2001 Ford E-450 Econoline Super Duty Custom Cutaway Van 2-door 7.3l on 2040-cars
Sumner, Iowa, United States
Body Type:Cutaway Van
Engine:7.3L 445Cu. In. V8 DIESEL OHV Turbocharged
Vehicle Title:Clear
Fuel Type:Diesel
For Sale By:Dealer
Number of Cylinders: 8
Make: Ford
Model: E-450 Econoline Super Duty
Trim: Custom Cutaway Van 2-Door
Warranty: Vehicle does NOT have an existing warranty
Drive Type: RWD
Safety Features: Anti-Lock Brakes
Mileage: 122,281
Power Options: Air Conditioning, Cruise Control, Power Windows
Sub Model: Super Duty E450 XLT
Exterior Color: White
Interior Color: Gray
2001 7.3 Turbo Diesel Powerstroke 7.3 Cutaway chassis. Good shape except where someone opened the driver door in the wind & bent the door as seen in the pictures, door works fine except of the cosmetic damage & it open a little more than it is supposed to. Starts a little hard cold as it might have a couple glow plugs burned out. Runs great on the road & the transmission seems to be solid also. Starts good warm, so the compression & the injectors seem to be good. Has stainless simulators. The frt tires are Firestone LRE Transforce HT That are approximately 65%, The Rear Are Firestone HT LRE that Are not so Good(10-20%). Interior is 90% good as it is a little dirty. Temporary taillights are available & also temporary license to drive it home could also be available.It is capped on the back presently with plywood. The ambulance body was removed to update the chassis with a new one. Rear caps for the back of the cab are also available & can be bought if you wish after the sale of the chassis. The Cab to Center of rear axle is 100" & The back of the cab to rear of frame is 164". The A/C Lines are not capped from the box removal & need to be capped before recharging A/C. Thanks For Looking!!!!!!!!!!!!!!!!
Ford E-Series Van for Sale
- 2009 ford e-series van(US $12,799.00)
- 1993 ford e350 7.3l diesel 9 passenger 6 captain chairs & bench great shape(US $4,900.00)
- 2012 ford e250 cargo van,v8/full power/15000 miles/xl decor grp/
- 2012 ford e350 - 12 passenger van - wholesale price(US $17,990.00)
- 2012 ford econoline wagon 15 passeneger xlt club wagon black nav loaded
- 2008 ford e-350 xlt superduty advanced trac rsc 12 passenger
Auto Services in Iowa
Pleasant Hill Auto Body ★★★★★
Lea Mobile Glass Inc ★★★★★
Hamilton Radiator ★★★★★
Four Guys Auto Sales & Body Repair ★★★★★
Dusty`s Tire ★★★★★
Country Auto INC ★★★★★
Auto blog
2014 Ford Fusion to get 1.5L EcoBoost three-cylinder?
Tue, 09 Apr 2013Just one year after launching the all-new 2013 Fusion, Ford is reportedly set to alter the sedan's powertrain lineup with the addition of a new 1.5-liter turbocharged three-cylinder EcoBoost engine. A member of Blue Oval Forums apparently got their hands on the ordering guide for the 2014 model year Fusion, and this 1.5-liter mill is set to be introduced with late availability.
This lines up with other news about the Chinese-market Mondeo being offered with a new 1.5-liter EcoBoost - a derivative of the 1.0-liter triple that will come to North America under the hood of the Fiesta (note: the 1.0 is also offered in the current Euro-spec Mondeo). In the Chinese application, the larger three-pot engine produces 177 horsepower and 177 pound-feet of torque, which is very close to the current 1.6-liter inline-four's output numbers of 178 hp and 184 lb-ft.
What's interesting, however, is that the 1.6-liter engine will reportedly still be offered in the Fusion, but only with the six-speed manual transmission. The smaller 1.5-liter EcoBoost will only be mated to a six-speed SelectShift automatic, and will feature start/stop. This means that while the 1.5 is slightly down on power compared to the 1.6, it could easily improve fuel economy numbers, allowing the Fusion to regain the title of having the best mileage in the segment, likely besting the 38 miles per gallon of the Nissan Altima. Currently, the Fusion 1.6 is rated at 23 mpg city and 36 mpg highway.
Ford 3D-printing Mustang out of chocolate and candy for Valentine's Day
Thu, 13 Feb 2014Is your beloved in love with the new 2015 Ford Mustang? Do they like chocolate (that's a trick question - everyone likes chocolate)? Are they a bit of a futurist? Then this Hallmark holiday, you need to get them this Ford Mustang, 3D-printed in sweet, delicious chocolate.
Ford is teaming with 3D Systems' Sugar Lab in LA to produce the super-accurate pony car confections in both chocolate and sugar candy varieties. The process kicked off with a CAD rendering of the 2015 Mustang, which was then programmed into the 3D printer. After a bit of work from the machine, a four-inch long, two-inch tall Mustang was the result. Why the tieup with 3D Systems, though?
"We wanted to create something fun to show that while 3D printing made these edible Mustangs, manufacturing-level 3D printing was used in the development of Ford's all-new sports car," said Paul Susalla, Ford's supervisor of 3D printing.
Last 2014 Ford Shelby GT500 Convertible nets $500k for charity at Barrett-Jackson [w/video]
Tue, 13 Aug 2013The last 2014 Ford Shelby GT500 Convertible was sold on Saturday at a Barrett-Jackson auction in Reno, Nevada, for $500,000. Ford donated the Mustang to be auctioned for charity, and all of the money is going to the Brain Injury Association of America.
Parnelli Jones, winner of the 1963 Indianapolis 500, was there on behalf of the BIAA with his son Page, who suffered a brain injury in a sprint car crash in 1994. The bidding increased quickly, reaching $500k in no time, spreading a bit more hope to people who live with brain injuries.
The winning bidder will be able to choose the GT500's exterior, interior and stripe colors, and is scheduled to receive the car, signed by Parnelli Jones in appreciation for the donation, by the end of 2013. Watch the video below to see the auction-block action.