1950 Dodge Coronet 3spd Automatic 8 Cyl Possible Rat Rod Street Rod on 2040-cars

Auto blog

Dodge and Jeep recalling 895k SUVs for possibility of headliner fires

Dodge and Jeep are announcing recalls of a total of 895,000 Durango and Grand Cherokee models worldwide from the 2011 through 2014 model years. There's a possibility that the wiring in the sun visor can short circuit and cause a fire. It specifically affects vehicles built between January 5, 2010, and December 11, 2013, and there are approximately 651,000 of them in the US, 45,700 in Canada, 23,000 in Mexico and 175,000 outside of North America.
Screws that fasten the sunvisor to the headliner may pierce wires in the visor, if the part has been removed or serviced, potentially causing a fire risk. If the wires short circuit, they could overheat and potentially combust. The automakers report three injuries caused by this defect, and according to the investigation by the National Highway Traffic Safety Administration, "there may be a total of 52 unique fire incidents."
To fix the problem, Dodge and Jeep will inspect the vehicles for suspect wiring, and all of the models, whether damaged or not, will get a new sun visor spacer with a wire guide to stop the possibility of short circuits. According to the automakers' announcement, "this condition is not present in vehicles which have not had the headliner or vanity mirror serviced." They will notify affected owners, and repairs will begin in August.

Dodge Scat Packages add Mopar performance upgrades in three stages

Dodge has revealed what it calls Scat Package Stage Kits that enhance the performance of the Charger and the Challenger equipped with the 5.7-liter V8, and the Dart equipped with the turbocharged 2.4-liter inline four-cylinder engine. The Scat Packs use Mopar performance parts that also can be bought separately. Most of the upgrades increase engine output, but Dodge somehow manages to not specifically mention the power gains associated with each Scat Pack.
The three Scat Packs offered for the V8-powered cars focus on higher power ratings, and each stage comes complete with a unique engine-management calibration to optimize output. Stage one comes with a cold-air intake and a cat-back exhaust; stage two adds a performance camshaft; and stage three really gives you the goods, adding ported polished cylinder heads and performance headers.
For the Dart, the Scat Packs focus on engine, transmission, chassis and brake upgrades. Stage one will net you a cold-air intake, a short-throw shifter and slotted rotors with performance brake pads; stage two adds a cat-back exhaust system and an engine-management calibration to increase output by taking advantage of premium-octane gasoline; and stage three adds 13-inch vented brake discs up front clamped by four-piston calipers, suspension with adjustable springs and struts and performance front and rear antiroll bars.

Dodge Scat Pack for 5.7L Hemi V8 detailed, priced

Dodge revived the Scat Pack name back in November at the 2013 SEMA show. At the time, though, we were short of details on forthcoming upgrade packages, which were destined to add some oomph to the Challenger, Charger and Dart. We're still waiting to hear about the upgrades to the Dart's 2.4-liter four-pot, but Dodge has gone ahead and released the details on the upgrades to the 5.7-liter Hemi V8 in the Challenger and Charger R/T.
As we detailed in our original post, three different Scat Packs will be available that will allow customers to upgrade their cars without voiding the warranties. Starting with the $2,195 Stage 1 kit, owners will net an extra 18 horsepower and 18 pound-feet of torque thanks to a Mopar-branded cold-air intake, exhaust and ECU ref lash. Stage 1 is also the only package that could be installed outside of a Chrysler-authorized service center without voiding the warranty (a mechanically competent owner could even do it at home, we're told by Dodge). Stage 2 builds on the entry level Scat Pack, and adds performance camshaft kit, which boosts output over the stock 5.7 by up to 30 hp for $1,895. As with the Stage 1, the ECU is tweaked.
For those that want to go whole hog, they can add the Stage 3 for $4,995. The top-tier gets quite serious, adding CNC-ported cylinder heads, as well as high-flow headers and cats. Output over stock is 58 hp and 47 lb-ft of torque. Each kit comes with a pair of badges, just in case owners want a bit of visual flair.