1996 Chevrolet S10 Drag Toy Bbc 454 With A Very Healthy Cam on 2040-cars
Jacksonville, Arkansas, United States
Body Type:Standard Cab Pickup
Engine:4.3L 262Cu. In. V6 GAS OHV Naturally Aspirated
Vehicle Title:Clear
Fuel Type:GAS
For Sale By:Private Seller
Number of Cylinders: 6
Make: Chevrolet
Model: S10
Trim: SS Standard Cab Pickup 2-Door
Warranty: Vehicle does NOT have an existing warranty
Drive Type: RWD
Mileage: 0
Exterior Color: Black
You are looking at a very nice very well built drag toy. The truck is a 1996 Chevrolet S-10 single cab. The truck was built with all the right parts and the kinks have been worked out. It is turn key ready for the track. This monster has a BBC 454 with a very healthy cam. Motor was built with all great parts by racing shop in N Little Rock. He is great and has been winning races for years at Prescott and Centerville. It has drag lights all the way around with the widest Hoosier slicks you can put on the rear without tubing in it. Transmission was built and has a 3500 stall. All msd ignition and coils. Clean title and with a little work it could easily be put back on the street if you wanted it to. It has about 5 passes in the truck and one was with nitrous. It has a 125 shot on it. My son is more into motorcross so I don't have time for this toy. I hate to see it go, but my loss is your gain.
I have vehicle listed locally as well. So if it sells I will remove the listing on Ebay. Email serious offers only. Truck has low reserve and is worth every penny.
Chevrolet S-10 for Sale
- 1983 chevrolet s-10 drag strip racing truck rolling chassis(US $5,500.00)
- 2002 chevrolet s-10 ext cab white
- S-10 ls 2002 extended cab flare side 4x4 pickup 78k miles 4.3 v6
- 1994 chevrolet s10 ls standard cab pickup 2-door 4.3l no reserve
- 1984 chevy s-10/ custom paint/ v-8 swap/ 388 stroker 350 turbo trans
Auto Services in Arkansas
Spittler Tire & Auto ★★★★★
Robert Sangster Garage ★★★★★
Precision Tune Auto Care ★★★★★
Prairie Grove Tire & Lube ★★★★★
Napa Auto Parts - Collier Auto Supply Inc ★★★★★
M & M Tire-Auto/Goodyear Tire ★★★★★
Auto blog
Check out the official 2013 Trans Am Hurst Edition commercial
Sat, 16 Mar 2013
The Poncho is dead. Long live the Poncho. Like certain other reoccurring personal maladies, the aftermarket community simply can't let the Trans Am go without another flare up. The guys at Trans Am Depot have worked up a quick commercial for their newest creation: The 2013 Trans Am Hurst Edition, and it watches pretty much like you'd expect it to. The footage is comprised of just about every TA male fantasy you can conceive of, from Daisy Dukes and white tank tops to tramp stamps, bikinis and ice cream cones. There simply aren't words for what you'll see below.
Of course, we like our T-Tops as much as the next guy. If you like what you see in the videos, you can pick up your very own TA by heading over to the Trans Am Depot site. The guys even have Chevrolet Camaro-based versions of the Pontiac GTO if the '77 TA treatment is too much for your tastes. Enjoy, but don't say we didn't warn you.
Next-gen Chevy Cruze caught cruising in the cold
Wed, 13 Feb 2013Spy photographers have caught what looks like the next-generation Chevrolet Cruze out on snow patrol. The camo could be tricking our eyes, but it look like it has an even tidier, more rounded front end and even lower fenders in relation to the top of the hood. And either a chunk of camo has been wedged between the side mirrors and the doors, or the mirrors are up for revision, too.
The door handles have been moved up the side of the car, leading the way to a rear end that grows a bit in length. If the rumors are true, the coming second-generation Cruze sits on the new D2XX platform that will replace the Delta and Theta platforms at General Motors. A global architecture, the Cruze will be the first to get it, but it will underpin everything from next Chevrolet Volt to the Equinox and could be responsible for 2.5 million units by 2018. The next Cruze is expected to begin production in GM's Lordstown, Ohio plant in the third quarter of 2014.
GM recalls 8,500 Chevrolet Malibu models for rear suspension glitch
Mon, 04 Feb 2013According to a letter from General Motors to the National Highway Traffic Safety Administration, flaws in the build process of the 2013 Chevrolet Malibu have led to the recall of 8,519 cars. Units built between December 6, 2011 and January 15, 2013 may have been assembled with rear suspension cradles that had insufficient torque applied to certain bolts. That out-of-spec assembly could lead to issues ranging from slight noises to a loss of vehicle control.
The problem was first noticed in December of last year by a GM test fleet driver and eventually tracked back to the improperly torqued bolts on the suspension cradle assembled through July 2012 by a supplier located not too far from the Malibu's Detroit/Hamtramck Assembly Plant. Since an official NHTSA recall notice has not been issued yet, it isn't clear whether or not Detroit-built Malibus were the only ones affected (the 2013 Malibu is also built at GM's Fairfax Assembly Plant in Kansas City, Kansas). Dealers will fix the problem by inspecting vehicles for proper torque specs, retightening if not within specs and, in some cases, perform a rear-wheel alignment.