1969 Camaro With Many New Parts To Restore on 2040-cars
Laconia, New Hampshire, United States
Body Type:Coupe
Vehicle Title:Rebuilt, Rebuildable & Reconstructed
Engine:307 V8
Fuel Type:Gasoline
For Sale By:OWNER
Number of Cylinders: 8
Make: Chevrolet
Model: Camaro
Trim: hard top
Drive Type: 3 SPEED MANUAL TRANSMISSION
Mileage: 54,480
Number of Doors: 2
Exterior Color: Blue
Warranty: Vehicle does NOT have an existing warranty
Interior Color: DARK BLUE
I have a 1969 camaro for sale needs a total restoration. Not for beginners.
Has matching number 307 v8, orignal 3 speed manuel transmission, car is
complete it is all there but needs lots of work. Here is a list of new stuff that comes with car.
2 full rear 1/4 panels
full floor pan not sections complete floor side to side front to back
full trunk floor pan
2 trunk floor extensions
pass side outer rocker panel
both side inner rocker panels
both rear inner wheel housings
rear tail light panel
seats are in nice shape except for rip in pass side front seat, all interior peices are there some will need replacing.
frame rails are rotted towards front of car as you can see by the holes in the rear floor yes this car needs a lot of work
but will be a nice orignal car when completed and with all the panels you are half way there, did have engine running
but carb was leaking comes with rebuild kit and new fuel pump also. thanks for looking and good luck.
pick up only unless in new england area can deliver for a price. Thanks
On May-04-13 at 19:23:30 PDT, seller added the following information:
NH is a non title state before 1997 will come with a bill of sale and all nh paper work in order for you to
get a title for your state sold as is as shown. thanks
Chevrolet Camaro for Sale
Auto Services in New Hampshire
Whitney Motor Werkes ★★★★★
Turnpike Services Inc ★★★★★
Precision Towing & Recovery ★★★★★
Portsmouth Used Car Superstore ★★★★★
NTB National Tire & Battery ★★★★★
New Image Auto Repair ★★★★★
Auto blog
Experimental mid-engine XP-819 Corvette going up for auction
Sun, 17 Feb 2013It seems to be commonplace that when a new Corvette is in development, rumors swirl about a possible mid-engine layout. As is the case of Chevy's most recent C7 Corvette, these rumors never pan out.
In any case, the idea for a 'Vette with an engine mounted behind the driver can probably all be traced back to a single car, the 1964 XP-819 prototype. Built as an "engineering exercise" back in 1964, the prototype was designed with a rear-mounted engine. History tells us that the idea of a rear-engine Corvette fizzled, and the XP-819 was eventually cut up into pieces and stored at a shop in Daytona Beach, FL.
After sitting for untold years, a restoration project started on the car, and while it isn't yet fully completed, the current owner of the car, Mid America Motorworks, will have the car on display at the 2013 Amelia Island Concours d'Elegance as a "driveable chassis" with hopes of having a fully completed car ready to bring to next year's show.
C7 Corvette turbo with 1,000 horsepower promised from Hennessey
Mon, 25 Feb 2013If you can't wait for the next-generation Chevrolet Corvette ZR1, Hennessey says they will have you covered. The Texas-based company has announced it will offer a spate of upgrades for the 2014 Corvette ranging from a range of bolt-on options all the way up to a 1,000-horsepower, twin-turbo system. Buyers can start with a cold air intake, cat-back exhaust or stainless steel long-tube headers, but Hennessey says it will also offer up three stages of forced induction mayhem should those bits and baubles not provide enough thrust.
Those choices start with a supercharger system good for up to 700 hp, though Hennessey will gladly ditch the blower in favor of two turbos. Doing so will spin the crank to the tune of 800 horsepower all the way up to a certifiably ludicrous 1,000 ponies. There's no word on how much these tricks will cost you - or when they will be available, as we're guessing they haven't gotten their hands on the car yet - but you can head over to the Hennessey site to drop them a line if you're curious.
Chevy might've pulled out of NASCAR if it weren't for new Gen 6 car
Wed, 20 Feb 2013We've been on the fence with NASCAR for some time now. On one hand, it's some of the closest racing anywhere in motorsports, with actual passing and door-handle-to-door-handle action as a matter of course. But on the other, it's become template racing - a personality-driven sport more about the drivers than any sort of loyalty to a particular automaker. The Car Of Tomorrow format really rammed that message home, with a racecar's identity coming down to little more than headlamp stickers slapped on the nose. That's not necessarily a bad thing in and of itself, but we've wondered for some time what's in it for the automakers, who pay big money to stay in a series that has had little increasingly little do with street car sales, let alone innovation.
Apparently General Motors was beginning to wonder the same thing. In a new ESPN report, Rick Hendrick, team owner of Hendrick Motorsports, suggests that GM would have seriously considered leaving NASCAR if it wasn't for the move away from the COT to the new Gen 6 racer. According to Hendrick, GM North America boss Mark Reuss spearheaded the charge away from the 2007 COT and toward a racecar with clearer automaker ties - cars like the new Chevrolet SS racer shown above. Learn more about the fight for a closer-to-production look in the ESPN story at the link.
Now, if we could just get more rear-wheel drive V8 coupes into showrooms....