Find or Sell Used Cars, Trucks, and SUVs in USA

68 Chevelle Factory Ss 4 Speed Easy Diy Project Ready For Your Color Motor Trans on 2040-cars

US $9,000.00
Year:1968 Mileage:100000
Location:

Kalama, Washington, United States

Kalama, Washington, United States
Vehicle Title:Clear
Engine:396 v8
VIN: 138 Year: 1968
Drive Type: 4 speed
Make: Chevrolet
Mileage: 100,000
Model: Chevelle
Sub Model: super sport
Trim: black
Condition: Used: A vehicle is considered used if it has been registered and issued a title. Used vehicles have had at least one previous owner. The condition of the exterior, interior and engine can vary depending on the vehicle's history. See the seller's listing for full details and description of any imperfections. ... 

have copious amounts of money in this car. purchased through some people in my home town that own the local towing/wrecking company. had been in one of his out buildings forever along with a 68 malibu that looked as though it got ass-ended by a log truck. the malibu had buick interior verified by cowl tag and build sheet. this was a strike year and these cars could of had anything gm in them. took the front clip, nice doors, mint buckets, and tilting/telescoping column from that car along with a few other parts. the super sport drive train had gone into one of his race cars years ago. guy I went to high school with in the 70's drove it every day. knew it was the same car by custom paint that had a graphic on the quarters. 

I had a 69 427 and super t10 that was destined for the car, but has since gone into a 69 vette I purchased from a friend. original teal blue/teal blue 396 4 speed ac car with split back front bench. the guy that did all the work has mad skills and converted the firewall to accept a standard heater box. floors and trunk had plenty of pin holes. bottom of quarters and wheel well lips were rusted. after the trunk was cut out some rust was found in the bottom of the tail panel so it was replaced also. everything but the frame was either media blasted or stripped with a large brush on a big grinder. no rattle can anything anywhere on this car. high solid epoxy went on top of bare metal, then body work, then a regular epoxy primer. still have a gallon of $100 sealer primer that comes with car. brought it back just short of paint when I knew it would be sold. my plan was black base/clear. the dash, rear package area and window frame already painted black single stage urethane. engine compartment, interior, trunk shot with a satin black enamel. high grade paintable undercoating that dries like bedliner went on trunk, floors, underside of trunk and drop offs. splatter paint went on top of that in the trunk. the metal work was awesome. the quarter skins were fully welded as was the trunk and floors. zero warping as the guy takes the time to weld cool weld cool. very little filler besides the quarter skin seams. urethane seam sealer on all trunk and floor seams. all door hinges rebuilt, heater box all gone through with new heater core, new dash pad, rear seat all new. the front buckets are still the buick style upholstery, but mint. planned on using them for a few years before buying the chevelle stuff. all the loose pieces were media blasted and put in satin black enamel(bumper brackets, ect.) new front and rear bumpers. new tank and sending unit. new core support and bushings. the front clip was re-assembled with all new hardware. grill re-painted with satin black on top of an adhesion promoter. all the stainless is polished and ready to go back on. roof rail stainless has new foam installed on it. all the factory dark green tinted glass including the perfect factory windshield installed. rear and windshield put in with primer and urethane instead of the cheap tape kits. front and rear window molding clips all new and ready for moldings to be snapped in place. this car was complete when I took it apart. threw out a few things that needed replacing(front turn signals, couple of marker lights, and a couple of aluminum trim pieces come to mind). otherwise everything is there. all the wiring was in good shape and back in place. car had a factory roller tach cluster that was pretty nasty and expensive to restore, so I sold it to help build the mountain of cash that went into this thing. used the speedo/clock cluster from the malibu which was in nice shape.
major stuff to complete the car would be: headliner, door panels, carpet, motor/transmission( I have two 4 speed drivelines), exhaust, radiator. If you can swing a gun and turn a wrench, watch your nickels and dimes you could finish this thing for a lot less than buying a done one. they took a bunch of resto pics for me with a cheap digital camera I left there you can find at:  http://1968chevellesupersport.shutterfly.com/ 
have a contact at an oregon transport company that is really reasonable and will help get the car loaded for whoever comes for it. If you have any doubts about what you may be buying here please come look at it up close. everything was done right by a professional who cares about their work. this is a fixed price/make offer listing so everyone interested knows it is an honest sale and not some guy running it up with his buddies fake bids.

Auto Services in Washington

Wrench-N-Time Quality Auto ★★★★★

Auto Repair & Service, Automobile Electric Service
Address: 800 Grand Blvd, Vancouver
Phone: (360) 695-6526

Wesco Autobody Supply Inc ★★★★★

Automobile Body Repairing & Painting, Automobile Parts & Supplies, Automobile Body Shop Equipment & Supply-Wholesale & Manufacturers
Address: 13900 NE 20th St, Preston
Phone: (425) 746-9970

Tiny`s Tire Factory ★★★★★

Auto Repair & Service, Tire Dealers, Brake Repair
Address: 10805 Pacific Ave S, University-Place
Phone: (253) 531-4535

Taylors Mobile RV & Auto Service ★★★★★

Auto Repair & Service, Trailers-Repair & Service, Recreational Vehicles & Campers-Repair & Service
Address: South-Prairie
Phone: (253) 306-6493

Tayag`s Auto Repair ★★★★★

Auto Repair & Service
Address: 6185 4th Ave S, Southworth
Phone: (206) 767-7008

Specialty Motors ★★★★★

Auto Repair & Service, Brake Repair
Address: 12517 15th Ave NE, Kingston
Phone: (206) 367-4403

Auto blog

GM tinkering with Silverado, Sierra model mix amidst strong early sales

Mon, 04 Nov 2013

Variety, as they say, is the spice of life. That's a lesson that is currently being taught to General Motors, because despite a strong showing from its 2014 Chevrolet Silverado and GMC Sierra, the General's pickup sales still can't best those of cross-town rival Ford.
With 59,163 trucks moved, GM fell just over 1,000 units short of toppling Ford, and one of the main reasons for that, according to GM's chief sales analyst, was due to a lack of variety in the engines and body styles available on dealer lots. "We are still over-weighted toward crew-cab V8 trucks. Our light-duty mix will moderate over time as our launch progresses," said Kurt McNeil.
Loading dealers with the popular combination of the 5.3-liter V8 and the four-door, Crew Cab body style was intentional during the truck's launch, but as supplies of leftover 2013 models, which are being sold at heavy incentives, are beginning to wane, both budget-conscious and high-dollar buyers are looking elsewhere instead of at the volume model pickups.

Fewer than 1 in 3 Chevy dealers earn right to initially sell C7 Corvette

Mon, 01 Apr 2013

Looking to make the launch of the 2014 Corvette Stingray as efficient as possible, Chevrolet will be limiting the numbers of its dealers that can sell the all-new coupe and convertible. According to Automotive News, sales of the C7 Corvette will initially be limited to less than a third of Chevy's total dealership network when the 'Vette goes on sale this summer.
Only 900 dealers out of more than 3,000 locations nationwide will be allowed to sell the new Corvette at first, and the reason for this is so that there are no shortages at dealers that can actually get the cars sold. The article says that the 900 dealerships chosen represented 80 percent of total Corvette sales in 2012.
Some of the requirements dealers had to make to get initial allocation of Stingray sales include having sold at least four Corvettes in 2012 and having a Corvette Stingray specialist who will be required to have gone through a training session costing more than $2,000 per attendee. Once demand for the 2014 Corvette Stingray begins to subside - approximately six to nine months after it goes on sale - then allocation could open up to more dealers, but the report indicates this could happen following the 2014 model year.

Next-gen Chevy Cruze caught cruising in the cold

Wed, 13 Feb 2013

Spy photographers have caught what looks like the next-generation Chevrolet Cruze out on snow patrol. The camo could be tricking our eyes, but it look like it has an even tidier, more rounded front end and even lower fenders in relation to the top of the hood. And either a chunk of camo has been wedged between the side mirrors and the doors, or the mirrors are up for revision, too.
The door handles have been moved up the side of the car, leading the way to a rear end that grows a bit in length. If the rumors are true, the coming second-generation Cruze sits on the new D2XX platform that will replace the Delta and Theta platforms at General Motors. A global architecture, the Cruze will be the first to get it, but it will underpin everything from next Chevrolet Volt to the Equinox and could be responsible for 2.5 million units by 2018. The next Cruze is expected to begin production in GM's Lordstown, Ohio plant in the third quarter of 2014.