models. But that's not the end of the story. Not by a long shot.
Speaking with Automobile magazine, Cadillac's new president Johan de Nysschen revealed his intention to develop several new models and powertrains. For starters, he does not want Cadillac to continue borrowing engines from the GM parts bin, but intends to develop a new range of engines specifically for the luxury automaker. The program will likely start with smaller-capacity engines but eventually lead to new V8s as well, taking the place of the long-serving Northstar engine that finally ended its lifespan a few years ago after some two decades of production. Along with other technologies, de Nysschen envisions possibly sharing these powertrains with other GM divisions, but developing them first and foremost for Cadillac.
The bigger question, however, is where those engines would go, and de Nysschen had some thoughts to share on that front as well. For starters, the former Infiniti and Audi exec sees room for an even bigger sedan above the upcoming new CT6 that will cap the current range. Maybe even two of them. But that's not all. Johan wants to see Cadillac get (back) into the sports car game with a new halo model or two - something it hasn't really done since the Corvette-based XLR roadster. A pair of new crossovers are also said to be in the works, flanking the SRX on both sides with smaller and larger models.