California Car 1970 Cheverolt Chevelle Ss 454 Clone Malibu on 2040-cars
Hackettstown, New Jersey, United States
Vehicle Title:Clear
Make: Chevrolet
Drive Type: automatic
Model: Chevelle
Mileage: 9,999
Trim: coupe
you are bidding on a 1970 chevelle california car that was made into a ss 454 clone. as u can tell by the trim tag this car was built in Van Nuys California plant as a 1970 chevelle malibu 2 door sports coupe 8 cylinder . it was painted green mist with a dark green interior.
The car spent its whole life in california untill 1994 when the owners family moved out to New Jersey. The car has never been "on the road" since then. It belonged to a kid i went to highschool with. his father had previously owned a bodyshop and it was a father and son project. they did a frame off restoration on the car between 1994 and 1999 but they never completed it. they had sent the car out for paint in 1999 and it sat in the body shop till 2004 when i traded him a 1967 camaro for the chevelle.
The way u see the car in the pictures is exactly the way i got it. it has been sitting in my moms garage since 2004 collecting dust. every time i thought id start working on it something would come up and sidetrack me. now in 2013 i have excepted that after buying a house im just not ever going to have the time to finish this car.
about the car....it has to be one of the cleanest origional sheet metal cars i have ever seen. the body is 100% gm sheet metal. you can pretty much eat off the car. the floors and trunk are perfict. along with most all the typical problem areas for chevelles. the car was stripped down to bare metal and i was told the only rot spot was on the pass quarter bottom right behind the rear wheel maby the size of a baseball??? i can see where there is filler there on the quarter and the inner wheel well. i can also tell you that at some point the weel well lip on the quarters was trimmed down to clear bigger tires. its not flush with the quarter pannel but its maby 1/3 the width now.(pictured) I am not a body guy by any means, but it appears that the only filler used on the car was for minor dent repair. obviously there is some where the quarter meets the roof and where the windshield pillars meet the roof as these spots were filled with lead from the factory. all the gaps in the body are nice(by gm standards). (pictured) . currently the car is in black primer with about an inch of dust.
the car has all the ss 454 options like power disc breaks, 454 engine, turbo 400 automatic transmission, 12 bolt posi rear end, boxed lower control arms and frame braces, ss rear bumper, and gm cowl induction hood.
the motor is in running condition, doesn t smoke or knock, and i can demo it for you. as far as any specs on it i have no info. just that it is a 454. and i did run the numbers at one point to verify it wasn t a 402. when i got it there was no distribuitor wires or carb so i just threw some on there to get it running. the wires will need to be replaced and the carb needs to be rebuilt.
the transmission is a turbo 400, and again i have no specs on it, the shifter cable/ linkage is not hooked up so i just leave it in neutural. aslo the trans lines are just looped with rubber trans hose. the hard lines will need to be run to the cooler.
the rear end is a chevelle 12 bolt posi. i dont know the gears, but i have verified its a posi because when u jack it up bolth wheels spin in the same direction and also the car i verry hard to push while the steering wheel is turned. It is not a buick, olds, pontiac, rear.
as u can see in the pictures it also has a floor shift steering column, buckett seats,power steering, and a ss dash.
the car will need to have all the break lines and fuel lines ran, also all the wireing hooked up(included with the car). all of the glass is there except for the windshield. i have the stainless windshield and back window trim. I t will aslo need an exhaust system from the headers back. the engine needs a powersteering pump and belt.
the car has a clean and clear nj title in my name.
On Feb-27-13 at 07:39:57 PST, seller added the following information:
The interior is mostly complete, it will need carpet, a floor shifter,a headliner, the sail panels,rear seat shelf cover and seat belts.
because the shifter is not hooked up, and the lack of break lines, you can t drive this car . it will have to be trailered home. if your trailer doesn t have a winch be prepared to use a come along.
On Feb-27-13 at 10:42:35 PST, seller added the following information:
the back seat and bucket seats are currently in the car. i took them out to take pictures of the floor pans which are usually problem areas on chevelles. The floors and trunk are 100% origional, no horrible patch jobs with those ugly weld seams front to back.
Chevrolet Chevelle for Sale
1967 chevy chevelle project tennesee title
Custom blue resto-mod(US $90,000.00)
1971 chevelle convertible project car(US $14,500.00)
1971 chevy chevelle 2 door hardtop, 327 engine, runs & drives(US $4,500.00)
Blue malibu 350ci auto - used as daily driver(US $10,000.00)
1965 chevrolet chevelle malibu
Auto Services in New Jersey
West Automotive & Tire ★★★★★
Tire World ★★★★★
Tech Automotive ★★★★★
Surf Auto Brokers ★★★★★
Star Loan Auto Center ★★★★★
Somers Point Body Shop ★★★★★
Auto blog
UAW to vote on strike at Kentucky Corvette plant
Tue, 08 Apr 2014The current wait time for a new Chevrolet Corvette Stingray is well, not short. With word of a strike at the Bowling Green, KY factory responsible for seventh-generation sports car, though, that wait time could end up growing substantially.
Now, a strike is still a ways off. UAW Local 2164, which represents the 800 workers responsible for screwing the Corvette together, is set to vote on authorizing a strike today, but even if the employees give the action a go, it's far from a sure thing. According to The Tennessean, both regional and national union officials would need to put their stamp of approval on strike action.
"The membership has to vote to strike, but it's just a step in the process," said Gary Casteel, the UAW's Region 8 director and one of the people that would need to authorize a strike action. Casteel told The Tennessean, "It's purely a local situation, though. They are having some issues with the local management."
C7 Corvette turbo with 1,000 horsepower promised from Hennessey
Mon, 25 Feb 2013If you can't wait for the next-generation Chevrolet Corvette ZR1, Hennessey says they will have you covered. The Texas-based company has announced it will offer a spate of upgrades for the 2014 Corvette ranging from a range of bolt-on options all the way up to a 1,000-horsepower, twin-turbo system. Buyers can start with a cold air intake, cat-back exhaust or stainless steel long-tube headers, but Hennessey says it will also offer up three stages of forced induction mayhem should those bits and baubles not provide enough thrust.
Those choices start with a supercharger system good for up to 700 hp, though Hennessey will gladly ditch the blower in favor of two turbos. Doing so will spin the crank to the tune of 800 horsepower all the way up to a certifiably ludicrous 1,000 ponies. There's no word on how much these tricks will cost you - or when they will be available, as we're guessing they haven't gotten their hands on the car yet - but you can head over to the Hennessey site to drop them a line if you're curious.
Submit your questions for Autoblog Podcast #321 LIVE!
Tue, 19 Feb 2013We're set to record Autoblog Podcast #321 tonight, and you can drop us your questions and comments regarding the rest of the week's news via our Q&A module below. Subscribe to the Autoblog Podcast in iTunes if you haven't already done so, and if you want to take it all in live, tune in to our UStream (audio only) channel at 10:00 PM Eastern tonight.
Discussion Topics for Autoblog Podcast Episode #321
Unibody Ford Ranger replacement