1968 Chrysler Newport Custom 383 Auto on 2040-cars
Newburgh, New York, United States
|
Please Read all of the Details
Recent things done (Engine and Suspension) -383 Motor rebuilt by Previous owner, Flat Top Pistons (2008), had heads off no carbon or black at all on the pistons, walls were in excellent shape. -Heads re done, Put 346 heads on because they have hardened seats, full valve job, magnafluxed. Heads came off of a cuda, and I am almost positive these are six pack heads. -Comp Cams k-21-223-4 just put in May 2014. Duration 268/280, Lift .477/.480, Double roller Timing Chain, Heavy Springs with damper, 10 degree locks. -Edelbrock 1805 AVS Thunder Series 650 CFM -Performer Rpm Intake -Hedman Shortie Headers -New water pump,thermostat, thermostat housing -New Aluminum Radiator, car doesn't get above 160 even in 90 degree temps -New Belts, Hoses, Spark plugs, spark plug wires, distributor cap -Pertronix electronic ignition kit and Pertronix Flamthrower 2 Coil -New fuel pump, fuel filter -Only thing not replaced was oil pump. -New motor Mounts -New tranny filter and pan gasket -New Shocks, rear has load levelers -New upper and lower ball joints -New Wheel cylinders and brakes -Brake lines new accept rear one in good shape. -Fuel lines in good shape -New Gas tank and straps Recent Things Done (Body and Interior) -All trim removed fixed rust on lower fenders and quarters(Rust eliminated but body work not perfect) -Roof was pitted filled in with body filler(Not perfect but much better) -Any rust spots were treated with rust mort -Entire inside of the car inside the doors, and trunk were treated with rust mort then painted with por 15 -Frame was coated on the inside with eastwood frame coating -New Carpet -Heater core box rebuilt with new motor and heater core -Seats are original but have seat covers as they aren't in the best of shape more the rear seats. -Aftermarket Fuel, Oil Pressure, Temperature, and Rpm -Rear window had some rust on the upper driverside corner, removes all old weather stripping treated rust with rust mort, painted inside the grooves with por 15 resealed and put chrome back on, chrome does not sit flush as per the repair, had to clear silicone around the rear window as well. -Trunk repaired with trunk extension and some holes that were in the trunk were fiber glassed, The trunk does still leak but I have the new trunk seal. -Firewall did have some minor holes in it cut and patched with gorilla hair. - Where the heater core box connects to the corner side of the firewall on the passenger side was rusted and needed to cut a small piece out, it is currently sealed up and there is no piece connecting from the firewall to the heater core box where outside air would normally rush in. The heat works great as well as the defogger. - It also has a small hi torque starter - It does leak a small amount of oil after the car has been ran for a while, maybe a few drips, oil level has not gone done and pressure is always around 60 - It does not have a full exhaust. I have some flex pipe running off of the headers into glasspacks with turn downs. -Manual Choke cable for carburetor - The transmission needs a bigger stall convertor to really feel the power after the engine modifications. - Also the rearend has the original highway gears 2.96 I believe, will most likely benefit from installing higher gears(3.55 etc...) - The speedometer is off but I have a new speedometer cable. - All the lights work, blinkers, brake lights, reverse lights(Reverse lights are hooked up to a switch, but I still have the steering column piece) - Also I have a set of fuses and extra bulbs. -I am also including a New set of Hedman 78030 Long Headers. Shorties are on there now. -Has original bumper jack and has a spare but the spare needs a new tire but the tires on the car are brand new cooper cobra 225 70 14. -I am including all of the chrome which is not on the car, the head liner metal rods and any other parts I can find that I have that were not used. - The car starts up and drives with no problems, the car will need body work, some electrical for the gauge cluster and radio. -The car is being sold AS-IS -Buyer is 100% responsible for picking up or shipping |
Chrysler Newport for Sale
1962 chrysler 300 2 door hardtop original condition
1967 chrysler town & country 9-pass wagon 440 tnt/tqflite/8 3/4 rear runs great!
1951 chrysler windsor deluxe newport 2 door hardtop rust free body
1964 chrysler newport convertible big block clean,rust free western car(US $10,000.00)
1980 chrysler newport-318, runs great!rebuilt trans, lean-burn is bypassed,(US $1,995.00)
Auto Services in New York
West Herr Chrysler Jeep ★★★★★
Top Edge Inc ★★★★★
The Garage ★★★★★
Star Transmission Company Incorporated ★★★★★
South Street Collision ★★★★★
Safelite AutoGlass - Syracuse ★★★★★
Auto blog
Chrysler recalls small number of 2013-2014 cars and trucks over engine debris
Thu, 12 Dec 2013Chrysler is recalling a small number cars over issues with their 2.4-liter four-cylinder engines. The recall, which affects 522 examples of its 2013 Dodge Avenger and Chrysler 200 models, as well as 2014 Jeep Compass and Patriot CUVs has to do with potential debris in the balance shaft bearings.
The abrasive stuff can cause the oil pressure to drop, which could lead to the engine stalling or outright failure. This situation could at best leave drivers stranded and at worst lead to a crash.
Chrysler will begin notifying owners, who will need to report in to have the balance shaft module replaced. All repairs are naturally free of charge. Scroll down for the bulletin from NHTSA.
Chrysler patents smarter minivan folding seats
Thu, 02 Jan 2014It's frightening to think of how quickly the mice would have overtaken us if we hadn't stayed one step ahead of them with better mousetraps. We'll never have to worry about that in our relentlessly re-engineered world, though. Case in point: Chrysler has been granted a patent by the US Patent and Trademark Office for an improved design of the already wondrous Stow 'n' Go seating found in the automaker's Town and Country and Dodge Grand Caravan minivans.
Introduced in 2005, the Stow 'n' Go was improved in 2008, and based on the drawings of this third-generation improvement, the new design appears to allow stowage of the second row of seats without having to move the front-row seats forward as much. It look like it also involves fewer operations and moving parts, with a portion of the seatback being incorporated into the flat floor when the seats are stowed, as opposed to having a completely separate cover.
It's possible that the innovation may appear on the next-generation minivans expected in 2015, but Chrysler isn't commenting on the patent.
Chrysler's Jefferson North plant builds 5-millionth SUV [w/video]
Thu, 15 Aug 2013Chrysler's Jefferson North Assembly Plant opened in 1992 for production of the first Jeep Grand Cherokee, but in the subsequent years, the Detroit plant has gone on to produce some of the company's biggest SUVs including the Jeep Commander and Dodge Durango. Earlier this week, the plant produced its five-millionth SUV, which, fittingly, was a Grand Cherokee.
Celebrating the plant's five-millionth unit, the silver 2014 Grand Cherokee was promptly donated to the USO. In addition to this milestone SUV, Chrysler also had a near-perfect 1993-95 ZJ Grand Cherokee on hand for the photo op. Scroll down for the Chrysler press release as well as a video showing some of the speeches from the celebration.