Find or Sell Used Cars, Trucks, and SUVs in USA

Sn 95, One Owner, Project Car (10 Years In Progress), 710 Rear Wheel Hp Complete on 2040-cars

US $17,000.00
Year:1994 Mileage:77500
Location:

Northridge, California, United States

Northridge, California, United States

I purchased this car off the showroom floor back in September 1994, and it looks better than brand new.  The car has been totally loved and built with all the best equipment and parts on todays market.  The car has been in project status for the past 12 years and garaged and cared for throughout that time.  I have developed a data sheet (see below) which spells out all the equipment added and details for that equipment. I have a website Cobra.world-autoparts.com if you want to see more gallery and YouTube information.  
The reason I'm selling the car is that I am retired and have other interests to pursue at this time.

ITEM

Part

MANUFACTURER

ITEM DETAILS

 Motor/Block

Block A4

Ford - SVO

4 Bolt Mains

 

Crank Shaft

Coloa

Forged Billet 302 Crank

 

Rods

Eagle H Beams

Eagle Forged

 

Pistons

Diamond Forged

Forged – May 2013 rebuild

 

Rings

Total Seal

All new for Diamond Pistons

 

Studs

ARP (Complete)

All ARP studs block, heads and bottom end

 

Oil Pan

Canton

9 Quart Racing with built in baffle

 

Cam

Comp Cams custom grind

Intake duration @ 050 232 degrees, Exhaust duration @ 050 242 degrees

 

Gaskets

Fel Pro

Heads, and block

 

Radiator

Fulidyne

Custom installation with stainless steel tubing and overflow billet canister

Heads

 

Trick Flow Twisted Flow

Ported and polished chambers, Iconel exhaust valves.  O ringed for blower.

 

Valves & HW

Com Cams

2.04 stainless steel intakes, 1.6 Iconel exhaust.  Springs, retainers are custom based on high horsepower application.  Titanium retainers.

 

Rockers

Comp Cams

1.7 Ratio (Intake and Exhaust)

 

Valve Covers

Ford (Chrome)

5.0 Standard

 

Studs

ARP

Entire block, heads, rods are all ARP

Intake

One Piece

Hogan Custom Billet

One piece billet aluminum ported and matched to engine specs.

 

Throttle Body

Acufab (80mm)

1993 Fox Body throttle body set up for 90o blower installation

Power Adder

Blower

Vortech (Racing T Trim)

New blower May 2010, with custom built air-to-air Pro Charger intercooler

 

Pulleys

Auto Specialties ( Cogged)

Gated at the blower pulley and ungated at the crank pulley

 

Intercooler

Procharger (Custom Instal)

Custom designed for engine and motor platform.  4” jet coated tubing throughout.

 

Bypass

Vortech (Racing)

Large Vortech racing bypass, polished billet

Exhaust

Headers

Bassani Long Tube

Custom jet coated 1 3/4 ” diameter

 

X Pipe

Bassani

Stainless steel – 2 3/4 ’

 

Mufflers

Bassani

Stainless steel

 

Cats

Bassani – (Hi flow)

Mac

 

Mandrel

Custom

Stainless Steel cat back – 2 3/4'”

Ignition

DFI

FAST Computer

Digital Fuel Injection computer with harness and sensors

 

Spark Box

MSD 6 Plus

Digital Plus version

 

Wires

MSD

Custom  - heat insulated

 

Distributor

MSD Billet

Racing model for 5.0

 

Battery

Optima Yellow, Taylor (rear mounted)

Stainless Steel Box

Fuel System

Rails

Hogan

Rails are built into the manifold

 

Injectors

Rochester (75 Lbs.)

All calibrated May 2010

 

Regulator

Aeromotive

Custom application with gauge for large fuel system

 

Lines

Stainless Steel Braided

Dual system for return line back to tank.

 

Tank

Custom SS Racing 18 gal

Built for ’94 Mustang SN 95 platform – new 2013

 

Pump

Weldon - 1100 HP

Weldon – 1100 hp output

 

A&N Fittings

Custom Applications

Custom Fuel system, engine, intake and other parts of the motor

 

Braided Lines

Stainless

Completely used throughout the fuel system and motor areas

Transmission

5 Speed

Treamec 3650

Heavy duty version

 

Clutch

Spec Systems

Dual puck, designed for 1000 hp application

 

Flywheel

Spec (billet SFI)

Spec kit included

 

Shifter

Pro 5.0

All billet for upper shift application

Suspension

K Member

Griggs Racing

Light weight and custom built for SN 95 Mustang Cobra platform

 

A Arms

Griggs Racing

Custom make for SN 95 platform

 

Coil Over

Griggs Racing

Custom Kit for SN95 platform

 

Shocks

Griggs Racing Koni 5 way adjustable

Adjustable front

 

Caster Plates

Griggs Racing Koni

Custom made for SN95 platform

 

Sway Bar

Steeda

Heavy duty application

 

Shocks

Griggs Racing Koni 5 way adjustable

Adjustable fronts

 

Coil Over

Griggs Racing

All 4 wheels

 

Control Arms

Steeda Racing - Adjustable

Upper and Lower racing applications

 

Torque Arm

Griggs Racing

Small Torque Arm

 

Panard Bar

Griggs Racing

Custom made for SN 95 platform

 

Sub Frame

Griggs Racing

Welded to undercarriage 

Rear Axle

Auburn

Posi traction

Custom Fitted for Ford 9”

 

SVO

3.55 Gears

 

 

Axle

28” Spline

Hardened

Body

SN 95 Platform

Motorsport

 

Hood

Ford Motorsport

Cobra R

4” Cowl

Roll Cage

6 Point

Custom

Welded directly to the frame.

Brakes

Big Brakes

Wilwood 6 Piston

Custom Big Brake Kit and Drilled Rotors. 

Tires

 

Toyo Proxes T1S

245-30-17 Performance

 

 

Nitto Drag Radials

315-35-17 NT 01

Rims

Custom

Cobra R 17”

Chrome

Interior

Seats

Recarro SE Racing

Custom Recarro seats out of a Lamborghini – SE Racing Edition

 

Restraints 5 Pt

Drivers Side

Pyrotecht – 5 Point Harness and belts (black with red stitching).  No passenger side

Tach

Gauges

Auto Meter

Digital Pro Shift System Level 2 & 3 Guages and Tubes

Stereo

Deck

Alpine

Custom stereo head unit

 

Speakers

MB Quart Boston Acoustics

Custom installation into factory speaker outlets

 

Sub Woofer

Bazooka

10” Tube mounted in the back of the fold down rear seats.

 

Crossover

Alpine

Custom 2 channel system

 

Amplifiers

Alpine, Comp USA, Nakamitchi

3 separate amplifiers mounted on the rear deck of the upside down.  Fully integrated into the Alpine Crossover.

Alarm

Clifford

Arrow 3

Anti Theft System

 

Auto Services in California

Yes Auto Glass ★★★★★

Auto Repair & Service, Glass-Auto, Plate, Window, Etc, Windshield Repair
Address: 1602 W Adams Blvd, Universal-City
Phone: (323) 731-3728

Yarbrough Brothers Towing ★★★★★

Auto Repair & Service, Towing, Automotive Roadside Service
Address: 4291 Santa Rosa Ave, Duncans-Mills
Phone: (707) 571-8866

Xtreme Liners Spray-on Bedliners ★★★★★

Auto Repair & Service, Automobile Body Repairing & Painting, Automobile Parts & Supplies
Address: 903 Kansas Ave, Ceres
Phone: (209) 872-8017

Wolf`s Foreign Car Service Inc ★★★★★

Auto Repair & Service, Brake Repair
Address: 7904 Engineer Rd, National-City
Phone: (858) 565-2666

White Oaks Auto Repair ★★★★★

Auto Repair & Service
Address: 1386 White Oaks Rd, Redwood-Estates
Phone: (408) 559-0301

Warner Transmissions ★★★★★

Auto Repair & Service, Auto Transmission, Brake Repair
Address: 1112 Erickson Rd, Clayton
Phone: (925) 421-2912

Auto blog

Ford Focus RS ready to make our hot hatch dreams real

Fri, 17 Oct 2014

Ford's current hot hatch siblings the Fiesta ST and Focus ST are already two pretty great entries into the segment, but there's always a desire for a little more. Thankfully, it looks like the Blue Oval is ready to satiate that need because it's continuing to test the even more powerful Focus RS around Europe. According to our spy shooters, these shots come from near the Nürburgring.
As with previous photos, Ford engineers continue to heavily camouflage the front end of the RS prototypes, but there's a big difference here. Unlike earlier ones, this example appears to have a closer-to-production-ready front bumper rather than just a horizontal strip for the license plate. That may point to development getting somewhat closer to wrapping up. Although, this one lacks the larger rear wing from prior testers, and the exhaust also appears to be a work in progress with the rear diffuser covered in mesh in these latest shots.
The RS is rumored to be using the 2.3-liter turbocharged four-cylinder from the 2015 Mustang, but power is reportedly turned up from 310 horsepower in the 'Stang to somewhere between 325 hp and 350 hp for the Focus. Routing all that just through the front wheels could be a recipe for serious torque steer, and all-wheel drive is potentially being used for better traction.

Watch these Australian Ford and Holden muscle cars duke it out

Wed, 21 Aug 2013

Australia's Motoring has put together a little video on two of the great performance vehicles available down under - the Holden VF Commodore HSV GTS and the Ford Falcon FPV GT R-Spec. And while both FPV and the Falcon might be on their way out, there's still plenty of time for a little head-to-head comparison between the two.
The cars aren't all that well evenly matched, though. The Ford boasts a 5.0-liter, supercharged V8, which the Aussies measure out at 449 horsepower and 420 pound-feet of torque. The HSV, though, with its Corvette-derived, 6.2-liter, supercharged V8 is just too powerful - 576 hp and 545 lb-ft of torque.
Predictably, it doesn't end too well for the Ford. As the guys from Motoring point out, the new VF Commodore is just too new and too good, with its extra power and its adaptive dampers (GM's excellent MagnaRide). Interestingly, Motoring did point out that the Holden's electric steering is better than the Ford's hydraulic steering, which is a lot like a Porsche purist saying they prefer water-cooled engines to air cooled.

Ford confirms 1.5-liter EcoBoost four-cylinder engine for 2014 Fusion

Thu, 11 Apr 2013

Earlier this week, reports were swirling 'round the internet about the 2014 Ford Fusion getting a new 1.5-liter three-cylinder EcoBoost engine. That was... half correct. Ford today confirmed that the 2014 Fusion is, in fact, getting a new 1.5-liter EcoBoost mill, but it has four cylinders, not three.
The new 1.5-liter engine will be the fifth EcoBoost powerplant from Ford Motor Company. Initially to be built at the automaker's Craiova, Romania plant, it will also be offered in the Fusion's twin, the Mondeo, in other markets. This engine will debut at the Shanghai Motor Show next month, and the 1.5-liter is of particular importance in the Chinese market - there is significant tax relief in the People's Republic for vehicles powered by engines with a capacity of 1.5 liters or less.
At a media briefing Thursday, Ford declined to divulge exact power or fuel economy numbers, though Joe Bakaj, vice president of powertrain engineering, told Autoblog that power output should be similar to that of the current 1.6-liter inline-four, and that overall efficiency will be "better than the 1.6." Our earlier report stated that the 1.5-liter four will produce 177 horsepower and 177 pound-feet of torque - losses of 1 hp and 7 lb-ft versus the 1.6-liter engine. Ford states that the 1.5-liter four will feature many of the same technologies used on the company's 1.0-liter EcoBoost inline-three, including an integrated exhaust manifold that recaptures much of the engine's heat.