1970 Chevy Truck on 2040-cars
Bay City, Oregon, United States
Body Type:Pickup Truck
Engine:350
Vehicle Title:Clear
Fuel Type:Gasoline
For Sale By:Private Seller
Number of Cylinders: 8
Make: Chevrolet
Model: C-10
Trim: c20
Cab Type (For Trucks Only): Regular Cab
Warranty: Vehicle does NOT have an existing warranty
Drive Type: 2wd
Mileage: 113,000
Options: CD Player
Exterior Color: Blue
Interior Color: Beige
1970 Chevy third owner truck i bought this truck from the original owners grandson. It has a 350 motor 350 trans power steering power brakes, new brakes and wheel cylinders on all four corners, new master cylinder. Brake job was done about a year ago. Has a Edelbrock intake and carb. Msd distributor. I still have the original carb intake and distibutor it goes with the truck. New radiator and water pump about 6 months ago. New exhaust headers and all about a year and a half ago still have the original manifolds they go with the truck as well. Truck has 113000 original miles on it. The body is solid only rust in the body is in the right cab corner the right inner fender ans core support under the battery are rusted as well.
Chevrolet C-10 for Sale
Auto Services in Oregon
Wayne`s Garage ★★★★★
Valley View Auto Repair ★★★★★
Valley Lock and Key ★★★★★
Used Cars in Portland ★★★★★
Silverline Automotive ★★★★★
Shelton Auto Parts ★★★★★
Auto blog
2014 Chevrolet Silverado and GMC Sierra debut all-new designs, three new engines
Thu, 13 Dec 2012General Motors has finally dropped the curtain on the 2014 Chevrolet Silverado and 2014 GMC Sierra. Both trucks have undergone substantial revisions with updated versions of the company's 4.3-liter V6, 5.3-liter V8 and 6.2-liter V8 engines. In a shot across the bows of both Ford and Chrysler, GM says it won't use a V6 engine adapted from passenger car applications. Instead, it developed the 4.3-liter engine based on its proven truck-duty architecture.
All three mills will boast direct injection fuel systems as well as a new cylinder head design. Combined with a revised piston, the new engines feature a smaller combustion chamber with a compression ratio of 11:1 or higher depending on the application. Cylinder deactivation and continuously variable valve timing are all part of the recipe, and each engine is paired with a six-speed automatic transmission with auto grade breaking. So far, no fuel economy or horsepower figures have been released, though GM says the new engines will best their predecessors in both areas.
Outside, the trucks feature a number of enhancements to reduce drag and wind noise, and GM claims both the Silverado and Sierra will offer buyers some of the quietest cabins in the class. Extended cab models now feature front-hinged rear doors to allow easier access to the back passenger area, and Crew Cab buyers can now select between a five-foot, eight-inch bed or a six-foot, six-inch bed. Buyers with a mind toward going off road will also rejoice in the return of the Z71 package, complete with Rancho shocks, front tow hooks and additional under-body protection.
First privately owned Corvette Stingray blitzes 1/4 mile in 12.23 at 114.88 mph
Tue, 01 Oct 2013Chevrolet's latest road rocket, the Corvette Stingray, is a very quick car. If one needs further proof of that, we recommend they take a look at this video from Hennessey of what is claimed to be the first privately owned C7 Corvette to make a pass down the quarter mile. Not just any quarter mile, mind, this black C7 blitzed its way down the tuner's primary testing dragstrip. The Chevrolet ran the quarter in just 12.23 seconds at 114.88 miles per hour. That is a very quick time for a stock car.
Equipped with the Z51 package and a six-speed automatic transmission, not only does the C7 run a solid time, but it does so with little to no drama. That won't last though, as Hennessey will likely return it to its owner with far more power - we just hope they show a drag run of the completed product. Take a look below to watch the C7's 12.23-second run on video.
Experimental mid-engine XP-819 Corvette going up for auction
Sun, 17 Feb 2013It seems to be commonplace that when a new Corvette is in development, rumors swirl about a possible mid-engine layout. As is the case of Chevy's most recent C7 Corvette, these rumors never pan out.
In any case, the idea for a 'Vette with an engine mounted behind the driver can probably all be traced back to a single car, the 1964 XP-819 prototype. Built as an "engineering exercise" back in 1964, the prototype was designed with a rear-mounted engine. History tells us that the idea of a rear-engine Corvette fizzled, and the XP-819 was eventually cut up into pieces and stored at a shop in Daytona Beach, FL.
After sitting for untold years, a restoration project started on the car, and while it isn't yet fully completed, the current owner of the car, Mid America Motorworks, will have the car on display at the 2013 Amelia Island Concours d'Elegance as a "driveable chassis" with hopes of having a fully completed car ready to bring to next year's show.