Gold Two Toned 1987 El Camino, Running And No Rust, Good Condition on 2040-cars
Salida, Colorado, United States
1987
El Camino, 305 V8, automatic. 89,500 original miles. It runs as good as a 1987 unmodified
El Camino with a 305 and a 2004r with 2.73 gears could ever run! New headlights, new whitewall
tires, new shocks all around, new weather stripping and felt on doors/door
windows. Replaced pins and bushings on driver’s side door, new cruise
control/blinker switch on steering column, new locking gas cap and new dome
light :). Carpet is good, seats are good to fair, bed liner is perfecto. Clear coat oxidation beginning on hood and roof. No rust. This vehicle has had only two owners. Payment within 7 days, or sale null and void. Cash/cashier check only, buyer pick up arrangements upon sale. |
Chevrolet El Camino for Sale
Auto Services in Colorado
Windsor Car Care ★★★★★
West Side Auto Body & Towing ★★★★★
Toyexus Service ★★★★★
Tito`s Cash for Cars ★★★★★
Suzuki-Mccloskey ★★★★★
Red Rock Auto Clinic ★★★★★
Auto blog
C7 Corvette turbo with 1,000 horsepower promised from Hennessey
Mon, 25 Feb 2013If you can't wait for the next-generation Chevrolet Corvette ZR1, Hennessey says they will have you covered. The Texas-based company has announced it will offer a spate of upgrades for the 2014 Corvette ranging from a range of bolt-on options all the way up to a 1,000-horsepower, twin-turbo system. Buyers can start with a cold air intake, cat-back exhaust or stainless steel long-tube headers, but Hennessey says it will also offer up three stages of forced induction mayhem should those bits and baubles not provide enough thrust.
Those choices start with a supercharger system good for up to 700 hp, though Hennessey will gladly ditch the blower in favor of two turbos. Doing so will spin the crank to the tune of 800 horsepower all the way up to a certifiably ludicrous 1,000 ponies. There's no word on how much these tricks will cost you - or when they will be available, as we're guessing they haven't gotten their hands on the car yet - but you can head over to the Hennessey site to drop them a line if you're curious.
Indian tuner turns Chevy Optra into Mustang 'Eleanor' replica
Fri, 03 Aug 2012If you are a big fan of automotive oddities, this may come as a little treat. If you are a Shelby or Mustang diehard, prepare to have your sensibilities violated.
The master fabricators at BigDaddyCustoms are the minds behind what you see above. At first, it appears to be a slightly misshapen custom Mustang, modeled after "Eleanor" from Gone In 60 Seconds, but upon further examination, something appears to be amiss. In fact, the custom shop, based in India, has created an Eleanor replica grafted upon a lowly Chevrolet Optra. While it may take a second for the Optra to ring a bell, you should recognize its badge-engineered sibling, the Daewoo Lacetti, used on Top Gear.
We don't know what star would opt for the Reasonably Priced Car in Shelby's clothing, but it's clearly someone more concerned with the aesthetic than the performance credentials of this automotive mash-up.
GM recalls 8,500 Chevrolet Malibu models for rear suspension glitch
Mon, 04 Feb 2013According to a letter from General Motors to the National Highway Traffic Safety Administration, flaws in the build process of the 2013 Chevrolet Malibu have led to the recall of 8,519 cars. Units built between December 6, 2011 and January 15, 2013 may have been assembled with rear suspension cradles that had insufficient torque applied to certain bolts. That out-of-spec assembly could lead to issues ranging from slight noises to a loss of vehicle control.
The problem was first noticed in December of last year by a GM test fleet driver and eventually tracked back to the improperly torqued bolts on the suspension cradle assembled through July 2012 by a supplier located not too far from the Malibu's Detroit/Hamtramck Assembly Plant. Since an official NHTSA recall notice has not been issued yet, it isn't clear whether or not Detroit-built Malibus were the only ones affected (the 2013 Malibu is also built at GM's Fairfax Assembly Plant in Kansas City, Kansas). Dealers will fix the problem by inspecting vehicles for proper torque specs, retightening if not within specs and, in some cases, perform a rear-wheel alignment.