1966 Ford Bronco Custom Buggy on 2040-cars
Gerton, North Carolina, United States
Body Type:Custom
Engine:331
Vehicle Title:Clear
Fuel Type:Gasoline
For Sale By:Private Seller
Interior Color: Gray/Aluminum
Make: Ford
Number of Cylinders: 8
Model: Bronco
Trim: Custom
Drive Type: 4wd
Options: 4-Wheel Drive, Convertible
Mileage: 300
Sub Model: One of a kind
Exterior Color: Red
Looking for something different? Truly one of one!! Custom hand built Bronco buggy-tagged(check your local requirements), titled (home built fully legit NC Title-vin # listed was assigned by the inspector and state-thus the non standard "U15.........." Vin) and insured
I will let the pics do most of the talking. Below is a specs. listing.
*Drivetrain- Balanced and Blueprinted 331 Ford 5.0 based engine-only a 30 over-started ith a 70k donor 5.0 from a '93 GT, custom grind Isky cam- idle to 5k, great off idle performance, Ford racing 1.6 roller rockers, AFR 185 al. heads, ARP bolts, Trick Flow upper and lowers, 70TB, 75 MA, 30lb inj, aeromotive fuel rails, Walboro fuel pump, MSD 6al box and Coil, Painless Performance 5.0 harness, Custom tuned (on chassis dyno) FoMoCo computer, royal purple oil and E3 plugs-Ford Racing 9mm wires, full set of March Pulleys for bling
Ron Davis Al. radiator and matching fans
C4(Automatic Trans) custom built with reverse manual valve body
Atlas II t-case, 4.3:1 with 32spline upgrade
*Suspension- triangulated 4link front and rear, fox 2.5 air shocks
*Axles, Currie housings, truHigh9 centers F450 front knuckles, modified and reinforced for high steer arms on front, rear is trussed and beefed. Custom skidplate under the rig and dif cover on front. 4.88 Ring and pinion front and rear- Moser shafts and Longfield Ujoints, detroit lockers front and rear, SpiderTrax hub fuses front and rear
*Steering- PSC double ended ram, full hydro, matching PSC Pump and reservoir
*Wilwood Disc Brakes all four corners, willwood dual master cylinder and pedal
*Lokar gas pedal
*Interior- Custom '66 Dash with working stock gauges(now autometer) no speedo, correct '66 knobs controlling the lights, turn signals, winch control and one extra to match up
Aluminum floors and kick panels-beside the motor to keep dirt out etc,,,, Beard Ultra seats and Simpson Harness, Lokar shifter and billet knobs on the Atlas shifter to match
two matching tool boxes behind the seat-one holds the computer and fuse panel, the other is used for recovery gear
Large gear box behind the seats with cooler rack. Spare tire holder for full size 39" Red Label BFG Krawler.
*1966 Ford Bronco Horn Button on custom steering wheel(pull off/quick release steering wheel)
*5 BFG Red Label Krawlers on custom "slot style" Al. Wheels Staun internal beadlocks on all 5
***Body-literally 100's of hours were spent to make the fiberglass body look like a real bronco. Stock bronco metal was cut, sectioned, and modified and then a mold was made. The skins were the result.
Cage is inch and 3/4 DOM with some 1" and Chromo rock skis on the lower rocker
*Warn 8000i winch with syn. rope
*Rig is 54" wide approx, and 106wb. It weighs 3640 full of fuel with no driver
***Less than 300 miles since completion in 2011
Much more-serious buyers, feel free to call with questions- 828 two seven three 47 six nine
big thanks to Twisted Customs for an outstanding build www.twistedcustoms.biz
I have 100 percent feedback and intend to keep it that way. I have sold broncos and trucks over the years and have never had a problem
This rig is sitting in my garage and is ready to go
Ford Bronco for Sale
1970 ford bronco. customized. 5.0l mustang eng. rhino liner. huge wheels.(US $10,500.00)
1994 bronco 70k actual miles! california truck_5.8 liter_tow package! leather!
1969 ford bronco 302ci, 3 speed standard transmission, 4x4(US $8,798.00)
1974 bronco 4x4 uncut with new paint, new 2" lift kit - very nice!
1970 ford bronco--no reserve
1996 ford bronco eddie bauer(US $6,999.99)
Auto Services in North Carolina
Westside Motors ★★★★★
VIP Car Service ★★★★★
Vann York Toyota Scion ★★★★★
Skip`s Volkswagen Service ★★★★★
Sharky`s Auto Glass ★★★★★
Randy`s Automotive Repair ★★★★★
Auto blog
Watch this Ford F-150 SVT Raptor fly like an eagle [UPDATE]
Mon, 04 Feb 2013The Ford F-150 SVT Raptor is a very capable truck right out of the box, but "capable" has never translated into "invincible." Just ask the owner of the machine in this video. In it, the driver gets frisky with an aggressive jump with plenty of speed on his hands. The result is enough air to make Vaughn Gittin Jr. blush. As always, it's not the launch that's painful, but the re-entry. Gravity eventually asserts its dominance over the $43,630 pickup in a big way, and when it comes crashing down, it does so with a vengeance.
The impact was hard enough to set off both the alarm and multiple airbags inside the cabin. It's unclear if anyone was injured in the stunt, but we certainly wouldn't be surprised to hear that was the case. You can check out the stunt in the video below, and remember, when in doubt, back out of the throttle. Be warned, there may be some explicit/NSFW language in the clip.
UPDATE: Second video added with an even better look at the jump added below.
2015 Ford Mustang production to begin on July 14? Not quite, says Ford
Thu, 10 Jul 2014Mustang6g.com believes that it has unlocked start date for 2015 Ford Mustang production citing a Ford dealer communiqué. According to the report, job one on the 2015 hardtop will allegedly start in just a few days, on July 14, although units that are known as "OK to Buy" won't enter production until September 9. The cars built between those dates are most likely final pre-production cars for the executive test fleet, and will likely include the cars we'll be driving at the media launch.
Sun worshippers, meanwhile, would seem to have a longer wait. Job one on the droptop supposedly isn't slated to start until September 14, with production models starting on October 27. As is the case with the hardtop, these final pre-pros are for the execs and media to test, while actual dealer orders will come from vehicles made after the October date.
After speaking to Ford, though, we wouldn't put a great deal of stock in those dates as reported. We reached out to Said Deep, Ford's North American Product Communications Manager.
Chip Ganassi Racing switches to the Ford EcoBoost-powered Riley Daytona Prototype
Wed, 06 Nov 2013Chip Ganassi Racing with Felix Sabates (CGRFS) announced yesterday at Ford's SEMA press conference that it will field a Ford-Riley Daytona Prototype with the 3.5-liter EcoBoost V6 in the 2014 United SportsCar Championship (USCC). CGRFS is the second team to commit to the new Ford-Riley car, behind Michael Shank Racing (which has already used the racecar to break a 26-year-old top-speed record at Daytona International Speedway).
"Over the last 10 seasons we have been able to experience a great deal of success in Grand-Am," Chip Ganassi says, "and now with the dawn of the new United SportsCar Championship we feel that Ford power will be a key ingredient to writing the next chapter of our sports car program."
In the last Grand-Am season, CGRFS raced a BMW-Riley Daytona Prototype. The team has won seven Daytona Prototype championships, all in the past ten years. Scott Pruett and Memo Rojas return as the team's prototype co-drivers, and will attend their maiden race in the Ford-Riley at the Rolex 24 at Daytona in January.