2012 Ford Focus Titanium 2.ol/no Reserve/sync/navi/ Lthr/sunroof/salvage/rebuilt on 2040-cars

Auto blog

2015 Ford F-Series Super Duty Power Stroke

What weighs 30,000 pounds? Big Ben's Westminster bell. A navy ship anchor. Or as we found out during our first drive program for the 2015 Ford F-Series Super Duty, seven pallets of cinder blocks loaded onto a dual-axle gooseneck trailer. The test was part of a raft of towing demonstrations that showcased the new Super Duty's impressive tug capacity, which maxes out at 32,100 pounds. That's 1,200 more than its nearest rival, the Ram 3500, when equipped with its upgraded 6.7-liter Power Stroke diesel V8. Such is the heavy-duty pickup truck business, a diesel-fueled game of one-upmanship with only three players: Ford, Chevrolet/GMC and Ram. And in this game, the one with the most torque wins.
Until 2014, Ford was the one to beat, with its 6.7-liter Power Stroke diesel bringing 400 hp and a massive 800 lb-ft of torque to the table. Then last year, Ram did exactly that, serving Ford with a beefed-up Cummins turbodiesel inline-six in its freshened Ram Heavy Duty truck line with 385 hp and 850 lb-ft of torque, enabling it to tow up to 30,000 pounds. But Ford claims it had designed its engine to be relatively easy to upgrade when the time called for it, so for 2015, Ford bolted a larger turbo to the Power Stroke, bringing output to an insane 440 hp and 860 lb-ft of twist, all without reducing fuel efficiency. Maximum tow capacity rises from 24,700 lbs to an incredible 31,200 lbs for the F-450 dually.
As for GM's HDs? They lag behind the lot with their 6.6-liter Duramax V-8, producing 397 hp and 765 lb-ft of torque. Yeah, you know things are serious when the trucks with 765 lb-ft are the knock-kneed wimps of the lot.

NHTSA will investigate some Ford Fusion, Lincoln MKZ models for power steering issue

The National Highway Traffic Safety Administration is opening an investigation into the 2010-2012 Ford Fusion, Fusion Hybrid and Lincoln MKZ, the 2012 MKZ Hybrid and 2011 Mercury Milan because the agency has hundreds of complaints of electric power steering failure in these models.
According to NHTSA's data, it has received 508 complaints of the power steering allegedly suddenly malfunctioning and resulting in increased effort to turn the wheel. In four incidents, these failures resulted in loss of control and crashes. According to the reports, in some cases a power steering warning message came on as the fault occurred, and other times the system restored itself by turning off and then restarting the vehicle. NHTSA said it has also received further field report data from Ford, but that information hasn't been publicly released yet.
For the moment, there isn't a recall for this failure on these models. NHTSA is just investigating them to "assess the scope, frequency and safety consequences of the alleged defect," and the agency says an estimated 938,000 vehicles could potentially be affected.

NHTSA closes Ford F-150 EcoBoost acceleration probe

Typically when we report on the findings of an investigation from the National Highway Traffic Safety Administration, it's because the government body has discovered a safety issue and prescribed a recall. In this case, however, NHTSA has closed an investigation into a reported performance deficit without ever getting to the recall stage.
The issue revolves around the Ford F-150 - specifically those equipped with the 3.5-liter EcoBoost engine - of which some 360,000 were built in the 2011, 2012 and 2013 model years. After receiving an initial 95 complaints, NHTSA opened an investigation last May - almost a year ago - into the reported issue of reduced engine power under hard acceleration. The agency has since received a total of 525 such complaints, and Ford itself reported receiving over 4,000.
Together, NHTSA and Ford determined that the problem resulted from cylinders misfiring, an issue itself stemming from water getting into the charge air cooler (CAC) mated to the turbochargers. In particularly humid or rainy conditions, water was found to get into the CAC, causing some of the cylinders to misfire, which in turn triggered the ECU to disable those cylinders in order to protect the catalytic converter from damage.