1997 Ford Ranger Super Low Miles on 2040-cars

Auto blog

Ford reveals new rapid prototyping and low-volume production techniques [w/video]

It's called "F3T," and that stands for Ford Free-form Fabrication Technology. The process that The Blue Oval has developed means being able to sidestep the weeks-long process of tool-and-die making when engineers want to construct a new part, allowing them to fabricate a three-dimensional part from a two-dimensional sheet of metal in just hours.
While F3T is being developed it is limited to "low-volume prototyping or even low-volume niche vehicles," but the next step is to evaluate it for use in Ford's global manufacturing facilities. You can find out more about it in the video and the press release below.

Ford recalling 126,000 Fusions and Milans over wheel separation concern

Ford has announced a recall of certain Ford Fusion and Mercury Milan vehicles after an investigation by the National Highway Traffic Safety Administration. A total of 128,616 2010 and 2011 models equipped with steel wheels may have been manufactured with wheel studs that could crack and split over time. If that happens, the vehicle may experience a wheel separation.
According to The Detroit News, the company is aware of a total of 30 wheel separation incidents, one of which occurred on the front of the vehicle. Even so, no injuries have been reported as a result of the defect.
The problem apparently stems from the fact that the mounting pads on the vehicles' steel wheels may have been faulty from the factory. In addition, the wheel mounting face on rear disc brakes may not have been installed properly. Ford will inspect the rear disc face and replace them as necessary. In addition, the company will replace all of the vehicle's wheel studs free of charge. Head to the NHTSA website for more information, and click past the jump to view the full recall notice.

Chevy Silverado frame twist test a marketing victory versus Ford

The pickup market is so competitive that all three major American makers are constantly trying to find a way to prove their product is the best. The new 2015 Ford F-150 is grabbing headlines at the moment by winning awards and posting segment best numbers. But in a new video, Chevrolet is taking aim squarely at the 2015 F-250 Super Duty in a battle of heavy-duty truck supremacy against the 2015 Chevy Silverado 2500HD... well, in a single metric anyway.
The big numbers from pickups often come down to payload, towing rating and fuel economy, but for this test, Chevy and Howie Long are challenging the torsional rigidity of the trucks' frames, specifically which one flexes less. Long plays the everyman here having the Chevy engineer explain what's going on in the tests. Unsurprisingly for a video on Chevy's official YouTube page, the 2500HD wins out by a good margin. The company also reports that similar results as shown here have been certified in third-party testing.
Check out the video to see the full test. While this might seem like a marketing win for Chevy, Ford isn't immune to it, either. In 2009, the Blue Oval uploaded a similar video comparing the flex under 225 pounds of weight from the bare frames of the F-150, Chevy Silverado, Dodge Ram (as it was still called at the time) and the Toyota Tundra. The results fell in the Blue Oval's favor, as you can see here.