2012 Dodge Challenger R/t Plus on 2040-cars

Auto blog

Chrysler recalling over 280k minivans because airbags may deploy on wrong side

Chrysler has issued a recall for some 2013 Town & Country, Dodge Grand Caravan and Ram C/V Tradesman vans built between May 10, 2012 and June 7, 2013. These vehicles may have a software error that would cause the wrong side (opposite side) airbags to deploy in a crash. With this defect, a left-side impact would cause the right-side airbag to deploy, etc.
The recall affects 281,500 vehicles in total: 224k in the US, 49,300 in Canada, 2,900 in Mexico and 5,300 in other locations. Chrysler will notify owners of effected vehicles, and reflash the offending occupant restraint control module to resolve the issue. Scroll down to read the National Highway Traffic Safety Administration press release.

Chrysler readying 20 Moparized vehicles for SEMA

The Las Vegas Convention Center has plenty of space for aftermarket companies and automakers to show off their wares, and it looks like Chrysler is taking advantage of the spacious floor plan. At next month's SEMA Show, Chrysler will have a full 20 cars from its six brands decked out with Mopar gear.
As a hint of what is to come, Chrysler released a handful of teaser sketches showing glimpses of modified Jeep Cherokee, Ram 1500, Fiat 500L and Chrysler 300 concept vehicles. The automaker will also use the venue to show off a new line of Jeep Performance Parts offered by the all-new Mopar Off-Road Division. In addition to the images, Chrysler also issued a brief press release - posted below - breaking down some of the "industry-first features" that Mopar has offered in recent years.

Dodge Viper recall requires small-handed mechanics

It has been over a year since Chrysler first announced its recall of 3,660 2003-2004 Dodge Vipers because the airbag could suddenly deploy. The repairs are finally beginning, and it appears to be a nightmare for mechanics.
According to the automaker's filing with the National Highway Traffic Safety Administration, the airbag control module can fail, which causes the bag or the seatbelt pre-tensioner to deploy without warning. It took over a year to design the new parts, according to The New York Times. However, Chrysler finally has a new "jumper harness with an in-line diode filter circuit" ready to fix the problem.
The dilemma now moves to the mechanics who have to actually install the part. A 47-step guide from Chrysler explains that the procedure should take about two hours. It's not an easy job, though. Most of the dashboard has to be taken apart, and the instructions include this helpful bit of advice: "Installing the jumper harness and filter box into position is not an easy task. Patience, perseverance, and small hands are required." We wish the best of luck to them. The fix comes just in time for the Vipers to enjoy the summer sun.