2004 Cadillac Escalade Esv Limo 20 Passenger 200'' Stretch on 2040-cars

Auto blog

2016 Cadillac ATS-V blasts into LA

The first details about the 2016 Cadillac ATS-V recently hit the web ahead of the official debut at the 2014 Los Angeles Auto Show. Now, the latest model to wear Caddy's high-performance V moniker is officially official, and the specs are even better than initial rumors suggested.
The latest figures actually give the ATS-V a hair more power than first believed, with 455 horsepower and 445 pound-feet of torque pumping out of the twin-turbocharged 3.6-liter V6. With a standard electronic limited-slip differential keeping rear wheels in check, Cadillac claims that the model sprints to 60 miles per hour in 3.9 seconds and on to a top speed of 185 mph. Buyers have two transmission choices that both offer launch control: a six-speed manual featuring Active Rev Match and no-lift shifting, or an eight-speed automatic.
Thoroughly revised suspension and braking systems should also mean that the ATS-V excels at more than just going in a straight line. The chassis itself receives extra bracing to boost overall stiffness by 25 percent over lesser ATS models. On top of that, a host of suspension upgrades front and rear, including third-generation Magnetic Ride Control dampers, mean quicker steering response and a tighter ride. Plus, Brembo six-piston calipers up front and four-pistons in the rear should bring rapid deceleration. To tune it all to the driver's whim, the Performance Traction Management system gives five settings to choose from for stability and traction control.

Lansing builds its millionth Cadillac

Cadillacs are built at plants across North America. The Escalade is assembled in Texas, the SRX in Mexico and the XTS in Ontario. But the bulk of Cadillac's lineup - or the smaller members of the family, at least - are built in Michigan. And while the upcoming ELR will be built alongside the Chevy Volt at the Detroit/Hamtramck facility (which incidentally opened with the Cadillac Eldorado back in '86), the majority of those Cadillacs built in Michigan are handled by the Lansing Grand River Assembly Plant.
In fact, Lansing Grand River just celebrated its millionth Cadillac built. The landmark millionth vehicle is a new 2014 CTS sedan in Red Obsession Tintcoat. The facility opened in 2001 and has built Cadillacs almost exclusively since then, assembling the CTS and ATS model lines, though in a couple of years it will also handle production of the Chevy Camaro.

2015 Cadillac Escalade configurator lets you bling it your way

It's Friday, so there must be a new configurator to play with. While last week we showed you how to build your own McLaren 650S, today's ride is a bit more common. It's the 2015 Cadillac Escalade, a vehicle that you've been able to colorize since the end of last year, and which is sure to be an increasingly common sight on US roads in the coming months.
For those that have played with the build-your-Caddy tool, there's not much new here, aside from the vehicle being configured. The Escalade is available in three trims and two wheelbases, with prices spanning from the SWB, two-wheel-drive Standard, which starts at $72,690, on to the all-wheel-drive, long-wheelbase ESV Premium, which kicks off at $86,790. The options list, meanwhile, isn't hugely extensive. A rear-seat entertainment system and power-retractable side-steps (only available on the Premium trim) are the two notable options, while customers will have their choice of six exterior paints and two to three interior schemes, depending on the trim level.
Hop on over to Cadillac's consumer page and take a look.