2008 Chrysler Pacifica Lx Heated Leather Dvd Only 84k Texas Direct Auto on 2040-cars

Auto blog

2015 Chrysler 200 snags EPA ratings of 18 mpg city and 29 highway

While Chrysler hasn't officially announced fuel economy figures for its new 200 sedan, the information for one model has just leaked out thanks to the US Department of Energy's FuelEconomy.gov website. It certified the 200 with the 295-horsepower and 262-pound-feet 3.6-liter Pentastar V6, nine-speed automatic and all-wheel drive as getting 18-miles-per-gallon city, 29-mpg highway and 22-mpg combined.
Last year's front-wheel drive 200 with a less-powerful version of the Pentastar was rated at 19-mpg city, 29-mpg highway and 22-mpg combined. That means that buyers are getting more power and all-wheel drive traction at almost no loss in economy. However, compared to current, all-wheel drive sedan competitors, the Chrysler comes in the middle. The Ford Fusion with all-wheel drive with the 2.0-liter EcoBoost four-cylinder has 240 hp and 270 lb-ft of torque is somewhat down on power but bests it in economy at 22-mpg city, 31-mpg highway and 25-mpg combined. The current Subaru Legacy 3.6R loses in both metrics with 256 hp and 247 lb-ft and a rating of 18-mpg city, 25-mpg highway and 20-mpg combined. However, Subaru claims the next generation with the same engine will boast 20-mpg city, 28-mpg highway and 23-mpg combined. But these numbers are just estimates from the automaker at the moment, and they haven't yet been certified by the EPA yet.
The numbers for the four-cylinder and front-wheel drive 200 drivetrains are not yet available, but Chrysler has been promising the sedan gets an estimated 35-mpg highway with the 184-hp and 173-lb-ft Tigershark 2.4-liter four-cylinder engine. We won't know for sure until it's certified, but we'll keep you posted.

Some Jeep Cherokees and Chrysler 200s to get standard stop-start in 2015

Automakers the world over are striving to find ways to make their models more efficient, and Chrysler has a solution for some versions of the 2015 Chrysler 200 and 2015 Jeep Cherokee (2014 model shown). The Tigershark 2.4-liter four-cylinder in the 200 and the 3.2-liter Pentastar V6 in the Cherokee are getting a slight boost later this year thanks to the addition of Chrysler's Engine Stop-Start system as standard equipment. The company predicts modest gains - a three-percent improvement in fuel economy and a three percent reduction in CO2 emissions with the new tech compared to without it. While it's not much, those who sit in traffic a lot may see a difference.
Chrysler's stop/start system uses a high-speed starter motor to restart the vehicle in a claimed a third of a second. It works by detecting when the vehicle comes to a stop and turning off the engine. A more powerful battery maintains all of the model's accessories while it sits. When the driver lets off the brake, the car starts up again to drive away. There is even a button in the cabin to turn the ESS off, if desired.
The Jeep will be the first to receive ESS in the third quarter of this year to coincide with the start of production of the 2015 model-year version. The 200 will follow in the fourth quarter as a rolling change in production.

Detroit 3 to implement delayed unified towing standards for 2015

Car buyers have a responsibility to be well-informed consumers. That's not always a very simple task, but some guidelines are self-evident. If you live in a very snowy climate, you generally know a Ford Mustang or Chevrolet Camaro might not be as viable a vehicle choice as an all-wheel drive Explorer or Traverse, for example. If you want a fuel-efficient car, it's generally a good idea to know the difference between a diesel and a hybrid. But what if it's kind of tough to be an informed consumer? What if the information you need is more difficult to come by, or worse, based on different standards for each vehicle? Well, in that case, you might be a truck shopper.
For years, customers of light-duty pickups have had to suffer through different ratings of towing capacities for each brand. For 2015 model year trucks, though, that will no longer be a problem. According to Automotive News, General Motors, Ford and Chrysler Group have announced that starting with next year's models, a common standard will be used to measure towing capacity. The Detroit Three will join Toyota, which adopted the Society of Automotive Engineers' so-called SAE J2807 standards way back in 2011.
The standard was originally supposed to be in place for MY2013, but concerns that it would lower the overall stated capacity for trucks led Detroit automakers to pass. Ford originally passed, claiming it'd wait until its new F-150 was launched to adopt the new standards, leading GM and Ram to follow suit. Nissan, meanwhile, has said it will adopt the new standards as its vehicles are updated, meaning the company's next-generation Titan should adhere to the same tow ratings as its competitors.