Find or Sell Used Cars, Trucks, and SUVs in USA

1962 Ford Falcon Ranchero W/ 302 V8 Conversion - Low Reserve - Runs Great! on 2040-cars

US $5,500.00
Year:1962 Mileage:122000
Location:

Saint Clairsville, Ohio, United States

Saint Clairsville, Ohio, United States

You are looking at a 1962 Ford Ranchero with a V8 conversion.  I purchased this truck a few months ago as a project for my sons to work with me on.  I bought it from an old timer who was in the process of bringing it back to life but who lost interest in the project once his wife died.  My kids have had a blast working on it with me and have really learned from the experience.  Unfortunately I am 6’7” tall and, while I am able to drive this truck, it is a tight squeeze for me so I’d like to find a larger vehicle for us to work on – a 60s or 70s Ford or Chevrolet pickup or a later model Ranchero.

 

I’ll apologize ahead of time if the description is long-winded but I figure if you are going to consider spending thousands of dollars on a vehicle you should have as much information as possible including text, pictures and videos. 

 

The truck has a rat rod/old school hot rod feel to it with the primer and the Hillborn style scoop sticking out of the hood.  While it isn’t a rat rod by most definitions, that is the overall vibe of the car and how many see it.  It gets attention wherever it goes – seems that people always want to talk about it.  You just don’t see too many of these around.

 

Here are some of its features:

 

Motor:

Originally a 6 cylinder manual transmission vehicle, the truck is now powered by a Summit Racing 302 short block that was put in 4 years ago and has less than 2K miles on it.  It is as fresh as the day it was put in, has a very mild cam that allows for a great sound while still remaining completely streetable.  It starts right up without any smoke and has great compression and oil pressure.  It has 1966 302 heads (the previous owner said they were out of a Mustang), an Edelbrock 1405 Performer 600 CFM 4 barrel carb with a manual choke, an Edelbrock performer intake and Headman headers.  This motor was done right and is turn-key.

 

You can hear a bit of idle and revving here: http://youtu.be/OSo4NQxx6BI

 

I also shot a video of it going down the road in a mix of back road and highway conditions so that you can hear it run.  Don’t mind the bouncing – it’s my phone mount not the car’s suspension.  You can find the video here: http://youtu.be/7cWjuZFm2PA

 

Exhaust:

The truck has brand new exhaust on it from the headers back.  It features Cherry Bombs and it dumps out right in front of the rear wheels.  The side exit exhaust really adds to the hot rod feel of the truck.  It sounds great and there is no drone to it.

 

Body:

The body is straight with a few bubbles visible very low on the car but nothing significant at all.  Some rust underneath but the fame is solid as are the passenger and driver floor pans (it appears that the driver’s side has been replaced, perhaps the passenger side as well).  Rust through the bottom of what would be the passenger foot wells had this been a station wagon (if you are familiar with these you know what I am talking about) but these are under the bed of the truck and are not used.  They can be fixed from above easily by removing the forward panel in the truck bed.  The bed itself is solid and the tailgate works as it should.  The tails have blue dots in them.  All signals and lights work.  The gas tank has been replaced with one from a 67 Falcon and the filler has been relocated to the bed area for a sleeker look along the sides of the vehicle.  The opening that was cut into the hood is rough.  It has some molding around it and looks OK from 10’ away but it leaves a little to be desired.  If I were going to keep it I would replace the hood with an aftermarket fiberglass hood (which are plentiful thanks to it sharing hood specifications with the Falcon of that year).  Or you can leave it as is (everybody seems to love seeing a car with something sticking out of the hood!) or massage that opening a bit to give it a more polished appearance.  Original Falcon hoods show up on eBay regularly and will normally run you less than $250 if you want to go that route.  You’ll just need a lower profile air cleaner to make that work.

 

Transmission and Rear:

The transmission is a 2spd and the rear is a Ford 8” unit.  It has 3.21 gears in it and was overhauled (including u-joints) in 2010. The transmission shifts smoothly and has no issues.  The shifter is a brand new Hurst V-Matic 3.

 

Interior:

The interior has been completely gone over and features brand new seats and carpets.  There is subtle red LED lighting in the footwells.  It has a new Grant leather steering wheel with a horn button (not hooked up).  There is a Sun tach on the dash and gauges mounted where the factory radio once sat.  If I were going to keep it I’d move them down to the bottom edge of the dash and either install a radio or a radio delete plate to cover the hole.  The instrument panel is out of a 1962 Comet.  I have a correct bezel that comes with the car should you wish to replace it.  The headliner is in good shape.  There are nice billet pulls in place for the control knobs.

 

Brakes:

It has manual brakes with drums in the rear but the fronts have been converted to disc brakes by way of a Scarebird conversion kit.  They stop perfectly with no noise or other issues.  Emergency brake is not hooked up.

 

Wheels/Tires:

Vintage 14” slotted wheels all the way around.  4 lugs on the front and 5 on the back.  Not sure of the manufacturer but “made in the U.S.A.” is cast on the rear of each wheel.  Tires are is decent shape and are holding air.

 

Miscellaneous:

The truck goes down the road straight and true and has none of the loose steering issues I saw in so many of these trucks when I was looking to purchase one.  It has new chrome Lakewood traction bars.  The tails have blue dots in them.  All signals and lights work.  There is a horn in the car but it isn’t hooked up.

 

Extra Parts/Items:

Shop manual including wiring diagram insert.  Some receipts and misc. documentation for previous owner.  Some spare parts that I will dig through and pass on to the new owner if they want them.

 

As it sits right now, this is a great truck for what we had intended it for – i.e. running errands, going to local cruise-ins, hauling things around, etc.  The 2spd transmission is a very tough and well-built piece but which limits its usefulness as a long-haul highway vehicle – particularly with 3.21 gears hanging in the rear.  That’s not to say that it can’t travel great distances but it’s more of a back road truck that can cruise comfortably at 55mph anywhere.  For example, I purchased the truck in Cincinnati which is 5+ hours at 75mph via the major highways.  I drove it home using the back roads for 8 hours straight at around 55mph on average with no issues whatsoever.  If you are interested in taking this truck on longer highway trips you could either put some numerically lower gears in the back or swap out the transmission.

 

Please know that I do not have to sell this truck (in fact, my kids are quite attached to it) but will do so at the right price point in order to put the money toward a larger vehicle.  This isn’t a $10K truck but it isn’t a $3K truck either so please be reasonable in your offers.  My reserve is set at my break-even point which is less than 1/2 of the NADA low retail value for this vehicle.  If it doesn’t sell I’ll just keep driving it and working on it until it does.  It is for sale locally and I reserve the right to cancel the auction and all bids if it sells first on this end.

 

The truck is being sold as-is and where-is without warranty of any kind.  I have done my best to describe it accurately but it is a 52 year old truck.  I encourage an in-person inspection prior to bidding and I will do whatever I can to facilitate that.  I will help with delivery and will even consider driving it a couple of hundred miles in one direction or the other.  As I stated previously, I’d be confident driving it anywhere as long as I can avoid any extended 70mph driving on major highways.

 

The truck has a clear (i.e. not salvage, not rebuilt) Ohio title.  There is a note that “mileage exceeds mechanical limits” as it is impossible to tell how many miles are on the truck with the replacement instrument panel in place.  I guessed at 122,000 based upon history from the previous owner but who knows.

 

Finally, I am looking for a later model Ranchero or a vintage pick-up so if you have a 1967-77 Ranchero or a 60s or 70s (or earlier) Ford or Chevy pickup let’s talk…

 

Good luck and please feel free to ask any questions you might have.

 

 

Auto Services in Ohio

Walt`s Auto Inc ★★★★★

Automobile Parts & Supplies, Used & Rebuilt Auto Parts, Automobile Salvage
Address: Harrison
Phone: (800) 325-7564

Verity Auto & Cycle Repair ★★★★★

Auto Repair & Service, Tire Dealers
Address: 2504 N Verity Pkwy, Middletown
Phone: (513) 422-1970

Vaughn`s Auto Svc ★★★★★

Auto Repair & Service, Automobile Parts & Supplies, Automobile Accessories
Address: 127 W Sugartree St, Cuba
Phone: (937) 382-7149

Truechoice ★★★★★

Automobile Parts & Supplies, Automobile Performance, Racing & Sports Car Equipment, Automobile Accessories
Address: 4677 Northwest Pkwy, West-Jefferson
Phone: (614) 759-4327

The Mobile Mechanic of Cleveland ★★★★★

Auto Repair & Service, Brake Repair, Automotive Roadside Service
Address: Taylor Road, Lakewood
Phone: (216) 744-4888

The Car Guy ★★★★★

New Car Dealers
Address: 637 S 9th St, Hollansburg
Phone: (765) 977-7907

Auto blog

Automakers' rush on aluminum may result in shortage

Thu, 13 Feb 2014

Aluminum is the new buzzword in the automotive industry. The latest Range Rover and Range Rover Sport both take advantage of the lightweight material to shave huge amounts of body fat (only it's called "aluminium" over there). Audi and Jaguar have been using the stuff for years in their A8 and XJ, respectively, and now, aluminum is going mainstream, arriving on the 2015 Ford F-150.
While we're excited to see aluminum make an impact outside the premium market, its widespread adoption apparently won't come without some problems, notably in terms of supply. "There isn't an automotive manufacturer that makes vehicles in North America that we're not talking to," Tom Boney, of Novelis, the largest global supplier of aluminum sheetmetal, told The Detroit News.
According to Boney, Ford's use of aluminum on such a large scale has forced auto manufacturers in "every boardroom" to reconsider their plans following the F-150's unveiling, for one simple reason: there's not exactly enough aluminum to go around, at least in the short term. The auto industry presently only accounts for six percent of the aluminum sheet produced, but as the material is adopted by more and more brands, that figure is expected to swell to 25 percent within the next six years.

Autoblog Podcast #317

Wed, 23 Jan 2013

Mitsubishi Mirage, Toyota thinks of beefing up US production, Marchionne on Alfa, Dart and minivans, Ford Atlas concept, Honda Gear concept
Episode #317 of the Autoblog Podcast is here, and this week, Dan Roth, Jeff Ross and Michael Harley bookend the other podcast topics with a pair from the Montreal Auto Show, the Mitsubishi Mirage and Honda Gear concept, and in between we talk about Toyota building all its US-market cars stateside, Hyundai building a Nurburgring test facility, Sergio Marchionne's latest words about Alfa Romeo, Dodge Dart powertrains and the future of Chrysler vans. Some chatter about the Ford Atlas concept finishes up the meat of the 'cast and then we wrap with your questions. For those of you who hung with us live on our UStream channel, thanks for taking the time. Keep reading for our Q&A module for you to scroll through and follow along, too. Thanks for listening!
Autoblog Podcast #317:

1964 Ford GT40 prototype to be auctioned in April

Wed, 12 Mar 2014

The Ford GT40 owns a firm spot on the list of the greatest American racecars ever made, being the first car from the United States to take an overall win in the 24 Hours of Le Mans. And now Mecum will auction what it claims is second-oldest GT40 still in existence at its Houston sale on April 12.
The story of the GT40 is fascinating. Henry Ford II attempted to buy Ferrari in the early '60s, but Enzo refused. Ford decided if he couldn't have them, then he would beat the Prancing Horse on the track. Ford went to Carroll Shelby and asked him to spearhead the program. The early cars combined a steel monocoque chassis with Ford's 4.2-liter V8 engine pumping out around 350 horsepower. The first prototype made its public debuted on April 1, 1964, at the New York Auto Show.
Shelby kept building prototypes, including GT/104, which is for sale here. This version featured a lighter steel chassis and was raced at Le Mans in 1964. However, a fire forced it to retire. It was then repainted and had a 4.7-liter (289-cubic-inch) engine fitted. The chassis had its best finish at the 1965 Daytona Continental 2,000 Kilometers where it finished third with Bob Bondurant and Ritchie Ginther behind the wheel. Later that season, it was shipped back to Ford where it was restored and displayed at auto shows until 1971 when the automaker sold it. Since then, it has had many private owners.