Ford F350 Lariat Huge Lifted Deisel Custom Heavily Modded on 2040-cars
Princeton, Wisconsin, United States
Up for sale is a 2004 Ford f350 Superduty Powerstroke
diesel. This thing is huge! Turns heads everywhere I go. It is an extended cab
(4 door) long box (8ft. box). Has the 6.0L turbo diesel engine with 154,xxx
miles on it, a 5-speed automatic Torqueshift transmission and 4 wheel drive
(4x4). It is the Lariat package so it
has tan leather interior, lumbar support
seats, power driver’s seat, power locks, power windows, power sliding rear
window, power heated telescoping mirrors, center counsel, tilt wheel, cruise,
ice cold A/C, and overhead data display. It has the 4x4 on the floor so you
know it’s in compared to the dash switch and has the manual locking hubs which
is also nice and reliable. Apparently it has a "manufacturer buyback" title, which i didn't even know. I know the Ford 6.0 engines had a lot of problems when they came out so I'm assuming that's why. There isn't anything else it could be as far as i know, so it does have that on the title. Aftermarket interior items are blue L.E.D. dome light, Kenwood in dash dvd player with usb and ipod hookups, Cobra 29LTD cb radio, tinted windows (%25), front window drop, and quad pillar gauge with Autometer ultralight gauges (trans temp, EGT temp, boost, and fuel pressure). It’s got an aftermarket brake controller for trailers already wired in. It also has a Viper remote start/security system with a 2-way remote that works great I love that feature! Exterior has a 13” lift in the rear and a 6” lift up front
running on 37” Nitto Mudgrapplers. It has smoked out cab lights and tail
lights, with crystal markers up front, Piaa headlight and fog light bulbs,
recon L.E.D. signal strips under the doors, and a fire and ice led bar in the
back. It has N’fab running bars, Pypes 6” exhaust stacks, a custom painted
black grill and black “in box” tool box. Right before winter I had the whole
frame sand blasted and painted with por 15, which is really hard and rust proof
paint and looks amazing. Everything under the truck was gone through, blasted
and painted. It has all new Spicer u-joints front to back, every one of them.
All new heavy duty front ball joints, and one tie rod end. The axels front and
back have all new seals and new Amsoil gear oil in them. Transmission and
engine also run Amsoil and were changed at the same time, 1000 miles ago at the
most. The front driveshaft is a custom heavy duty one made by Driveshaft
Specialists of Texas that was put on last year. It also has heavy duty
adjustable rear traction bars and a dual front steering stabilizer to keep it
tracking straight. I will throw in my custom #10,000 16” drop hitch so you can
pull a trailer too, you will need it! As far as performance, there is a lot done to this truck and
puts down the numbers prove it. It has a K&N cold air intake, 4” downpipe
to 5” to 6” stacks for exhaust. I’m running River City 190cc injectors with a Garrett 68mm vgt turbo, Airdog 150 lift pump,
Alligator Diesel stainless steel braided regulated return fuel system with a
Sinister Diesel fuel tank sump. Obviously with all this it has ARP head studs,
oem gaskets, Sinister EGR delete, new oil cooler and screen, new icp and ipr
valve and sensors, as well as a Sinister Diesel coolant filter system. I am
running a custom tune from Innovative Diesel on my SCT tuner that also has the
custom race tune on it that will be included with the truck. I took it to the dyno yesterday and it put down 544 Rwhp and
973Ft.Lbs. of torque. This thing absolutely rips and sounds better than any
truck I’ve ever heard. Sounds like a jet when it’s just sitting there idling it’s
crazy. There are absolutely zero issues with the way this truck runs and
drives. It is runs super strong and handles like a car when going down the
road, you will not be disappointed! The only issues with the beast are cosmetic. The chrome rims are peeling in places, the paint in a few small spots is cracked, and the bedliner around the bottom is wearing thin. I do have a half gallon left of that i think to touch it up that will go with the truck. The box has
some big dents in the passanger side and is starting to rust around the wheel
well on the other side. It also has holes in the bed from a 5th
wheel it and other tool boxes possibly or something like that. You may just
want to replace the entire box, that would be the cheapest route I figured.
Also it needs new tires; the ones on it are shot. Other than that the only
thing this rig needs is a new owner! Also considering trades on a newer Acura Tl, Tsx or
something similar. Also looking for a Honda Cbr600RR bike. You can get ahold of me by texting Derek at 920-299-2083 or
send me a message on here and I will get back to you as soon as possible.
Thanks For looking! On Mar-13-14 at 08:31:00 PDT, seller added the following information: I pulled the truck a few times last year, this is exactly how it is set up now. Proof that it runs strong and sounds awesome! |
Ford F-350 for Sale
- 2007 ford f350 w/ enclosed service body
- 2012 ford f-350 lariat crew fx4 4x4 longbed nav 38k mi texas direct auto(US $45,980.00)
- Lifted ford f-350 lariat 7.3 diesel!!!!!
- 2012 ford f350 king ranch lariat 4x4 navigation bluetooth sat radio
- 2008 ford f-350 xl exteneded cab 6.4l diesel 2wd chassis no reserve
- No reserve 2004 ford f350 diesel crew xlt 4x4 short bed az clean no rust!!!!!!!!
Auto Services in Wisconsin
Wendt`s Auto Body ★★★★★
VIP Auto Sales ★★★★★
Stags Repair ★★★★★
South St Paul Automotive ★★★★★
Silver Spring Collision Center ★★★★★
Showroom Auto Detailing ★★★★★
Auto blog
William Clay Ford Sr. dead at 88
Sun, 09 Mar 2014William Clay Ford, retired vice chairman of Ford Motor Company and the last surviving grandchild of company founder Henry Ford, died this morning after a bout with pneumonia. He was 88.
Ford spent 57 years with his grandfather's company, joining the board of directors in 1948 before graduating from college. Ford also held a position as chairman of the design committee, as well as the chairman of the executive committee and vice chairman of the Board of Directors during his tenure with the company. In a 2013 Detroit Free Press story, retired CFO Allan Gilmour said Ford had an eye for design, and was once able to pick out when a fiberglass model of a Ford Contour was asymmetrical, off by an inch on one side. He retired and assumed the position of director emeritus in 2005.
"My father was a great business leader and humanitarian who dedicated his life to the company and the community," said Bill Ford, Jr., Ford's current executive chairman. "He also was a wonderful family man, a loving husband, father, grandfather and great-grandfather. He will be greatly missed by everyone who knew him, yet he will continue to inspire us all."
Your official Ford Transit specs are here, $29,565* to start
Wed, 04 Jun 2014Ford has released the full list of pricing and specs on its new Transit, the replacement for the long-lived E-Series cargo van. Prices are set to start at $29,565 and can increase rapidly from there, depending on length, engine and wheelbase, among other options.
Let's talk first about those new engines. The base is the familiar 3.7-liter, naturally aspirated V6. It boasts 275 horsepower and 260 pound-feet of torque and can return up to 14 miles per gallon in the city and 19 mpg on the highway. This engine can also be adapted to run on LPG or compressed natural gas. Of course, there are better alternatives, for a price, the first of which is Ford's well-received, 3.5-liter EcoBoost V6. It packs 310 hp and a best-in-class 400 lb-ft of torque (available at just 2,500 rpm) while matching the naturally aspirated engine in both city and highway fuel economy.
Then, there's the diesel. With a 3.2-liter, five-cylinder diesel mill at its disposal, the Transit generates 350 lb-ft between 1,500 and 2,500 rpm, along with 185 hp. This engine hasn't been rated by the EPA, although we'd be really, really surprised if it didn't handily best either of the gas-powered engines in fuel efficiency. A six-speed automatic is standard, regardless of engine.
Toyota fears supplier pressure in Australia with GM pull out
Wed, 11 Dec 2013With Ford and General Motors both announcing an end to production in Australia, the country's auto industry is in a bad way. With the exit of two big players, there's increased concern that a third Australian manufacturer, Toyota, will be forced out, as well.
"We are saddened to learn of GM Holden's decision. This will place unprecedented pressure on the local supplier network and our ability to build cars in Australia," Toyota Australia said in a statement. The GM closure of Holden production will be the direct end to 2,900 jobs, but will also force a dramatic reduction in the size of the country's supplier network, as there will simply be fewer cars to build.
In the same statement, Toyota Australia said it would work with suppliers and local government to figure out whether continuing production Down Under was even feasible. According to Automotive News, a representative for the Australian Manufacturing Workers' Union told reporters it was "highly likely" that Toyota would also close up shop within the next few years.