1964 Chevrolet Chevelle Ss 5.3l on 2040-cars

Auto blog

More Corvette Stingray Factoids: Vanishing panel gaps and 26-mpg LT1

During January's Detroit Auto Show, we managed a longer than expected wandering tag-team interview with C7 Corvette chief engineering exec Tadge Juechter (pictured above), and LT1 engine boss Jordan Lee (pictured below). They are, quite honestly, two of the very nicest bigshot lads to ever walk the engineering corridors of an American manufacturer. Both are enthralled by what they're doing for a day job. So are we.
We've followed the pre-sale anticipation for the Chevrolet C7 Corvette Stingray like an Oreck vacuum yanking every speck of dirt from a well-trampled carpet. Everything is reportable and contains a grain of further knowledge about this dramatically important and cheered-for car, as it continues to be pressured into representing all that is superior about the American dream. The Corvette wears one heavy cloak.
So, most of what was talked about has been expertly reported already right here on Autoblog. But, looking through our notes again, both Jeuchter and Lee added facts to the buzzing mix.

2014 Chevy Cruze Diesel arrives with 42 mpg for $25,695*

The last time General Motors had a diesel passenger car in the US, it was the 1.8-liter 1986 Chevette. At the 2013 Chicago Auto Show today, GM is unveiling the much-anticipated 2014 Chevrolet Cruze Diesel. The compact bows with a 2.0-liter turbo-diesel four-cylinder engine that boasts 148 horsepower and 258 pound-feet of torque, with full twist coming on at just 2,000 rpm. What's more, the common-rail, direct-injection diesel features an overboost function that allows the engine to deliver up to 280 lb-ft of torque for 10 seconds at a time. Even with 10 more horsepower and 110 more pound-feet of torque than the available turbocharged 1.4-liter four-cylinder in the Cruze, the 2.0-liter diesel engine can return up to 42 mpg (highway) bolted to its six-speed automatic transmission.
If you're counting, that figure meets the less powerful Cruze Eco with a six-speed manual transmission. More importantly, the auto transmission Cruze Diesel matches its main competition, the Volkswagen Jetta TDI, in highway fuel economy. The Cruze 2.0 TD (as it will be badged) can also handle up to 20 percent biodiesel (B20), whereas the Jetta is rated only for B5. General Motors has not released city fuel economy for its newest diesel, but we do know how much it will cost you to jump behind the driver's seat.
GM will kindly ask for $25,695, plus an $810 destination fee. That marks a $2,115 premium over a loaded Cruze LTZ Auto and $2,640 more than the Jetta TDI, though the MSRP will net you a leather interior, 17-inch alloy wheels and an Aero Performance Package, as well as a two-year maintenance plan and five-year, 100,000-mile powertrain warranty. Compared to the gas-powered Cruze, you also lose a couple cubic feet of rear cargo space thanks to a 17-liter diesel emission fluid tank. That urea fluid, which helps put the clean in clean diesel, will need to be refilled at least every 10,000 miles.

GM recalls 8,500 Chevrolet Malibu models for rear suspension glitch

According to a letter from General Motors to the National Highway Traffic Safety Administration, flaws in the build process of the 2013 Chevrolet Malibu have led to the recall of 8,519 cars. Units built between December 6, 2011 and January 15, 2013 may have been assembled with rear suspension cradles that had insufficient torque applied to certain bolts. That out-of-spec assembly could lead to issues ranging from slight noises to a loss of vehicle control.
The problem was first noticed in December of last year by a GM test fleet driver and eventually tracked back to the improperly torqued bolts on the suspension cradle assembled through July 2012 by a supplier located not too far from the Malibu's Detroit/Hamtramck Assembly Plant. Since an official NHTSA recall notice has not been issued yet, it isn't clear whether or not Detroit-built Malibus were the only ones affected (the 2013 Malibu is also built at GM's Fairfax Assembly Plant in Kansas City, Kansas). Dealers will fix the problem by inspecting vehicles for proper torque specs, retightening if not within specs and, in some cases, perform a rear-wheel alignment.