Find or Sell Used Cars, Trucks, and SUVs in USA

850 Hp C5r Naturally Aspirated 427 Race Engine on 2040-cars

Year:2000 Mileage:0
Location:

Cumming, Georgia, United States

Cumming, Georgia, United States
Vehicle Title:Clear
Engine:GM C5R 427
VIN: 2G1FP22G0x2138165 Year: 2000
Drive Type: Auto
Make: Chevrolet
Mileage: 0
Model: Camaro
Warranty: No
Trim: None
Country of Manufacture: United States
Condition: Used: A vehicle is considered used if it has been registered and issued a title. Used vehicles have had at least one previous owner. The condition of the exterior, interior and engine can vary depending on the vehicle's history. See the seller's listing for full details and description of any imperfections. ... 

 You are looking at one of the quickest/fastest LSX All Motor Combinations built to date.

Auction Includes:

GM C5R Race Block
Fully Machined by Proline Race Engines of Woodstock Ga
Set up & Machined for Jesel Belt Drive/Dry Sump Oiling
Bronze Lifter Bushings
Machined Deck Surface
Bore & Hone with Torque Plate
Chamfer bottom of cylinders/Debur Block/Notch front cam housing bore for oil/ream lifter bores
ARP Main Studs/Head Studs/Waterpump Studs
4.125 Bore

GM C5R Cylinder Heads
RARE
0090 Castings
Fully Assembled
28cc Combustion Chambers
Manley Nextek Triple Springs 965lbs @.800
2.250 Intake Valves/1.600 Exhaust Valves
Fully Hand Ported by Larry Meaux  Racing Heads
400+CFM by .950 lift

Diamond Pistons
4.125 Bore
1.118 Compression Height
-18cc Dome
.927 x 2.200 x .150 Pins
Total Seal Moly Low Tension Rings

BME Aluminum Connecting Rods

BME 265 Series
6.115 Length
.900 Small End

Custom Sold Roller Camshaft
Specs to be provided to purchaser
28x/30x .8xx/.8xx

Jesel Lifters
TS Series
Part # LFD-53653
Solid body .937 Diameter
.850 Roller

Jesel Shaft Mount Adjustable Rocker Arm System
1.85 Ratio

Trend Pushrods
Intake- 9.425 x .165 Wall
Exhaust- 9.400 x .165 Wall

GMPP Valve Covers
GM Part # 12480025
Internal Oil Squirters
FMS 427 C5R Engraved
Modified for Vacuum Pump
Adequate material to machine surface/add personalized logo

Stainless Tri Y Longtube Headers
Custom Built 2" Tri Y Stainless Longtube Headers with HVMC
Will fit 4th Generation F Body with Tubular K Frame

Beck Mechanical Sheet Metal Intake Manifold

Your Choice of manifold:
Tapered Plenum/Front Mount TB/6" Runner
13 1/4" total height from top of valley cover to top of intake manifold at highest point
Includes Billet Rails

or

5" Runner with three available plenums/tops
Single 4150 Flange Top Mount
Dual 4150 Top Mount with Accufabs/Linkage in place
5" Tall Front Mount TB Plenum
13" Tall from Valley cover to tallest point of intake

I will sell both intakes with all plenum options for an additional cost. This auction includes your CHOICE of intake manifolds as listed above.

Custom Motor Plate
Fits 4th Generation F Body
Clears Dry Sump Oil Pump

Items needed to complete engine assembly
Please note this engine is NOT CURRENTLY ASSEMBLED. Pictures were taken 11/27/2012 and are an extremely accurate representation of the engines condition. I will be happy to take any pictures of any requested parts etc. I will consider parting out IF I have enough interest in several of the items.
This engine was disassembled to allow the owner to use several items on his new combination. There was NOTHING wrong with the engine at the time it was removed.
Crankshaft- Previously had Callies Dragonslayer 4.00" crankshaft
Main & Rod Bearings
Head Gaskets/All Gaskets & Seals
Belt Drive
Oiling System


There are less than 50 passes on the connecting rods/valvetrain. This engine (properly assembled) has proven to be 100% reliable for an entire season without so much as replacing a valve spring or spark plug!!

This combination has been powered Bobby Lashleys All Motor 4th Generation Camaro to 8.29@163mph ETs weighing 3150lbs

To see video of this engine in action please go to YouTube and "search" Bobby Lashley Camaro


  Build Sheet/Cam Card/Cylinder Head Flow Data/Dyno Sheets will be provided to buyer. Feel free to call 678 513 7105 with any questions/concerns prior to bidding/purchasing.


Auto Services in Georgia

Woodstock Quality Paint and Body ★★★★★

Auto Repair & Service, Automobile Body Repairing & Painting, Automobile Parts & Supplies
Address: 9285 Main St, Holly-Springs
Phone: (770) 926-3898

Volvo-Vol-Repairs ★★★★★

Auto Repair & Service, Automobile Body Repairing & Painting, Towing
Address: 3080 Briarcliff Rd NE, Conley
Phone: (404) 636-0348

Village Garage And Custom ★★★★★

Auto Repair & Service
Address: 1215 Glenwood Ave SE, Sandy-Springs
Phone: (888) 420-1846

Tim`s Auto Upholstery ★★★★★

Automobile Parts & Supplies, Automobile Seat Covers, Tops & Upholstery, Upholsterers
Address: 2402 Franklin Blvd, Oakwood
Phone: (770) 532-6243

Tilden Car Care Abs ★★★★★

Auto Repair & Service
Address: 7120 McGinnis Ferry Rd, Suwanee
Phone: (770) 476-7072

TDS Auto Service ★★★★★

Auto Repair & Service, Brake Repair, Gas Stations
Address: 1327 N Cherokee Rd, Mansfield
Phone: (770) 464-9988

Auto blog

GM already raising prices on 2014 Silverado and Sierra pickups

Mon, 14 Oct 2013

General Motors must be pretty pleased with sales of its two newest pickups, the GMC Sierra and Chevrolet Silverado, as it's announced price hikes for both models, as part of a planned price tweak.
Prices will be bumped by as much as $1,500, although weirdly, they'll be offset by as much as $1,500 in cash-back offers through the end of October. Fox Business reports that GM spokesman Jim Cain said of the price hike, "With the sell down of the '13 models nearly complete, this price adjustment was planned and is a normal part of business."
The move, as Fox is quick to point out, is an interesting one, as sales of the twin pickups struggled last month relative to the Ford F-Series, while both of GM's crosstown competitors have been aggressively undercutting Silverado and Sierra prices. The F-150 starts at $24,070 and the Ram 1500 comes in at $23,600, not counting any cash on the hood. A base Silverado, meanwhile, retails at $25,575.

GM won't sell 2014 Chevrolet SS in Canada

Thu, 21 Feb 2013

Allow us to be the first to extend our condolences to our friends to the north. General Motors has announced the 2014 Chevrolet SS will not be available in Canada. The Globe and Mail reports the automaker has confirmed the high-performance sedan won't hit Canadian dealers, though GM hasn't offered up any reasoning as to why that is.
Buyers here in the US of A, meanwhile, can look forward to getting their hands on the 415-horspower, rear-wheel drive SS by late summer. Something tells us it won't be long after that before Canadian officials start seeing individually imported 6.2-liter V8 four-doors in their neighborhoods. Fortunately, Canadian buyers will still be able to take home the 2014 Chevrolet Corvette. The C7 bowed at the Canadian International Auto Show last week, reportedly drawing sizable crowds and interest.

Final C6 Corvette built in Bowling Green

Fri, 01 Mar 2013

With all of the attention given to the 2014 Chevrolet Corvette Stingray lately, you could be forgiven for thinking that it's already well along in production, yet tooling up for the new C7 has only just begun. In fact, production of the outgoing C6 generation in Bowling Green, Kentucky just halted on Thursday.
As the C6 has aged, production numbers have predictably ebbed along with demand, but this year, the addition of the 427 and 60th anniversary models resulted in an uptick in vehicles built - this, despite a model year shortened by around 25 percent to accomodate the new model changeover. The final C6 Corvette ever, No. 13,466 built this year, was a white 427 Convertible destined for the General Motors Heritage Center museum. The car's 7.0-liter V8 heart was assembled by Corvette chief engineer Tadge Juechter himself.
In total, Bowling Green pushed out 215,100 C6 Corvettes over nine years. If you're still a C6 fan at heart and are hoping to get a good deal on a phase-out model, step lively - Chevrolet reportedly had about 6,100 unsold units, which Autoweek suggests is good for around five and a half months of supply at the model's current sales rates. Given that demand will likely slacken even further as the C7 draws closer, that should be a big enough stockpile to keep dealers satisfied until 2014 Stingrays begin showing up on their forecourts in December.