For more information, please call Jim --- 215-834-0754 "In 1981, there was only one powerplant available, a 350 cu in (5.7 L) engine that, like the L-48 base engine the previous year, produced 190 hp (142 kW), but was now designated the L81. The motor was certified in all states and available with manual or automatic transmissions. Chrome air cleaner lids and cast magnesium valve covers dressed up all engines. The stainless steel exhaust manifolds and computer control system introduced on the 305 cu in (5.0 L) California engines the previous year were now standard, as was an auxiliary electric engine cooling fan. This, the last C3 available with a manual transmission, so equipped, had a published 0-60 mph in 8.1 seconds. This model year was the first to use a fiberglass rear spring, now a Corvette trademark. The spring saved thirty-six pounds, but was limited to base suspensions with automatic transmission. When equipped with Delco's new optional ETR (Electronically Tuned Receiver) radio with digital clock, the quartz analog instrument panel clock was replaced with an oil temperature gauge. The cast aluminum wheels, optional since ’76, were now ordered on 90 percent of the cars at a cost of $428.[6] New options included a power adjustable driver’s seat and power remote outside mirrors. In mid-1981 production shifted from St. Louis, Missouri to Bowling Green, Kentucky, and several two-tone paint options were offered." (Excerpt from Wikipedia.com) "1981 was the first year Corvettes were ever produced in two factories at one time. The new Bowling Green, Kentucky plant produced its first Corvette on June 1, 1981 while the St. Louis plant was producing its last Corvettes. The last St. Louis Vette was produced on August 1, 1981. All St. Louis Corvettes were painted with lacquer paints while the new Bowling Green plant had a brand new paint facility and used enamels with clear top coats. 1981 was the last year a manual transmission was available until late in 1984 with the C4. Automatic transmission Corvettes were equipped with a new fiberglass re-enforced rear mono-spring. This spring was 33 pounds lighter than the steel spring. Cars with the manual transmissions or the Gymkhana suspension package still received the steel spring. A new two-tone paint process was available for the first time from the Bowling Green factory. The computer command control which was used on the California Corvettes in 1980 was now standard on all Corvettes. The stainless steel exhaust manifold from the California Vettes was also standard, it weighed 14 pounds less than the cast iron manifold and flowed better as well. A new chromed air cleaner cover was added to the engine compartment. California buyers could finally buy a manual Corvette this year. A quartz clock was now standard and a six-way power seat was optional. Electronic tuning radios could have an optional CB radio or an 8-track tape player. 1981 marks the first year that Corvette body style numbers were incorporated into the VIN number instead of being a separate number." (Excerpt from Vettefacts.com)

Auto Services in Pennsylvania

Yardy`s Auto Body ★★★★★

Automobile Body Repairing & Painting

Address: 5410 Progress Blvd, Mc-Murray

Phone: (412) 854-5070

Xtreme Auto Collision ★★★★★

Automobile Body Repairing & Painting, Automobile Parts & Supplies, Auto Body Parts

Address: 9907 Bustleton Ave, Holland

Phone: (215) 676-2660

Warwick Auto Park ★★★★★

Auto Repair & Service, Used Car Dealers

Address: 700 Furnace Hills Pike, Willow-Street

Phone: (717) 625-3500

Walter`s General Repair ★★★★★

Auto Repair & Service

Address: 195 N Spruce St, Watsontown

Phone: (570) 584-2257

Tire Consultants Inc ★★★★★

Auto Repair & Service, Tire Dealers, Tires-Wholesale & Manufacturers

Address: 560 N Reading Rd, Reamstown

Phone: (717) 733-0388

Tim`s Auto ★★★★★

Used Car Dealers, Wholesale Used Car Dealers

Address: 379 Gravity Rd, Archbald

Phone: (570) 937-9248

Auto blog

Chevy Camaro is a good sport, wishes Ford Mustang Happy 50th

Tue, 15 Apr 2014

It was 1966 when Chevrolet launched its challenger to the wildly successful Ford Mustang, the Camaro. While the competition between the two brands was already healthy, the arrival of the Camaro set off one of the most intense, model-to-model rivalries in the industry.
That competitive spirit hasn't stopped Chevy and the Camaro from wishing Ford's iconic muscle car a Happy 50th Birthday as the Ford's April 17 anniversary rolls around. These two cars have been linked over the years, and while the rivalry took a break for a few years in the 2000s, today's competition between the Camaro and Mustang is as fierce as it's ever been.
You might recall that this friendliness when it comes to major milestones isn't too rare. Ford put on quite a display for General Motors' hundredth anniversary back in 2008. As the Camaro's fiftieth birthday approaches in 2016, we wouldn't be surprised to see the Mustang sending its best wishes to its Bowtie rival.

Chevy exec confirms SS production model reveal at Daytona on Feb 16

Wed, 06 Feb 2013

The 2014 Chevrolet SS will make its racing debut for the 2013 Daytona 500, but the production version of the car will get its official unveiling on February 16 in Daytona, a week before The Great American Race. According to a report by Automotive News, the reveal has been confirmed by Jim Campbell, Chevy's US vice president of performance and motorsports. With the departure of the Dodge Charger, the new Chevrolet racecar will be the only competitor to feature a V8, rear-wheel-drive layout in both street and NASCAR form.
NASCAR fans will be able to see the new fullsize performance-oriented sedan on display in the festivities leading up to the Daytona 500, but the car won't go on sale until later in the year. The Australian-built Chevy SS will be a low-volume performance model, and it will be priced above the 2014 Impala, which starts at $27,535.

Next-gen GM SUVs caught wearing new boxy bodies [w/video]

Wed, 15 May 2013

We recently drove the brand-new 2014 Chevrolet Silverado and found it to be vastly improved compared to the outgoing model. And now that The General's pickup trucks have been squared away, it's time to focus our attention onto their passenger-friendly companions, the Chevrolet Tahoe and GMC Yukon (above).
Our spy photographers have passed along a huge smattering of photos (and a video), showing the new SUVs out testing. Both the short- and long-wheelbase models were spied, and while the overall shape of the vehicles hasn't changed all that much, we expect the updates to be substantial. In addition to new powertrain options, like GM's new small-block V8, we expect the interiors of both SUVs to get massive makeovers, providing better materials throughout their cabins and quieter, more refined environments. We even hear that some trick new suspension developments may be in store for upper-end models.
Visually, these spy shots allow us to see a couple of new details on the SUVs' front and rear fascias, including LED running lamps on the Yukon and some interesting LED taillamp treatments. Of course, the obvious third party missing from this set of photos is the Cadillac Escalade, but as we reported earlier, GM is working to further differentiate the 'Slade from the rest of the fullsize SUV lineup, and is working to make the new model "much less ostentatious."

Chevrolet Corvette Coupe 2-door on 2040-cars

Chevrolet Corvette for Sale