1923 Ford T-bucket Street Rod on 2040-cars

Auto blog

Ford partnering with MIT, Stanford on autonomous vehicle research

Ask any car engineer what's the biggest variable in achieving fuel economy targets, and he'll tell you "the driver." If one human can't understand human driving behavior enough to be certain about an innocuous number like miles per gallon, how is an autonomous car supposed to figure out what hundreds of other drivers are going to do in the course of a day? Ford has enlisted the help of Stanford and the Massachusetts Institute of Technology to find out.
Starting with the automated Fusion Hybrid introduced in December, MIT will be developing algorithms that driverless cars can use to "predict actions of other vehicles and pedestrians" and objects within the three-dimensional map provided by its four LIDAR sensors.
The Stanford team will research how to extend the 'vision' of that LIDAR array beyond obstructions while driving, analogous to the way a driver uses the entire width of a lane to see what's ahead of a larger vehicle in front. Ford says it wants to "provide the vehicle with common sense" as part of its Blueprint for Mobility, preparing for an autonomous world from 2025 and beyond.

Ford and Chrysler reducing summer plant shutdowns

Most domestic automaker assembly plants traditionally take a couple of weeks off during the summer. The shutdowns give each plant time for much needed repairs and maintenance, and in some cases, help better align production with demand. Not this year, though, as demand for many models is outstripping what Ford, Chrysler and General Motors plants can produce.
Ford has announced that it will shorten its annual summer shutdown for most North American plants from two weeks to one. The shorter shutdown will increase the carmaker's annual North American production by 40,000 units on top of the 200,000 extra units that it was already planning to produce this year versus last. Automotive News reports that Ford produced 2.8 million vehicles on this continent in 2012, and that output this year has already increased 13 percent through April.
Chrysler, meanwhile, is also operating at full tilt and plans to run some plants through the summer with no shutdown at all. Those not getting a break include Jefferson North where the Jeep Grand Cherokee and Dodge Durango are assembled, Toledo North that will assemble the new Cherokee, and Conner Avenue, home of SRT Viper production. Other assembly plants will be down for a single week, while all of Chrysler's engine and transmission plants except one in Indiana will continue operating with no shutdown this summer.

2015 Ford C-Max gets a corporate nose job [w/video]

Ford might not have the splashiest booth here at the 2014 Paris Motor Show, but the automaker is showing off quite a bit of hardware that will actually end up on roads across Europe. Parisians are no doubt tickled at getting to see the specifications of the Mustang tuned for The Continent (which has a revised suspension for European roads, and a few visual nips and tucks), in addition to the revised face of the family-friendly C-Max.
As you can see, C-Max styling has been revisited with a deft touch, grafting Ford's six-sided corporate grille on the nose, in place of the outgoing car's two-part affair. New headlights can also be found on the car's revised front fascia, though the rear end of the C-Max looks only slightly different than the current version.
Inside the cabin, Ford has consolidated controls and upped the ante in terms of material quality, with "black satin" and chrome details and more storage capacity, overall. Grocery-lugging moms and dads everywhere should appreciate the hands-free liftgate feature, as well.