1930 Model A Project on 2040-cars
Trumansburg, New York, United States
Engine:283
Body Type:Coupe
Vehicle Title:Clear
Sub Model: Coupe
Make: Ford
Exterior Color: bare
Model: Model A
Interior Color: bare
Trim: needed
Drive Type: tow only
Mileage: 0
So this is my 1930 Model A project. Its pretty far along in the mock up stage and doesnt need alot before its ready for finishing. I bought the car in virginia as a running barn find and chopped it up. The top is chopped 4.5" and needs finish welded. the passenger door has had a new bottom installed. Both cowl bottoms, wheel tubs and body rails have been replaced. the cowl tank has been cut out and the roof was filled before i got the car. The car needs the floors and the firewall completed. A steering column needs to be added and its ready to brake down and finish. the frame has been boxed and kicked up in the rear. The front end is all new superbell drilled and 4"dropped. There are new king pins, spindles, rotors, caliper brackets, steering arms, spring, shackles, drag link, vega box, pitman arm and hair pins. The rear is a 9" from a versalis and is 28 spline open with 331 gears. i have some of the rear disc brake parts but not all of them. The rear suspension is a pete and jakes ladder bar with panhard bar and coil overs. The motor is a 283 that ran a few years back but needs rebuild, the tunnel ram and sanderson headers are included. The trans is a good low mile 350 turbo. there are new guide 182 replica headlights and the car comes with the hood and sides. I have a seat from a dodge mini van that comes with it. The wheels and tires are new boyds and are halibrand replicas, they are dirty but have not seen the road. What you see is what you get so ask questions up front. The car obviously needs work but i feel the hardest part is done.
I will look at possible trades but be realistic, i dont want your low value junk!
The car needs to be picked up and all arrangements made by new owner. obviously its a project so once you buy it you own it there are no guarantees. I need $500.00 down within 24 hours and the rest paid in cash within a week.
Ford Model A for Sale
- 1929 ford model a hot rod rat rod chopped channeled jalopy vintage sbc(US $11,500.00)
- 1930 ford model a truck rat hot street rod custom built steel
- 1931 ford coupe abone hotrod traditional abone 32 gasser deuce 30 29 not ratrod
- 1929 ford model a roadster barn find clean title(US $8,000.00)
- Ford model a standard murray sedan fordor model 165 a rat hot rod barn find look
- 1930 ford model a pickup(US $15,000.00)
Auto Services in New York
Whitesboro Frame & Body Svc ★★★★★
Used-Car Outlet ★★★★★
US Petroleum ★★★★★
Transitowne Misibushi ★★★★★
Transitowne Hyundai ★★★★★
Tirri Motor Cars ★★★★★
Auto blog
EU formally questions French government assistance of Peugeot's finance arm
Fri, 28 Dec 2012Recently, the finance arm of PSA/Peugeot-Citroën was in such debt trouble that it was pricing itself out of the car loan market. The rates it was paying to service its debt, which was rated one step above junk, were so high that it was forced to charge car-buying customers higher rates than they could find elsewhere. This was adding to Peugeot's already impressive woes by sending revenue out the door to competitors.
Two months ago a deal was worked out with the French government whereby the state would provide 7 billion euro ($9 billion USD) in bonds to guarantee the finance arm's loans. The French government could nominate someone to join the Peugeot board, Peugeot would guarantee more French jobs, and on top of that deal, other banks would provide non-guaranteed loans. The government would take no equity stake in the car company.
Although not yet finalized, the arrangement is meant to create some breathing room for Peugeot Finance to lower its interest rates for customers, and a government-nominated board member, Louis Gallois, was recently named to Peugeot's supervisory board. The arrangement was also openly questioned by at least three competitors: Ford, Renault - which is 15-percent owned by the French government after it received state aid - and the German state of Lower Saxony, itself a 15-percent shareholder in Volkswagen.
Ford readying dozen+ Mustang models for SEMA
Wed, 22 Oct 2014Ford is unsurprisingly bringing a herd of its new 2015 Mustang models to next month's SEMA show in Las Vegas. Over a dozen of them are arriving from top aftermarket outfits like Galpin Auto Sports, Steeda, Roush and others. The Blue Oval isn't just shining a spotlight on the V8 model, though. The new EcoBoost 2.3-liter version with 310 horsepower and 320 pound-feet of torque is also getting its time in the sun.
Among the shined-up ponies will be a showcar helping Galpin celebrate the Mustang's golden anniversary, with the car is covered in the precious metal. The black paint over the body has gold flecks in it, and the wheels, side sills, brake calipers and badges all match, as well. However, it takes more than something shiny to truly impress at SEMA, and Galpin's Mustang also packs a Whipple supercharger for the 5.0-liter V8, boosting the bottom line to 725 horsepower. Take that, Hellcat. There's even a window in the hood to look through, not unlike a Chevrolet Corvette ZR1. The coupe also wears new headlights with LED turn signals that activate in sequence, just like the taillights, and the interior features black-and-gold Recaro seats.
Also set for its SEMA debut is an MRT showcar that takes the EcoBoost Mustang for a gallop with its TKO treatment. The black and orange two-tone car has been designed to incorporate select road racing elements. Mechanical upgrades include 14-inch brake rotors with new ducts, a Vortech air-to-air intercooler and an Air Lift suspension. The Mustang also shows off the company's products for added style and performance including a hood with integrated heat extractors and a unique front splitter.
Cadillac ELR, Nissan Resonance and Ford Atlas win Eyes on Design awards
Fri, 18 Jan 2013This year's annual Eyes on Design awards were presented at the end of press days for the Detroit Auto Show on Tuesday. Given out for the best production and concept car designs that debuted at the show, and voted on by an esteemed panel of actual car designers, this year's award for best production vehicle design went to the 2014 Cadillac ELR. The 2014 Chevrolet Corvette, which was the show favorite among Autoblog editors, apparently did not impress the Eyes on Design judges enough with its all-new vent-festooned design.
The award for best concept design was actually split as a tie among the Nissan Resonance and Ford Atlas concepts. Last year's winners were the 2013 Ford Fusion and the Lexus LF-LC concept.
The Eyes on Design organization also presented a new honor this year called the Catalyst Award to Bob Lutz, former Vice Chairman of General Motors. Lutz is reported to have given a defense of design in his acceptance speech, arguing that advancements in quality across the industry as a whole have made good design a key differentiator for buyers.