1973 Ford Bronco 302 V8 Auto! 4x4 on 2040-cars

Auto blog

Hot sales have Detroit automakers shortening summer shutdowns

Back in May, there was speculation that the Detroit Three automakers would maintain or perhaps even extend their traditional summer shutdowns, mostly due to a bitingly cold winter that saw below-freezing temperatures infiltrate the southernmost reaches of the US, putting a chill on auto sales. Now, though, the numbers are in, and thanks to some promising sales figures, it looks like some domestic line workers are going to be working clear through July, in some cases.
According to Automotive News, Ford has slashed its traditional two-week hiatus for factory workers in half at four of its plants, while both Chrysler and General Motors will keep factories running nonstop (two plants in Chrysler's case and a third of GM's factories).
This is, as we said, thanks to some positive numbers. Chief among those is the Seasonal Adjusted Annual Rate, which was at an eight-year high of 17 million units. Individual figures were less promising. GM, embroiled in its recall scandal, still saw a one-percent increase while Ford dropped six percent in year-over-year sales. Chrysler was the big winner, though, with a nine-percent jump in June.

Ford cleans up painting process with cameras

Knowing how the bacon gets made rarely entices us and, in the same vein, the same usually goes for knowing about how new cars get painted. But in both instances, however, quality - or a lack thereof - is instantly obvious. In terms of the latter, Ford is showing off its new paint quality process with 3D Dirt Detection Technology to find imperfections in vehicle paint more easily and more quickly.
This process - being performed on the F-150 SVT Raptor above - uses 16 computer-controlled cameras to create a three-dimensional model (inset) of the vehicle to detect flaws in the paint including dirt particles, which can then be buffed out manually. Ford says this new technology cuts down on time spent looking for paint flaws and gives workers more time to correct those that are discovered.
Currently, Ford only uses its 3D Dirt Detection Technology system at three factories (the Dearborn, MI facility, along with those in Louisville, Kentucky and Valencia, Spain), but it will soon spread to five more plants in North America. Ford has released a video and press release for this innovative and unexpectedly interesting process, both of which are posted below.

2014 Ford Fusion to get 1.5L EcoBoost three-cylinder?

Just one year after launching the all-new 2013 Fusion, Ford is reportedly set to alter the sedan's powertrain lineup with the addition of a new 1.5-liter turbocharged three-cylinder EcoBoost engine. A member of Blue Oval Forums apparently got their hands on the ordering guide for the 2014 model year Fusion, and this 1.5-liter mill is set to be introduced with late availability.
This lines up with other news about the Chinese-market Mondeo being offered with a new 1.5-liter EcoBoost - a derivative of the 1.0-liter triple that will come to North America under the hood of the Fiesta (note: the 1.0 is also offered in the current Euro-spec Mondeo). In the Chinese application, the larger three-pot engine produces 177 horsepower and 177 pound-feet of torque, which is very close to the current 1.6-liter inline-four's output numbers of 178 hp and 184 lb-ft.
What's interesting, however, is that the 1.6-liter engine will reportedly still be offered in the Fusion, but only with the six-speed manual transmission. The smaller 1.5-liter EcoBoost will only be mated to a six-speed SelectShift automatic, and will feature start/stop. This means that while the 1.5 is slightly down on power compared to the 1.6, it could easily improve fuel economy numbers, allowing the Fusion to regain the title of having the best mileage in the segment, likely besting the 38 miles per gallon of the Nissan Altima. Currently, the Fusion 1.6 is rated at 23 mpg city and 36 mpg highway.