2011 Ford Focus Se on 2040-cars

Auto blog

NHTSA closes Ford F-150 EcoBoost acceleration probe

Typically when we report on the findings of an investigation from the National Highway Traffic Safety Administration, it's because the government body has discovered a safety issue and prescribed a recall. In this case, however, NHTSA has closed an investigation into a reported performance deficit without ever getting to the recall stage.
The issue revolves around the Ford F-150 - specifically those equipped with the 3.5-liter EcoBoost engine - of which some 360,000 were built in the 2011, 2012 and 2013 model years. After receiving an initial 95 complaints, NHTSA opened an investigation last May - almost a year ago - into the reported issue of reduced engine power under hard acceleration. The agency has since received a total of 525 such complaints, and Ford itself reported receiving over 4,000.
Together, NHTSA and Ford determined that the problem resulted from cylinders misfiring, an issue itself stemming from water getting into the charge air cooler (CAC) mated to the turbochargers. In particularly humid or rainy conditions, water was found to get into the CAC, causing some of the cylinders to misfire, which in turn triggered the ECU to disable those cylinders in order to protect the catalytic converter from damage.

How Ford's light lab keeps the sun shining on the new Mustang just right [w/video]

Anyone who's bought one of those old school metal shift knobs knows they're really cool until they sit in a parking lot in the sun for a few hours. Then they're not cool at all. Likewise, features such as the aluminum dash on the 2015 Ford Mustang can be all kinds of neat right up until the sun hits it just the right way and sends shards of blinding light through the cabin. The Ford Visual Performance and Evaluation Lab is where engineers figure out how to make sure that doesn't happen.
Cars like said Mustang are parked inside the 30-foot reflecting dome under 6,000 watts of lights that can mimic the sun at any time of day and in any weather condition. Engineers can then spend cold, overcast days inside, testing for interior legibility, glare and reflections on every interior and exterior surface as if it were bright and sunny. They can also learn how a car's sheetmetal and colors will look out of doors, all year round.
Ford showed off the lighting lab without the music and interviews three years ago when the Explorer was being prepared. You can watch it at work again in the video below, and read about it in the press release below that.

Ford partnering with MIT, Stanford on autonomous vehicle research

Ask any car engineer what's the biggest variable in achieving fuel economy targets, and he'll tell you "the driver." If one human can't understand human driving behavior enough to be certain about an innocuous number like miles per gallon, how is an autonomous car supposed to figure out what hundreds of other drivers are going to do in the course of a day? Ford has enlisted the help of Stanford and the Massachusetts Institute of Technology to find out.
Starting with the automated Fusion Hybrid introduced in December, MIT will be developing algorithms that driverless cars can use to "predict actions of other vehicles and pedestrians" and objects within the three-dimensional map provided by its four LIDAR sensors.
The Stanford team will research how to extend the 'vision' of that LIDAR array beyond obstructions while driving, analogous to the way a driver uses the entire width of a lane to see what's ahead of a larger vehicle in front. Ford says it wants to "provide the vehicle with common sense" as part of its Blueprint for Mobility, preparing for an autonomous world from 2025 and beyond.