1970 Dodge Coronet R/t Hardtop 2-door 7.2l on 2040-cars
Nineveh, Indiana, United States
|
You are bidding on a 2 owner 1970 Coronet R/T ( yep, a real one). Records I looked up show just a little over 2,100 made in 1970, a one year only body style. I have had this car since 1976 when I bought it from the original owner. Currently in the car is a big block 400 ( I have the matching 440 magnum motor for the car), mild comp cams camshaft (.545 hyd), 516 heads with 906 size valves, (I have the factory 906 heads) 8 3/4 with 4:10 gears and spool, 742 case( I have the factory 489 case posi w/3:55 gears). Has moser axles ( I have the factory axles with the adjusters), MSD 6AL ignition system ( I have the factory points distrib), aluminum radiator( I have the factory one), aluminum water pump housing( i have origanal) 727 tranny with full reverse valve body. The stock shifter has a different plate so that it works with the reverse pattern( have factory plate). Has 3,000 stall converter. Hooker headers with Flow Masters 3 inch exhaust ( I have 2 sets of the factory exhaust manifolds) edelbrock intake with 650 dbl pump holley ( I have the factory intake and carb), I think it's about a 12 gallon fuel cell in trunkl( I have the factory gas tank), duel batteries, holley blue pump. I have raced this car in sportsman class ( runs 13:30's to 13:50's depending on weather) past two years. Car is uncut, no roll bars or frame ties, wanted to keep it as close to factory as possible.All lights, wipers and horn works. I have the factory key set that came with the car. The entire front end, tie rods, ball joints, A arm bushings, ect are PST kit. After buying the car in '76, it was my daily driver. After getting married in '81, didn't drive it much, In the late 80's, I took the factory motor out, (it was still running fine), and disassembled it, to put a different motor in it to go racing, I didn't want to blow up the factory one. In early 90's, I pulled that motor and parked the car inside where it remained until the fall of 2012 when I got it back out and ready for racing again. I have the factory build sheet and the fender tag is still in place (see picture). Along with the car, if you win the bid, there are years of carburetors, tranny coolers, pulleys, kick down linkage, fans, aluminum fuel lines, 2 Pistol grip shifters ( one for B body and one for E body ) another fuel cell, aluminum bug catcher, stainless trim wheel rings different sizes, another 440 short block with steel crank, stock tranny valve body, several pairs of big block heads (452 and 516), intakes, a set of 2.14 intake valves, plus more, This will be a Package deal, no separate sales, I don't need all the parts if I sell the car and need the parts if I don't sell the car. There is a reasonable reserve on it and to give some who might really be interested an idea, last Sept, I was offered $17,000.00 for just the car because as the guy said, he has not seen an untouched car of this year with such a great frame, floor and trunk. It will need new rear quarters as the picture shows, unless you just want to fill them in. This car was originally light green and in late 70's, I had it changed to black ( was a light sanding and painted over original paint). There are places on the car where you can see the original color if you were wanting to paint it back to that color. It also is a factory vinyl top car but that was in bad shape so I took it off, sanded the roof and it is in black primer now. Selling because I have came to the wakening that I am most likely never going to strip this car down and do it back up ( no time, space or the money). I have 2 choices then (1) just keep it, race it till I wreck it or it does rust away (2) sell it to someone who will strip it down and restore it back to it's former factory glory. So, thought would try the second option first. The Mopar Nationals are coming up, so, if you wanted, you could buy this package deal, set yourself up a swap meet booth there to recover a considerable amount of the price and put it back into the car, just a thought. This is AS IS/ WHERE IS purchase, ABSOLUTELY NO WARRANTY IMPLIED OR GIVEN. NO OVER SEAS SALES. CASH ONLY UPON PICK UP. NO DOWN PAYMENTS THEN REST LATER ( bad experience with that) You must at least meet the reserve price to win the car, otherwise, no sale.( thought would add that because a friend had someone that was highest bidder but didn't meet reserve threaten to sue him because he was high bidder and thought that alone entitled him to the item, even though he did not reach the reserve) It is for sale locally also so the bidding maybe cut short. Any questions, murphyphil52@yahoo.com.
|
Dodge Coronet for Sale
1959 dodge cornet
1969 dodge superbee
1970 dodge super bee 4 speed pistol grip sublime green
3 (three day) auction estate sale must sell mopar low reserve estate sale
1967 dodge coronet 440 5.2l
1957 dodge coronet lancer 2dhtAuto Services in Indiana
Westfalls Auto Repair ★★★★★
Trinity Body Shop ★★★★★
Tri-County Collision Center & Towing ★★★★★
Tom O`Brien Chrysler Jeep Dodge Ram-In ★★★★★
TJ`s Auto Salvage ★★★★★
Tire Central and Service Southern Plaza ★★★★★
Auto blog
Dodge bringing revamped Challenger, Charger to Big Apple
Mon, 07 Apr 2014The 2014 New York Auto Show will be a big one for Dodge, as the brand has announced that refreshed versions of the 2015 Challenger and 2015 Charger will debut at the show. This is a particularly big deal for the two-door Challenger which, visually, has remained unchanged since is burst back onto the scene in 2008 and helped reignite the muscle car wars.
As a sort of hint, this announcement was accompanied by the picture you see above - the Super Bee logo in the Challenger's new instrument cluster. According to Dodge, the New York debut of a new "powertrain combination" - possibly with the high-output Hellcat V8 - will leave enthusiasts "abuzz."
As for the Charger, Dodge is promising a full redesign that should be a significant departure from the blunt, angry looks of the current model. At this point, there's no indication that the Challenger's new powertrain could be fitted to the Charger, although considering how mechanically similar these two vehicles have been, it doesn't seem outside the realm of possibility.
NHTSA investigating 110,000 Ram 2500s and 3500s, one death alleged
Fri, 23 May 2014The National Highway Traffic Safety Administration has launched an investigation focusing on 110,000 Dodge Ram 2500 and 3500 pickups from model years 2004 to 2006. One death has already been reported, according to NHTSA, due to a potential fault with the clutch interlocks on manual-transmission versions of the heavy duty pickup.
According to the report, these trucks can be started without depressing the clutch. There have been three reports so far, and as we mentioned above, one very sad incident seems to have resulted in the death of a child.
"One complaint involved an incident that occurred when a child was able to enter the vehicle and start the ignition without depressing the clutch. The vehicle then moved forward striking another child resulting in a fatality," NHTSA said in the investigation bulletin, which you can view below.
Chrysler to accelerate production of 2013 Ram and V6 engines
Fri, 16 Nov 2012Chrysler is adding a third shift at its Warren Truck plant to meet demand for the new 2013 Ram pickup. And with tight supplies of its Pentastar V6, the company is also boosting output at its Mack Engine plant.
The expansions will add 1,250 jobs and are part of a $238 million investment by Chrysler in the Detroit area. Warren's third shift will begin work sometime in the spring, a Chrysler rep told Automotive News. Mack's increased Pentastar production a could include both 3.6 and 3.2-liter engines.
The company says it also plans to invest $40 million in its Trenton Engine plant to allow for production of a 3.2-liter V6 as well as the Tigershark inline-four for the upcoming Jeep Liberty replacement.