1959 Chevrolet El Camino,low Rider,rat Rod,custom,hot Rod,58,60,61,57 on 2040-cars

Auto blog

Final C6 Corvette built in Bowling Green

With all of the attention given to the 2014 Chevrolet Corvette Stingray lately, you could be forgiven for thinking that it's already well along in production, yet tooling up for the new C7 has only just begun. In fact, production of the outgoing C6 generation in Bowling Green, Kentucky just halted on Thursday.
As the C6 has aged, production numbers have predictably ebbed along with demand, but this year, the addition of the 427 and 60th anniversary models resulted in an uptick in vehicles built - this, despite a model year shortened by around 25 percent to accomodate the new model changeover. The final C6 Corvette ever, No. 13,466 built this year, was a white 427 Convertible destined for the General Motors Heritage Center museum. The car's 7.0-liter V8 heart was assembled by Corvette chief engineer Tadge Juechter himself.
In total, Bowling Green pushed out 215,100 C6 Corvettes over nine years. If you're still a C6 fan at heart and are hoping to get a good deal on a phase-out model, step lively - Chevrolet reportedly had about 6,100 unsold units, which Autoweek suggests is good for around five and a half months of supply at the model's current sales rates. Given that demand will likely slacken even further as the C7 draws closer, that should be a big enough stockpile to keep dealers satisfied until 2014 Stingrays begin showing up on their forecourts in December.

Experimental mid-engine XP-819 Corvette going up for auction

It seems to be commonplace that when a new Corvette is in development, rumors swirl about a possible mid-engine layout. As is the case of Chevy's most recent C7 Corvette, these rumors never pan out.
In any case, the idea for a 'Vette with an engine mounted behind the driver can probably all be traced back to a single car, the 1964 XP-819 prototype. Built as an "engineering exercise" back in 1964, the prototype was designed with a rear-mounted engine. History tells us that the idea of a rear-engine Corvette fizzled, and the XP-819 was eventually cut up into pieces and stored at a shop in Daytona Beach, FL.
After sitting for untold years, a restoration project started on the car, and while it isn't yet fully completed, the current owner of the car, Mid America Motorworks, will have the car on display at the 2013 Amelia Island Concours d'Elegance as a "driveable chassis" with hopes of having a fully completed car ready to bring to next year's show.

GM recalling 250,000 SUVs over door electronics

After a door-fire investigation that dates back to February, the National Highway Traffic Safety Administration has officially announced a recall today that affects around 250,000 General Motors SUVs for a faulty driver's door module. The recall applies to the Buick Rainier, Chevrolet Trailblazer, GMC Envoy, Isuzu Ascender and Saab 9-7X from the 2006 and 2007 model years, as well as the 2006 Chevrolet Trailblazer EXT and GMC Envoy XL for vehicles sold and/or registered in the Snow Belt.
Road salt use in these midwestern and northern states can lead to corrosion of the driver's door module on these GMT360 and GMT370 vehicles, which allows water to come in contact with the circuit board. If shorted out, the vehicle's power door locks and power windows will not work, and could possibly lead to overheating and, in some circumstances, a fire. No official word on how many total vehicles caught on fire, but back in June, 28 fires had been reported to the government agency. A fix for the problem is still being worked out, but all affected vehicle owners will be notified by GM.
Scroll down for the official NHTSA statement.