1997 Dodge Ram 1500 Ss/t Cummins on 2040-cars
Walla Walla, Washington, United States
|
If you’ve wanted a half ton Cummins here is your chance, all work professionally done. Selling my 97 Ram,This is a 1500 SS/T it has a built twin turbo 12 valve Cummins with a built ATS 47re auto. I’ll start with the body, new paint with cowl hood and 2001 sport grill, bumper and headlights. The color is ford tungsten gray the code is off of a ford GT, paint and body work with the hood and sport parts was $6000. The bed is a Line-X spray in liner $400.The truck has 165 k on it but the only thing that hasn’t been replaced or rebuilt drive train wise is the rear end. The interior has as you can see a roll bar, viper seats, billet B&M shifter and full auto meter gauges including pyrometer, fuel pressure, water temp, 3 boost gauges overall, drive pressure, and primary. It has a pioneer head unit with touch screen 2 rockford amps , a 10” pioneer sub and alpine separates in the doors.The stereo system was about $1500 The engine has been completely rebuilt with the following: ARP main studs 14mm =$225 ARP rod bolts =$175 Arp Head studs= $450 Mahle 286110 pistons and kit from Enterprise =$800 Hamilton head and valve train with custom porting o ringing and assembly =$4100 Hamilton 188 cam with bolt on retainer and tappets =$900 Adjustable pump gear from JD+$340 Benched 215 pump by DPE set a 400cc’s (will flow more with plate slid) =$700 Steed speed manifold=$700 Source auto’s twin kit with 64-70-13 stainless housing over 75-96-1.32 =$3500 Banks twin ram=$550 ATI super damper=$475 Billet aluminum front and side covers=$550 Mishimoto aluminum radiator=$675 BD intercooler=$1150 ATS 47re with triplelock converter, billet input shaft and supporting mods for this application=$4500 Air Dog 200 gph pump=$700 DDP stage 4 injectors=$1100 BD billet flex plate and arp bolts=$470 All machine work and balancing=$1800 Labor to assemble engine= $1000 Alternator,water pump, oil pump and cooler, belts hoses all new Billet freeze plug plates side and rear of block=$130 Full 5” exhaust=$400 I am sure I am forgetting a few things but you get the idea pretty much everything you can do has been done for a reliable strong engine. I have between 500 and 600 miles since completed, this truck runs awesome! I get bored easy so its time for the next project, I will not give my truck away if I cant get what its worth I will keep it. I have over 40k into it, you fellow diesel junkies know how much it takes to build one of these. The front end has been gone through most everything has been replaced shocks all around, ball joints, idler arm, steering arm, all tie rod ends and sleeves, new borgeson upgraded steering box, steering stabilizer, break pads, calipers, wheel bearings and races. Converted to single battery mounted in a drop down box on the frame. Installed a potentiometer in place of the tps. Installed a lock up switch on the floor. Twin turbo Cummins 12 valve steed speed air dog ss/t |
Dodge Ram 1500 for Sale
2010 dodge ram 1500 slt crew 4.7l v8 side steps tow 63k texas direct auto(US $19,980.00)
Ram 1500 quad cab slt good strong hemi 5.7l engine heavy duty work truck 2003(US $7,398.00)
2001 dodge ram 1500 v8 magnum sport(US $2,200.00)
2007 dodge ram quad cab v8 long bed 6-pass bedliner 65k texas direct auto(US $13,980.00)
2013 dodge ram lone star crew hemi rear cam 20's 26k mi texas direct auto(US $28,780.00)
2008 dodge ram lone star quad hemi side steps 20's 58k texas direct auto(US $17,980.00)
Auto Services in Washington
Wind Tech Auto Glass ★★★★★
Wind Tech Auto Glass ★★★★★
West Hills Chrysler Jeep Dodge ★★★★★
Volkswagen Audi Auto Repair ★★★★★
Village Transmission & Auto Clinic ★★★★★
Villa Transmissions & Auto Repair ★★★★★
Auto blog
Dodge Viper GTS-R goes back to old-school livery
Fri, 20 Jun 2014The Dodge Viper may have been around now for over 20 years, but as far as racing achievements go, 2000 was its finest season. That's when it won the Rolex 24 at Daytona, the GTS class trophy at the 24 Hours of Le Mans and its second consecutive title in the American Le Mans Series.
Since then, SRT Motorsports hasn't quite had the same success, withdrawing from Le Mans this year and shedding the Dodge name and its emblematic red and white livery for the SRT badge and a silver snakeskin theme. But now that the Viper is back under the Dodge banner, so too is the racing team returning to its classic livery.
Starting from the six-hour race at Watkins Glen next week, both the No. 91 and No. 93 Viper GTS-Rs will wear the red base color with twin white racing stripes that its more accomplished forebears wore on circuits around the world. And with it, maybe the Viper will return once again to the winner's circle at home and abroad.
Watch this Dodge Viper get clawed to death
Tue, 07 Jan 2014There's a scene in the James Bond movie, Casino Royale, where Daniel Craig's Agent 007 is captured by villain Le Chiffre, played by Mads Mikkelsen. Le Chiffre tortures Bond in a scene that is rather difficult to watch (especially for blokes) and impossible to describe on these digital pages (Google at your own risk). This video is the automotive equivalent of the Casino Royale torture scene.
It shows a Dodge Viper - a late, first-generation GTS judging by the center-exit exhausts - getting assaulted by a giant piece of heavy equipment. The large claw shows no mercy on the V10-powered sports car, rending its muscular curves into pieces and then running it over, just for good measure. It's a painful video to watch (and hear!), made worse because we don't know what the Viper did to deserve such a fate. About a third of the way through the video, the cameraman indicates that the man with the claw is a new operator from Chrysler, and it appears there may be some fire damage, but beyond that, we don't have much to go on.
Scroll down for the video but be warned, it isn't for the faint of heart.
Chrysler investing $20M in Toledo plant to support 9-speed auto production
Sun, 28 Apr 2013In 2011, Chrysler announced a $72-million investment in its Toledo Machining Plant to modernize production of the eight- and nine-speed torque-converters for automatic transmissions made there. That upgrade work won't be finished until Q3 of this year, but Chrysler has already announced a further $19.6-million investment to increase production capacity for the nine-speeders.
The extra units will be necessary because the nine-speed transmission they'll be mated to is going into three popular models: it will debut on the 2014 Jeep Cherokee, then go into the Chrysler 200 and Dodge Dart. The company predicted that this year alone it would sell 200,000 units equipped with the nine-speed tranny, and it is spending some $374 million in addition to the investment in Toledo to upgrade production capacity for it.
The work attached to this new investment won't begin until Q3 of 2014, and it will be finished by the end of that year. There's a press release below with all the details.