Awesome 85 El Camino street rod. Both bumpers have been completely removed and replaced with fiberglass replicas. The rear is molded in as a roll pan. Very nice job.
Custom LED tail lights. No front marker lights, although they could be replaced. All side trim and door handles have been removed and filled. Also done very well. Has an all steel cowl induction hood. All body panels fit very well.
The car is painted in Black Satin with burgundy flames on the front. The flames are very subtle. I would call the paint job a high level amateur job. And, it is showing some age in a few places. Somehow, it really just fits this car. I take this car to local shows and it is always a real attention getter. It just has a cool, aggressive look. The flaws are never pointed out by anyone.
All body mods were done by the previous owner before I purchased the car.
Interior is custom with a custom padded/fully upholstered dash, custom headliner,(no sunvisors) early buckets with embroidered SS headrests, large bowtie emblems in the door panels.
Car has the full gauge dash with everything working except the warning lights since the car no longer has sensors. Factory molded rubber carpet. Fits the look of this car perfectly
Engine is a 350/300hp crate motor with less than 5k miles and with the following done this month: new Edelbrock e200 heads,new Edelbrock polished intake and dual Edelbrock carbs. New Hooker headers. Comp cams camshaft, pushrods, lifters and roller rockers.
The carbs are 1405's which have been restricted and re-jetted down to 400cfm each. Gives excellent throttle response but still the awesome look and sound of dual quads. Plus, the total of 800cfm is perfect for a built 350 street car. I knew from experience that 1200cfm from dual 600s makes for a very soggy bottom end. Since all my driving is around town and a little stop light to stop light action. I went this way. The restrictors are very easily removed. And you would just have to re-install the factory jets.
Factory A/C is complete and fully charged. I have not put a belt on the compressor since adding the tall valve covers which required slightly relocating the compressor. You would have to get a correct length belt and possibly fabricate a brace. But it is complete and functional
Also done this year: new water pump, alternator, power steering pump, power steering hoses, battery, starter, brake master cylinder, rotors, calipers and front wheel bearings, tie rod ends, idler arm, drag link.
Trans is a TH350 with modified valve body and B&M convertor. Trans shifts very hard and has no kickdown (passing gear). I purchased the transmission from a private party as a rebuilt. I cannot verify that, but it shifts perfectly with no slipping or overheating.
Stock rear axle with 4:10 posi gears. These gears were in the car when I purchased it and I have not had the rear end apart to verify the ratio. I am going on the previous owner's info. However, I can tell you that based on simple math, it is, at least, very close. So, the car is quick for a Gbody. But you won't be winning any top speed competitions.
True Centerline wheels in excellent shape. Front tires are new, rear tires are about 40%
I have had many hot rods, but this is easily the most fun car I can remember.
Now for the bad (but not so bad).
The car still needs front control arms and ball joints. But drives fine.
There are 2 spots of rust: one over the passenger door, and the window sill of the driver's door. I have included pics of each. The rest of the car, particularly the undercarriage is remarkably rust free.
The paint really does look planned and has a great look from 10 feet. But, it is beginning to look a little tired. The one problem with satin paint is that spot repair is almost impossible. That said, you will not be embarrassed to have it as it sits.
The stereo is a cheap unit with large speakers in the spare compartment behind the seats.
Because the Edelbrock heads relocate the exhaust ports 1/2" higher, the Hooker headers fit VERY tight. If you plan to test the HP limits very often, you should consider going to half lengths like the patriot clipsters. But the headers are brand new and connected to the welded 2 1/2" dual exhaust. Sounds Awesome!!!!
As with most hobbyists, I have come across a new project which I simply can't live without. So, this one has to go. I put the heads and intake on intending to take the car up a notch for the local shows. The engine runs perfectly and is very quick. But, the entire top end only has 3 miles on it. The headers still stink when they get hot. So, I wouldn't recommend jumping in and driving 800 miles home. No problems, at all, that I know of. But aluminum heads are expensive so I would put a few more easy miles on them before spending 12 hours on the highway. The heads were done right, and retorqued after the first heat cycle. But better safe than sorry. Remember, a TH350 with these gears turns around 3600rpm at 60mph.
Plus, feeding two 4bbls would probably cost more than renting a trailer. I removed the tag when I decided to make the change, and I am not going to register and insure it to put more miles on it. As I said, I am changing projects.
Because of this, and since I live near the end of the earth, I will deliver this car (on a trailer) as long as the car and delivery costs are paid in full before I leave my driveway. Contact me to work out a price if you want.
Lastly, I have to say this: this is an old hot rod. Not a new show car. There will be dents and bruises. I have mentioned those that catch my eye. Also, this is not a race car and I did not build it to be a race car. I don't know the dyno HP, and I don't know the top speed. But I do know that this is a very fun, and so far, very reliable ride. It has been my weekend cruiser for a little over a year and I have enjoyed every minute.
Also, please remember that you are bidding to own the car. Not to come check it out. No joyrides. You are absolutely welcome to check the car out before you bid. Ask any questions first, and I will answer them as honestly as possible. I'm a 60 year old guy who has been building cars my whole life. I'm not out to scam anybody's money, I just want a happy transaction.
This is a great deal for somebody. The buy it now price just about covers what I have in the engine and transmission.
Thanks for looking!
Chevrolet El Camino for Sale
Auto Services in Florida
Auto Repair & Service, Tire Dealers, Auto Oil & Lube
Address: 200 E Gulf Atlantic Hwy, Oxford
Phone: (352) 748-1739
Auto Repair & Service, Automobile Parts & Supplies, Auto Transmission
Address: 4899 34th St N, Pass-A-Grille
Phone: (727) 526-0120
Auto Repair & Service, Auto Oil & Lube, Truck Service & Repair
Address: 15519 US Highway 441 Ste 102, Minneola
Phone: (352) 357-0576
Auto Repair & Service, Automobile Body Repairing & Painting, Truck Body Repair & Painting
Address: 1136 E 9th St, Dinsmore
Phone: (904) 257-1386
Used Car Dealers, Wholesale Used Car Dealers
Address: 8600 SW 8th St, Pinecrest-Postal-Store
Phone: (305) 264-8189
Auto Repair & Service, Automobile Parts & Supplies, Automobile Seat Covers, Tops & Upholstery
Address: 20 S 5th St, Eloise
Phone: (863) 422-8703
Auto blog
Wed, 06 Nov 2013
Chevy's goal at the SEMA Show in Las Vegas this week seems to be to show as much of its Performance and Accessories catalog as possible. That's why it brought three different Camaros - two with V8s and one powered by a V6 - with all of the best goodies from the catalog already fitted.
We gave a more in-depth recap of the Performance Camaro V8 Concept, the Performance Camaro V6 Concept and the Performance Garage Concept already, but we figured you'd like a short recap for each. It should be noted, though, that you can order all of the items you see here for your own Camaro, so be sure to take a long, hard look at our live galleries, just in case you're in the market for some mods.
Essentially, the Performance Garage Concept and the Performance V8 Concept are the same car - the only difference is that the later features a whole host of aesthetic tweaks in addition to its aftermarket, shorty exhaust headers and 2.75-inch exhaust. (The Performance Garage Concept has been usefully placed on its side; the better to see the new parts added to the vehicle.) The Performance V6 Concept is notable because, despite being a V6, there's no shortage of performance goodies fitted. All three of the Performance Camaros benefit from items from the Camaro ZL1, which can also be ordered through the catalog.
Fri, 21 Sep 2012
General Motors is recalling some 426,240 sedans that may have a faulty transmission shift cable, according to a National Highway Traffic Safety Administration report this morning. The recall concerns a fault within four-speed automatic transmissions equipped on 2007-2010 Saturn Aura models, and 2008-2010 Chevrolet Malibu and Pontiac G6 models.
The report specifies that tabs on the transmission shift cable may fracture and separate. Such a fault could cause a discrepancy between the actual position of the transmission and the apparent position of the shift lever.
GM is currently working to notify owners of the vehicles in question, and dealers will check and replace shift cables free of charge. Scroll down to read the complete NHTSA report.
Wed, 06 Feb 2013
The 2014 Chevrolet SS will make its racing debut for the 2013 Daytona 500, but the production version of the car will get its official unveiling on February 16 in Daytona, a week before The Great American Race. According to a report by Automotive News, the reveal has been confirmed by Jim Campbell, Chevy's US vice president of performance and motorsports. With the departure of the Dodge Charger, the new Chevrolet racecar will be the only competitor to feature a V8, rear-wheel-drive layout in both street and NASCAR form.
NASCAR fans will be able to see the new fullsize performance-oriented sedan on display in the festivities leading up to the Daytona 500, but the car won't go on sale until later in the year. The Australian-built Chevy SS will be a low-volume performance model, and it will be priced above the 2014 Impala, which starts at $27,535.
** rare *** numbers matching "396" *** 1966 el camino *** 4-spd !!!!!
1981 chevrolet el camino base standard cab pickup 2-door 5.0l
1980 chevrolet el camino custom paint digital dash v8 350 hot rod show car!
1970 el camino with 95 lt1 engine