1993 Ford Aerostar Automatic 6 Cylinder No Reserve on 2040-cars

Auto blog

Ford S-Max Concept proves minivans aren't always minivans [w/video]

Ford's latest don't-call-it-a-minivan is called the S-Max Concept, and it's a looker. As you can see, the conceptual overgrown hatch makes good use of Ford's latest design language, especially at the very front of the S-Max, which bears a striking resemblance to production models that include the Focus, C-Max and Fusion.
Powering the S-Max Concept is a 1.5-liter EcoBoost engine, and while Ford doesn't actually list power figures for the concept, previous estimates put the mill at 133 kW of power (about 178 horsepower) and 240 Nm of torque (about 177 pound-feet). Inside, there's room for seven passengers and at least some of their luggage.
As you'd expect, the S-Max is loaded up with all of Ford's latest infotainment technology, including Sync and MyFordTouch. More interestingly, there are also onboard heart and blood glucose monitors that we doubt will be seeing the light of production anytime soon. On that topic, don't expect to see any S-Max-shaped vehicles hitting the US market from Ford, either. Scroll down below for the press release, but not before checking out the high-res image gallery above.

Ford recalling 126,000 Fusions and Milans over wheel separation concern

Ford has announced a recall of certain Ford Fusion and Mercury Milan vehicles after an investigation by the National Highway Traffic Safety Administration. A total of 128,616 2010 and 2011 models equipped with steel wheels may have been manufactured with wheel studs that could crack and split over time. If that happens, the vehicle may experience a wheel separation.
According to The Detroit News, the company is aware of a total of 30 wheel separation incidents, one of which occurred on the front of the vehicle. Even so, no injuries have been reported as a result of the defect.
The problem apparently stems from the fact that the mounting pads on the vehicles' steel wheels may have been faulty from the factory. In addition, the wheel mounting face on rear disc brakes may not have been installed properly. Ford will inspect the rear disc face and replace them as necessary. In addition, the company will replace all of the vehicle's wheel studs free of charge. Head to the NHTSA website for more information, and click past the jump to view the full recall notice.

Ford debuts Fusion NASCAR racer that edges closer to stock [w/video]

The sixth-generation NASCAR Sprint Cup racecar, which will make its competition debut at the 2013 Daytona 500 this weekend, marks the closest thing to a "stock car" that the sport has seen in more than 20 years. No longer using just stickers to distinguish the different brands, the image above shows the lengths NASCAR and automakers went in order to create a racecar design that more closely resembles the individual cars they represent.
Ford, one of the more open and vocal OEMs regarding the Gen6 car's development, is giving us a closer look at its racing version of the Fusion with a pretty revealing side-by-side comparison with last years' racer (click above for an expanded view). Aside from the more realistic front end and production-like body lines, the overall shape, dimensions and proportions have also been designed to give the racecar a more stock appearance. Most of the new racer was designed by the Ford Design Center, which the automaker says was the first time it has been so involved in the design process since the 1960s. Of course, one area the Sprint Cup Fusion really differs from the production Fusion is its Ford Racing 5.8-liter V8 producing around 850 hp. Can you say Fusion SVT?
Scroll down for a quick video from Ford Racing showing a production Fusion morph into a Cup car.