1972 Dodge Dart Custom Hot Rod 5.2l on 2040-cars
Knightdale, North Carolina, United States
Fuel Type:GAS
Vehicle Title:Clear
For Sale By:Owner, by Private Treaty
Engine:318, 200 miles on rebuild
Drive Type: automatic, 3 spd
Mileage: 123,000
Exterior Color: White with Red and Dark Blue Blazes
Year: 1972
Interior Color: Black
Make: Dodge
Model: Dart
Power Options: Air Conditioning
Trim: Custom Black Out Grille, emblams removed
This car was a barn find. It has 23,000 on the odometer if I remember right. Front end is solid so it should be 123,000? I put new tires, shocks, and brakes on it to get it home. Then had the motor gone through. I had them add a high torque starter, an Eldebrock 550 carb, Eldebrock Torquer manifold for street pulling. Headers were installed a long with 3" dump tubes inside the frame. They go into low restriction mufflers for a deep mellow tone. Then it went to a custom paint shop for a Soxx and Martin type paint job. It is crystal brilliant white. With a 20" dark blue rally stripe all the way down the top. Then we used the raised side body panels to highlight a burgendy red side stripe. The truck is painted white epoxy with blue and red chips. The grille and rear window trim have been blacked out. Next it went to an interior shop to have the front seat redone. I had them add extra padding around the drivers sides; your Lady can slide over, but you will not slide out during hard running!
Dodge Dart for Sale
- 1973 dodge dart swinger 2 door original muscle car ready complete
- 1971 dodge dart swinger hardtop 2-door 5.2l
- 2013 new silver auto fwd cloth ac cruise traction control! call us today!!!(US $17,998.00)
- Alloy wheels keyless entry factory warranty cd player off lease only(US $15,999.00)
- 2013 dodge dart rallye turbo 6 speed manual factory big screen navigation(US $15,200.00)
- 1964 dodge dart gt clean classic car in great shape!!!!
Auto Services in North Carolina
Walkers Auto Repair ★★★★★
Viking Imports Foreign Car Parts & Accessories Inc ★★★★★
Vans Tire & Automotive ★★★★★
Union Automotive Services Inc ★★★★★
Triangle Service ★★★★★
Todd`s Tire Service Inc ★★★★★
Auto blog
Defiance Dodge Charger, saving Earth from aliens isn't clean work [w/video]
Fri, 08 Feb 2013You'll be forgiven for not having heard about the TV show Defiance - it actually hasn't aired its first episode yet. The new science fiction show about an alien war against Earth in the near future seems like a perfect fit for the SyFy channel, and, apparently one that Dodge saw as a slick marketing opportunity for its Charger sedan.
Here in Chicago, Dodge has given a large corner of its show stand to the Defiance Charger, a car that won't be skipped by any Mad Max fans in attendance at this year's show. The Charger boasts one hell of a gnarly patina under a confusingly welded cage of tube steel, as well as window bars, a grille guard in front, and big, knobby truck tires. There aren't any obvious guns or turrets on the outside of the vehicle, so we can only hope that the characters driving it go well-armed.
Look for the Charger to make its star turn in Defiance when the series premieres on SyFy on April 15 at 9:00 PM EST. Also, there's said to be a Defiance video game in the works, too, so you may get a chance to steer the burly Dodge for yourself. Find a trailer for the show, below, as well.
Chrysler killing off the 200 Convertible, Dodge Avenger
Sun, 23 Feb 2014When Chrysler rolled out the first-generation 200 to replace the Sebring range in 2010, it included replacements for both the sedan and the convertible. The Sebring Coupe, however, was left out of the mix. And now that the second-generation Chrysler 200 is descending upon us, Auburn Hills is paring things down even further. But this time, it's the convertible that reportedly isn't making the cut. Shame, too, since the rendering above shows what could have been quite an attractive droptop.
As our compatriots at Edmunds point out, sales of the convertible model accounted for less than five percent of overall Chrysler 200 sales, and at those numbers, the considerable cost of engineering a new drop-top couldn't be justified. With the Toyota Camry Solara and Volkswagen Eos also gone from the market (well, the VW isn't gone quite yet), the discontinuation of the Chrysler 200 Convertible leaves the affordable convertible segment largely to the sportier likes of the Ford Mustang and Chevy Camaro and smaller European offerings like the Mini Cooper and VW Beetle.
The Chrysler 200 Convertible isn't the only derivative being left behind with the new model: so too is the Dodge Avenger. That will leave a glaring hole in the Dodge lineup, with nothing to bridge the gap between the compact Dart and the larger Charger. Whether the Dodge brand has any plans to replace the Avenger with another model, not to be based on the 200, remains to be seen.
Dodge Scat Pack for 5.7L Hemi V8 detailed, priced
Sat, 05 Apr 2014Dodge revived the Scat Pack name back in November at the 2013 SEMA show. At the time, though, we were short of details on forthcoming upgrade packages, which were destined to add some oomph to the Challenger, Charger and Dart. We're still waiting to hear about the upgrades to the Dart's 2.4-liter four-pot, but Dodge has gone ahead and released the details on the upgrades to the 5.7-liter Hemi V8 in the Challenger and Charger R/T.
As we detailed in our original post, three different Scat Packs will be available that will allow customers to upgrade their cars without voiding the warranties. Starting with the $2,195 Stage 1 kit, owners will net an extra 18 horsepower and 18 pound-feet of torque thanks to a Mopar-branded cold-air intake, exhaust and ECU ref lash. Stage 1 is also the only package that could be installed outside of a Chrysler-authorized service center without voiding the warranty (a mechanically competent owner could even do it at home, we're told by Dodge). Stage 2 builds on the entry level Scat Pack, and adds performance camshaft kit, which boosts output over the stock 5.7 by up to 30 hp for $1,895. As with the Stage 1, the ECU is tweaked.
For those that want to go whole hog, they can add the Stage 3 for $4,995. The top-tier gets quite serious, adding CNC-ported cylinder heads, as well as high-flow headers and cats. Output over stock is 58 hp and 47 lb-ft of torque. Each kit comes with a pair of badges, just in case owners want a bit of visual flair.