Find or Sell Used Cars, Trucks, and SUVs in USA

1940 Ford Panel Truck on 2040-cars

Year:1940 Mileage:999999
Location:

Goodyear, Arizona, United States

Goodyear, Arizona, United States
Body Type:Panel
Vehicle Title:Clear
For Sale By:Private Seller
Year: 1940
Make: Ford
Model: Other Pickups
Mileage: 999,999
Condition: UsedA vehicle is considered used if it has been registered and issued a title. Used vehicles have had at least one previous owner. The condition of the exterior, interior and engine can vary depending on the vehicle's history. See the seller's listing for full details and description of any imperfections.Seller Notes:"This Panel is without Drivetrain, it is a rolling chassis"

I purchased this truck just over a year ago with the intentions of adding whatever it took to get it going I.E.- the drivetrain-Engine-Trans- and/glass/interior-etc...etc. However my health now forces me to sell this truck. This is a rare Panel truck. I don't Have allot of knowledge on the truck as it has pretty much sat for the last year. How you see it is how I got it.

History that I know: It was worked on in Ohio-sold in Minnesota and I bought it there.

I am posting a few pictures. The tail lights and 3rd light as you can see are Frenched in. The hood-springs and grille look new- the firewall and front floor seemingly are replaced with what I believe are 'bitchin' products. The Rear Diff. I believe is from a Corvette- currently with a mono leaf spring. Disc Brakes up front- will need completion of parts- etc.

Truck needs to be completed- hardware/door regulators-dash gauges- harness--Engine/Trans-Driveshaft. This is an excellent project to start with- When was the last time you saw a 40 Ford panel truck-? There is a tray built (formed) into the back just inside the back doors.

Disclaimers: Ask Questions Before Bidding-Sold as is- No warranty implied or expressed-The sale can end at any time as I am listing it locally. Buyer to pay all shipping costs. The truck is not registered. I have the title in my name-It will not leave till the truck is paid for. Look at the pictures and contact me with any questions- I don't see a number punched into this frame-from 1940-$1000.00 non refundable due within 24 Hours and balance within 5 days-NO PAYPAL-

Truck is in Goodyear, Arizona 85395 (for your shipping quotes) (Phoenix area) Call D with questions- 623.385.2545


 

 

Auto Services in Arizona

Windshield Replacement Phoenix ★★★★★

Auto Repair & Service, Windshield Repair
Address: 3001 N Randolph Rd, Glendale
Phone: (602) 792-5954

Valley Express Auto Repair ★★★★★

Auto Repair & Service, Automobile Air Conditioning Equipment-Service & Repair, Automotive Tune Up Service
Address: 629 W Broadway Rd, Paradise-Valley
Phone: (480) 630-1279

Tj`s Speedometer Repair ★★★★★

Automobile Parts & Supplies, Speedometers
Address: 2100 N. Stone Avenue, Oro-Valley
Phone: (520) 304-0242

Super Discount Transmissions ★★★★★

Auto Repair & Service, Auto Transmission
Address: 2330 W Glendale Ave, Phoenix
Phone: (602) 995-7443

Sun Devil Auto ★★★★★

Auto Repair & Service, Automobile Parts & Supplies, Auto Body Parts
Address: 8919 E San Victor Dr, Paradise-Valley
Phone: (480) 860-8494

Storm Auto Glass ★★★★★

Automobile Parts & Supplies, Glass-Auto, Plate, Window, Etc, Windshield Repair
Address: 800 W Route 66 Ste 6, Bellemont
Phone: (928) 814-9391

Auto blog

Has the 2015 Ford Mustang gained hundreds of pounds?

Sun, 01 Jun 2014

Automakers face competing interests when it comes to developing a new generation of vehicle. On the one hand, companies want to build their cars to be safer and better handling, with more equipment and maybe even larger dimensions over the model it's replacing. On the other hand, they strive to keep weight down to the benefit of both performance and fuel consumption. Usually something has to give, and in the case of the new 2015 Ford Mustang, those efforts may have resulted in a weight penalty of two or three hundred pounds.
This according to Blue Oval modifier Steeda Autosports, which states that "the 2015 Mustang ended up gaining 200-300 pounds in this remake". Despite the Mustang not being on the market yet, it would appear the leading Ford aftermarketer has been given early access to the 2015 model to help jumpstart its tuning efforts (a rather common development among trusted tuners). If Steeda's assertion is accurate, that would make the challenge of getting the new pony car up to speed for both Ford and aftermarket customizers like Steeda that much greater.
We're waiting for official word from Ford on the veracity of Steeda's claim, but if true, it's bound to be a bit of disappointing news for legions of Blue Oval performance enthusiasts. Watch this space for more.

Ford opens the doors on its Swedish rally skunkworks

Fri, 19 Sep 2014

It's always amazing to see how different kinds of racecars are made. Formula One racers are often constructed in modern architectural marvels that hint at some of the cutting-edge technology going into the racing. Conversely, rallying is all about sliding around on a varied course as fast as possible, but it often leaves a vehicle caked in mud. So it makes some sense Olsbergs MSE, or simply (OMSE) rally car shop in Nynashamn, Sweden, shows technological sophistication in a more down-to-earth setting. It builds Ford Fiesta ST racers for Global Rallycross there, and this new video gives viewers a tour through the work.
Former rally driver Andreas Eriksson runs OMSE. These days instead of racing, he and the company's 46 employees are building Ford racers from scratch. A ton of work goes into constructing each one, and according to Eriksson, it takes 400 hours to complete each body. At times, things are so busy that some of the technicians live in the shop in apartments that are on premises. There's even a restaurant to keep them fed. Sadly the dyno room is empty during this visit, though.
By the time OMSE is done, a rallycross car might resemble a Fiesta ST on the outside, but as you see in the video, it's a completely different beast underneath. Check out the work it takes to build one of them, and scroll down to read more about it in the official release.

Hennessey unleashes 2015 HPE700 supercharged Ford Mustang

Sun, 05 Oct 2014

Thanks to the 2015 Dodge Challenger SRT Hellcat there is a new magic number in the muscle car world - 707. To raise eyebrows these days in the power war, a vehicle needs to match or preferably exceed that palindromic figure. The tuners over at Hennessey took a look at it for their 2015 HPE700 Mustang and decided to go one better. Well, ten actually, because they bestowed their latest creation with 717 horsepower and 632 pound-feet of torque.
The HPE 700 Mustang takes the standard Mustang GT with its 5.0-liter V8 and turns up the power a few hundred notches with a Roots-type supercharger running at 7.25 psi. Hennessey claims that this boosted 'Stang can rocket to 60 miles per hour in about 3.6 seconds and cover the quarter-mile in 11.2 seconds at 131 mph. For those keeping score at home, those figures are very similar to Challenger Hellcat.
To cope with all of the added boost, the engine gets a high-flow throttle body, upgraded injectors, new fuel pump, stainless steel exhaust and Hennessey's calibration for the engine management. Pricing for the package is $59,500, including the base 2015 Mustang GT, but the company is limiting production to 500 units for the 2015 model year. Founder John Hennessey told Autoblog that he has already received about a dozen orders for them.