Find or Sell Used Cars, Trucks, and SUVs in USA

Lots Of Goodies & A Lot Of $$ Invested 454 Big Block 700r Disc B. Redone Seats! on 2040-cars

US $8,500.00
Year:1957 Mileage:10
Location:

Kansas City, Missouri, United States

Kansas City, Missouri, United States

1957 CHEVY! REBUILT 454, NEW SEATS, FOUR WHEEL DISC BRAKES!

1957 CHEVROLET! STORED INDOORS AND WORKED ON OVER THE LAST TEN YEARS! TONS OF WORK ALREADY COMPLETED! LOW MILE 454, 700R TRANSMISSION, NEWLY UPHOLSTERED SEATS, FOUR WHEEL DISC BRAKES, RECHROMED BUMPER (mid section), BELAIR DASH, & MUCH MORE!

The custom 17" wheels within some of the photos, they are not included with this auction as they have been sold. The Chevy currently sits on a set of Pontiac wheels which you will see within some of the photos.

     This 1957 Chevy has spent the last decade tucked away in a garage. The previous owner would go through his spurts and spend as much as he could when it was available. He worked extra hours, borrowed, sold personal items, he did whatever he could to get his baby that much closer to being completed. This Chevy has had a tremendous amount of work done to it. It is very complete and comes with a whole lot of goodies. In my opinion, there is no better way to buy them than when they are at this point. Right after someone gets ambitious and spends all of the money on the vital aspects/big ticket items and then sells it off at a fraction of what they have in to it. So if you're looking for a steal, this is it.

Body: The external sheet metal on the Chevy is actually pretty solid. The rear sill, cowl, trunk lid, hood, roof, top sides of the fenders, top sides of the quarters, doors, everything is very solid. The rockers along with a couple of minor spots within the quarters and fenders are about the only spots that will require some attention. They are not terrible and I definitely would not go to the extent of replacing them. With a little sheet metal work, they would be good to go. The firewall in these Tri-Fives have to be modified in order to fit a big block which was done on this 57. So the mid section of the firewall still needs replaced. The floors as well as the trunk will also need replaced. The frame underneath the Chevy is solid. The previous owner was working to do away with the side moldings/trim but he got as far as sealing up the passenger side and that was it. With that, the side trim that I do have is about 75% complete. Unfortunately, I am lacking a few pieces. The remaining trim does come with the car. The bumpers are in relatively good shape. The previous owner sent off the mid sections of the front bumper and had them rechromed. Those pieces are still packaged up and are in excellent shape. The 454 that is within the Chevy was mounted up professionally as you will see within the photos located below. All of the glass (with the exception of the drivers side door and passenger side door glass) is in good shape. Located below, you will find additional photos of the Chevy. Some of which show it with a set of custom 17" wheels. I have since sold those wheels so this auction is for the 57 and the Pontiac wheels that it is currently sitting on which you can see located below.

Engine & Mechanical: The 454 that is within the Chevy was used in another vehicle before being taken out and set in this 57. I do have a four barrel carburetor that goes with the Chevy but unfortunately I did not have it on hand to take photos of it. The 700R transmission was also in excellent working order when it was pulled. The Chevy has front disc brakes and included with the sale, I will be giving a ten bolt posi rear end with a disc brake setup on it. This is out of an early 90's Z28 and has been measured to insure that it will fit.

Interior: The front buckets and back seat have both been refoamed and reupholstered. They were done professionally to the tune of about 2k dollars. The Chevy also has a Belair dash which is installed. The door panels within the Chevy are in decent shape.

     So here is that rare opportunity to own one of the most desirable Chevrolets that were ever manufactured. Much of the heavy work has been completed so someone is going to get a phenomenal deal while getting a huge head start. I can't see this Chevy taking more than thirty days to complete. I strongly encourage anyone who is interested to please call or email to schedule a time to come check it out. I would also like to add that I am usually on the phone from 7 AM until about 12 AM so you are always welcome to call and if I do not answer, just leave a message and I will return your call immediately. I know from my own experience with purchasing cars online, most of the time it is very difficult to get someone on the phone and to obtain the information you need. So I try to always stay on top of emails and phone calls. We do have a clear title for this 57.

Thanks,

Shawn

(816) 308-0351

Looking for a different project? I have several that are currently on eBay, which you are welcome to view by clicking here.

 

 

Auto Services in Missouri

Warehouse Tire & Muffler ★★★★★

Auto Repair & Service, Automobile Parts & Supplies, Tire Dealers
Address: 1201 E Broadway Blvd, Ionia
Phone: (660) 826-1657

Uptown Auto Sales ★★★★★

New Car Dealers, Used Car Dealers, Wholesale Used Car Dealers
Address: 302 W Spencer St, Cuba
Phone: (573) 885-4988

Toyota Of West Plains ★★★★★

Auto Repair & Service, New Car Dealers, Used Car Dealers
Address: 1035 Porter Wagoner Blvd, Eunice
Phone: (417) 256-1212

T & B Auto ★★★★★

Auto Repair & Service
Address: 2105 W Division St, Willard
Phone: (417) 873-9858

Springfield Freightliner Sales ★★★★★

New Car Dealers, Used Car Dealers, New Truck Dealers
Address: 3020 E Division St, Willard
Phone: (417) 862-5050

Spectrum Glass Inc ★★★★★

Automobile Parts & Supplies, Glass-Auto, Plate, Window, Etc, Windows
Address: 955 W Terra Ln, Saint-Paul
Phone: (636) 614-0267

Auto blog

2014 Chevrolet Silverado tows in new configurator, microsite

Mon, 21 Jan 2013

Judging by your continued enthusiastic response to configurator notices, dear reader, you enjoy speccing out new cars as much as we do. Better still, there tends to be even more ways to personalize, configure and bloat theoretical MSRPs on full-size trucks as there are with more ordinary passenger cars. In addition to trim level, engine and transmission choices, truck buyers usually have to specify items like cab configuration, bed length, number of driven axles, tow packages, gear ratios and all sorts of bits and bobs.
That's why we're pleased to see the DIY specification utility for the 2014 Chevrolet Silverado come alive so soon after this week's Detroit Auto Show debut. While the configurator lacks pricing (General Motors hasn't announced numbers yet) and full options, you can still spec out your half-ton rig, and even print it out or email it to your friends. Beyond the configurator, the new model-specific site is pretty cool, too, with various videos and closer looks at the truck's new features.
The new Chevrolet pickup range won't be on dealer lots until sometime this summer, so whether you're a building contractor, an avid sportsman or just a guy or gal that loves full-size trucks, you might want to check out the link below to keep your appetite whetted. If you're more of a Sierra fan, well, it looks like you're going to have to wait a while - GMC hasn't updated its site yet.

Watch how Corvette Racing's new collision-avoidance radar system works

Fri, 22 Mar 2013

When it comes to technology used in racecars, we generally expect it to trickle down to production cars, not the other way around. Well, Pratt & Miller has developed a new rear-facing radar that operates in a similar fashion to what we're used to in modern blind spot detection systems, only it is also capable of tracking cars as they approach and relaying vital information to the driver via a large display screen.
The innovative radar system debuted at last weekend's 12 Hours of Sebring for Corvette Racing, and this system makes perfect sense for endurance races like this since the cars sometimes have to drive through the night and in poor weather conditions.
The radar can detect cars even with poor visibility, and uses easy-to-distinguish symbols for the driver to identify.

2014 Chevrolet Corvette Stingray Convertible gives us a couple of looks

Sat, 02 Mar 2013

Put away your pixel paintbrushes, kids. Pack up your Photoshop. This is the real-deal 2014 Chevrolet Corvette Stingray Convertible in its first official images. The droptop Chevrolet will roll into the bright lights of the Palexpo exhibition at next week's Geneva Motor Show, a four-wheeled statement of intent that General Motors is serious about taking its Corvette franchise global.
Chevy isn't providing anything in the way of further details with these two shots, but we've learned at least a couple of things about the car shown here. First off, the example seen in these images is fitted with the optional Z51 Performance Package - something that isn't immediately evident because there's no sign of the coupe model's prominent ductwork on its rear haunches. In order to accommodate the power folding hard tonneau cover, the vents that feed the transmission and differential coolers have been relocated to the underside of the car. The dark paint color on this example also does a good job of muting the contrasting black front fender vents and hood opening - Z51-spec design details that have proven to be somewhat controversial.
One other thing to note: These two shots also display the Stingray wearing different alloy wheels than the split five-spoke design shown at the hardtop's Detroit Auto Show unveiling in January. The simpler, thin five-spoke wheels should do a good job of showing off the Z51's upgraded brakes, and they'll be optional on the coupe as well.