2014 Ford F150 on 2040-cars

Auto blog

Ford F-Series Super Duty prototype reduced to smoldering mess of aluminum and steel [UPDATE]

The most important bit of information you need to know after looking through our high-res gallery of images depicting a prototype 2016 Ford F-Series Super Duty pickup truck burning to the ground is that nobody was hurt. There were two engineers inside the vehicle when it caught fire, and both exited to safety.
That's the good news. The bad news is that the truck, which appears to have been testing in Death Valley, appears to be a total loss, minus, of course, whatever information Ford can glean from the conflagration - particularly tracing it back to its root cause. Besides that, we're also expecting the body of the next Super Duty to be hewn from aluminum, as is the case with its smaller brother, the brand-new F-150. Note the little aluminum droppings littering the roadway as apparent proof of that.
Our spy photographers report that it took just 21 minutes for the F-Series Super Duty to burn completely to the ground. The fire appears to have started in the driver-side front wheel well, spreading to engulf the entire front end in three minutes. We can't confirm the source of the blaze, but we're curious if the car's black vinyl cladding, meant to obscure the secrets within, contributed to the fire.

2016 Ford Focus RS mule spotted on US soil

Okay Ford, this is what we like to see. One of our intrepid spy photographers has captured a vehicle that we weren't even sure would see the light of day - the next Focus RS. While this is pretty clearly a mule based on the current Focus ST, as our spy points out, there are a number of giveaways about this hot hatch's true nature.
Indication number one that all is not right with this Focus is the heavily camo'd front fascia, which has been completely reconfigured for duty on the RS. It boasts significantly larger grilles that are meant to accommodate what is likely the 2.3-liter, turbocharged four-cylinder that's destined for the 2015 Ford Mustang. Considering that, then, we can expect around 300 horsepower and 300 pound-feet of torque from the hottest of Foci, although it's entirely possible that the production model could climb even higher, to around 330 hp.
The front fascia tweaks are complemented in the back by a modified rear bumper, which fails at hiding a pair of exhaust tips quite unlike the standard Focus ST's center-exit exhaust. Other obvious changes include the wheel/tire/brake package on this particular car. Larger 19-inch wheels are shod in super-sticky Michelin Pilot Super Sport tires in 235/35/19 while the brakes feature what we think are four-piston calipers, possibly from Brembo, up front.

How Ford plans to handle insurance and repair questions surrounding new aluminum-bodied F-150

Building a car out of aluminum has a number of benefits - the lighter weight allows the vehicle to be more agile, more fuel efficient, make better use of its power and be more resistant to dings and dents. The downside to the advanced construction, though, is that repairs are both challenging and expensive. That's troubling for the new, aluminum-bodied Ford F-150, because it's kind of made a name for itself as a rugged, durable work vehicle.
How will the legions of Ford buyers cope when it comes time to insure and repair their new trucks? Well, according to Ford, it's expecting a ten-percent jump in insurance costs for the aluminum-bodied F-150, although Ford's truck marketing manager, Doug Scott, was quick to point out that the F-150 is generally cheaper to insure than its competition from Ram and General Motors. "At the end of the day, that's sort of a wash," Scott told Automotive News at last week's Detroit Auto Show. "We've spent a lot of time and feel very comfortable that that's not going to be an inhibitor."
The other issue facing Ford is the distinct lack of body shops that have the training or equipment to repair aluminum-bodied vehicles. AN cites an estimate from the Automotive Service Association claiming that of the 30,000 independent body shops in the US, less than 10 percent are able to work on aluminum.