Find or Sell Used Cars, Trucks, and SUVs in USA

1956 Chevy Bel Air 2-door Pro-street Project Car on 2040-cars

US $9,500.00
Year:1956 Mileage:0 Color: N/A /
 N/A
Location:

South Pittsburg, Tennessee, United States

South Pittsburg, Tennessee, United States
1956 Chevy Bel Air 2-Door Pro-Street PROJECT CAR, US $9,500.00, image 1
Transmission:N/A
Engine:N/A
Vehicle Title:Rebuilt, Rebuildable & Reconstructed
For Sale By:Private Seller
VIN: VC56 Year: 1956
Exterior Color: N/A
Make: Chevrolet
Interior Color: N/A
Model: Bel Air/150/210
Number of Cylinders: N/A
Trim: Bel Air
Warranty: Vehicle does NOT have an existing warranty
Drive Type: N/A
Mileage: 0
Condition: UsedA vehicle is considered used if it has been registered and issued a title. Used vehicles have had at least one previous owner. The condition of the exterior, interior and engine can vary depending on the vehicle's history. See the seller's listing for full details and description of any imperfections.Seller Notes:"No engineNo transmissionProject Car"

This is a 1956 Pro-Street Chevy Bel Air 2-Door PROJECT CAR!

The overall body is in sound condition; however the total car needs to be restored.  It has the original dash and steering column, the floors and trunk are solid, and the doors open and close well--no sag.  The front rims are polished center-line rims with skinny tires and the car has disc brakes in the front.  The tires and rims on the back are matched to the front rims, but not the right size for the car.  The correct back rims are not polished, and have 31X16.50X15 tires; however, they are dry rotted.  The paint is not great--very amateur.  It has a Ford 9 inch rear end with center carrier, but I am unsure of the gear ratio.

This vehicle steers and rolls, no transmission or engine.

I do have many misc parts to be sold with this car (see pictures).

The VIN tag is missing.  

THIS IS A PROJECT CAR!!

It will be sold "as is", and with BILL OF SALE ONLY--no title.

Call Pat with any questions (414) 704-7517

Auto Services in Tennessee

White Bluff Car Care Inc ★★★★★

Auto Repair & Service, Automobile Body Repairing & Painting, Brake Repair
Address: 4302 Highway 70 E, White-Bluff
Phone: (615) 797-9012

Veach`s Auto Repair ★★★★★

Auto Repair & Service
Address: 1116B Harpeth Industrial Ct, Bellevue
Phone: (615) 794-5008

Tune Up & Exhaust Shop ★★★★★

Auto Repair & Service, Automobile Parts & Supplies, Automotive Tune Up Service
Address: 5406 Main St, Spring-Hill
Phone: (931) 486-3557

Triple B Automotive ★★★★★

Auto Repair & Service
Address: 123 Parham Blvd, Estill-Springs
Phone: (931) 455-6268

TLC Automotive ★★★★★

Auto Repair & Service
Address: 242 E James Campbell Blvd, Lynnville
Phone: (931) 548-2154

Tennessee Clutch & Supply Inc ★★★★★

Auto Repair & Service, Automobile Parts & Supplies, Clutches
Address: 1995 Nolensville Pike, Bellevue
Phone: (615) 242-4163

Auto blog

Chevy Corvette gets Valet Mode with Performance Data Recorder [w/video]

Mon, 18 Aug 2014

For the 2015-model-year, Chevrolet introduces Valet Mode for the Corvette, an enhancement to the Performance Data Recorder (PDR) already available and to your peace of mind. The PDR already captures 720p HD video with a windshield-mounted camera, records interior audio with a cabin microphone and gathers telemetry data using GPS, saving the data to an SD card in the glovebox. You can then watch your track-day antics with various information overlays on the center console screen.
Valet Mode will let you hit 'Replay' when your car gets pulled up front smelling vaguely of fricasseed clutch. Turned on by entering a four-digit code, it also locks the interior storage spaces and turns off the infotainment system. It can't be turned off until the code is re-entered. There's a press release below with more information as well as a video that explains how it works, with the obligatory dig at the 'Vette's biggest foe.

Fewer than 1 in 3 Chevy dealers earn right to initially sell C7 Corvette

Mon, 01 Apr 2013

Looking to make the launch of the 2014 Corvette Stingray as efficient as possible, Chevrolet will be limiting the numbers of its dealers that can sell the all-new coupe and convertible. According to Automotive News, sales of the C7 Corvette will initially be limited to less than a third of Chevy's total dealership network when the 'Vette goes on sale this summer.
Only 900 dealers out of more than 3,000 locations nationwide will be allowed to sell the new Corvette at first, and the reason for this is so that there are no shortages at dealers that can actually get the cars sold. The article says that the 900 dealerships chosen represented 80 percent of total Corvette sales in 2012.
Some of the requirements dealers had to make to get initial allocation of Stingray sales include having sold at least four Corvettes in 2012 and having a Corvette Stingray specialist who will be required to have gone through a training session costing more than $2,000 per attendee. Once demand for the 2014 Corvette Stingray begins to subside - approximately six to nine months after it goes on sale - then allocation could open up to more dealers, but the report indicates this could happen following the 2014 model year.

Experimental mid-engine XP-819 Corvette going up for auction

Sun, 17 Feb 2013

It seems to be commonplace that when a new Corvette is in development, rumors swirl about a possible mid-engine layout. As is the case of Chevy's most recent C7 Corvette, these rumors never pan out.
In any case, the idea for a 'Vette with an engine mounted behind the driver can probably all be traced back to a single car, the 1964 XP-819 prototype. Built as an "engineering exercise" back in 1964, the prototype was designed with a rear-mounted engine. History tells us that the idea of a rear-engine Corvette fizzled, and the XP-819 was eventually cut up into pieces and stored at a shop in Daytona Beach, FL.
After sitting for untold years, a restoration project started on the car, and while it isn't yet fully completed, the current owner of the car, Mid America Motorworks, will have the car on display at the 2013 Amelia Island Concours d'Elegance as a "driveable chassis" with hopes of having a fully completed car ready to bring to next year's show.