1968 Chevy C-10 Stepside Short Box on 2040-cars
Blackhawk, South Dakota, United States
Body Type:Pickup Truck
Engine:350
Vehicle Title:Clear
Fuel Type:Gasoline
For Sale By:Private Seller
Number of Cylinders: 8
Make: Chevrolet
Model: C-10
Trim: Stepside
Cab Type (For Trucks Only): Regular Cab
Warranty: Vehicle does NOT have an existing warranty
Drive Type: 2wd Automatic
Mileage: 56,000
Power Options: Power Steering/Power Brakes
Exterior Color: Orange
Interior Color: Orange/Black
Up for auction is my 1968 Chevrolet C-10 stepside short bed. This truck was correctly restored at one time. I would guess 20 years ago. At some point it had some of the body parts repainted. Although the paint color matches it has some orange peel and a little duller. There is some body filler on some panels, I don't know why but there isn't any rust behind it. I bought this truck the way you see it here, concentrated on the mechanical not the appearance and drove the heck out of it. With that said here is a detailed description.
Body:
The body is in great shape overall but does have some body filler. I don't know if it's from the original restoration or more recent. At some point the front clip was removed and when it was reinstalled not a lot of care was given to panel alignment. So some of the gaps are off. When the partial repaint was done they didn't wet sand or buff it out so there is orange peel next to smooth and glossy paint. There are stone chips and paint pealing off here and there also. The only rust is typical for these trucks, below the battery tray on the inner fender and the forward cab supports as seen in pic. I have new-in-box cab supports that will go with this truck. That is the only rust anywhere on this truck! The rockers may have been replaced. There is a row of rivets inside the cab along the top of the rockers and I'm not sure why. They are welded everywhere else.
The windshield is cracked with a few large stone chips. It is all on the passenger side on not in line of sight.
The box is in great shape overall. The wood is weathered but not rotted out. Since the original gas tank leaked I removed it and installed a RCI aluminum fuel cell in the bed.
Interior:
The seat is in great shape having been recovered at some point. The dash radio hole has been enlarged at some point even though there is no radio installed. All the switches work like they should but the heater only blows on high. When I bought the truck therre was a hand fabbed gauge cluster panel which I though looked tacky so I replaced it with the carbon fiber look one in the pics. Speedo and tach are Autometer and the rest of the gauges are Shark. It did have Shark speedo and tach when I bought it but the speedo was wildly inaccurate. That is the reason for the change. I do have the original gauge cluster that will be included. The original odometer shows 54xxx miles. The Shark speedo shows 17xx miles and the current speedo shows just over 400 miles.
There is currently no carpet, sill guards or kick panels intalled. I have all new rubber floor cover, sill plates and kick panels that will be included.
Powertrain:
The engine is a Chev 350, runs great and doesn't burn oil. It does however have the typical two piece rear main seal leak, it's not bad but does leak. The original stamped steel valve covers leaked badly. I replaced them with some fabricated aluminum and good gaskets which helped. The drivers side valve cover still seeps a little. The motor has a Weiand dual plane manifold with a Holley Street Avenger carb and HEI distributor. Also, headers and dual exhaust.
The transmission is a TH350 and was just installed before I bought the truck. It shifts fast and firm.
I also installed a 4 core all welded aluminum radiator along with a large 1 ton external trans cooler. It does not overheat no matter how hot it is outside!
Rearend is the truck 12 bolt with open differential. The drivetrain is bullet proof!
Electrical:
Lights, turnsignals, windshield wipers and heater all work. Wiring has much to be desired. It is safe and operable but honestly looks like crap.
Suspension and brakes:
When I got the truck the original springs where heated and allowed to sag to lower it. I removed all the original suspension and replaced with 2 inch drop spindles and 2 inch drop springs for a total of 4 inches in the front. Also converted the front brakes to disc with drilled and slotted rotors. It stops better than any new car or truck!!! The rear springs were replaced with 5 inch drop springs. Also replaced track bar bushings and ball joints.
Overall this is a nice driver. It runs great, has plenty of power and get looks no matter where you take it. I would drive it anywhere. The reason I'm selling is I need the space and I really don't drive this truck as much as it deserves to be driven.
There is no warranty implied or otherwise, what you see is what you get! I will required a $500 non-refundable deposit at the close of the auction. If you're serious about owning this truck you won't have any problem with that.
Chevrolet C-10 for Sale
1967 chevy truck, c-10 swb side-step
1968 c10 pickup
1979 chevrolet c/10 truck in california
1978 chevy shortbed stepside c10
66 gmc chevy c10 short bed
Very clean 70 c10, 350ci w/ auto trans, power steering and brakes, a/c, 20 inchAuto Services in South Dakota
Tint Masters ★★★★★
Dales A-1 Transmission Service ★★★★★
Advance Auto Parts Sioux Falls ★★★★★
Bob`s Lock & Key ★★★★
Tony`s Collision Center ★★★★
Hedahls Parts Plus ★★★★
Auto blog
Consumer Reports criticizes small turbo engines for misleading performance, fuel economy claims [w/video]
Tue, 05 Feb 2013Consumer Reports has taken aim at at small-displacement, forced-induction engines, saying the powerplants don't manage to deliver on automaker fuel economy claims. Manufacturers have long held that smaller, turbocharged engines pack all power of their larger displacement cousins with significantly better fuel economy, but the research organization says that despite scoring high EPA economy numbers, the engines are no better than conventional drivetrains in both categories. Jake Fisher, director of automotive testing for Consumer Reports, says the forced induction options "are often slower and less fuel efficient than larger four and six-cylinder engines."
Specifically, CR calls out the new Ford Fusion equipped with the automaker's Ecoboost 1.6-liter four-cylinder engine. The institute's researchers found the engine, which is a $795 option over the base 2.5-liter four-cylinder, fails to match competitors in acceleration and served up 25 miles per gallon in testing, putting the sedan dead last among other midsize options.
The Chevrolet Cruze, Hyundai Sonata Turbo and Ford Escape 2.0T all got dinged for the same troubles, though Consumer Reports has found the turbo 2.0-liter four-cylinder in the BMW 328i does deliver on its promises. You can check out the full press release below. You can also read the full study on the Consumer Reports site, or scroll down for a short video recap.
NHTSA could add 1M cars to GM recall
Wed, 13 Mar 2013
The Detroit Free Press is reporting that the National Highway Traffic Safety Administration may expand a recall campaign for faulty brake lamps. The agency is currently looking into complaints that certain 2004-2011 Chevrolet Malibu models as well as some 2007-2009 Saturn Aura sedans may have brake lights that do not illuminate when the driver presses the pedal. Alternatively, the lamps may also illuminate without input from the driver. General Motors recalled 8,000 Pontiac G6 models from the 2005 model year for the same problem, and NHTSA is currently investigating whether to add 550,000 more G6 models built between 2005 and 2009 to the list for the same issue.
In addition, investigators are currently examining 97 complaints from Malibu and Aura owners with the same trouble. If NHTSA adds those models to the recall campaign, more than one million units could be covered. GM, meanwhile, says there have been no accidents or injuries as a result of the problem.
GM profits threatened by glut of pickups
Wed, 05 Dec 2012Automotive News reports that General Motors may slash production or ramp up discounts in order to deal with an oversupply of pickup trucks. GM currently has more than double the standard supply of pickups, and the vehicles are threatening to dampen the automaker's profits for 2013. Typically, automakers try to sustain a 60- to 75-day supply of vehicles, but GM is currently loaded with a 139-day supply, as of last month. At the end of November, the automaker was sitting on 245,853 units.
The manufacturer says that it will adjust production accordingly before laying any incentives on the profitable pickups. Even so, there's some concern that the inventory swell could hurt the roll-out of the next-generation Chevrolet Silverado and GMC Sierra. GM actually began slowly stepping back production in August, but it's clear the company will take further action as it heads toward the end of the year and into the next. Analysts predict the automaker could reduce pickup manufacturing by nearly half in the first quarter of 2013.
That still may not be enough to keep GM from laying extra cash on the Silverado and GMC Sierra. While the company's incentive spending was down in November compared to the same month in 2011, both the Ram 1500 and Ford F-150 saw double-digit percentage increases in sales last month while the Silverado and Sierra numbers slid compared to a year prior. Incentive spending could help move more trucks and add some balance to the GM inventory surge.