Find or Sell Used Cars, Trucks, and SUVs in USA

Ford Torino on 2040-cars

US $10,000.00
Year:1968 Mileage:30300
Location:

Sulphur, Louisiana, United States

Sulphur, Louisiana, United States

This one is NOT for the purists! This is not a show car either. Sure it gets tons of attention and compliments, but it's still a work in progress. One you can easily drive and enjoy as is, or fix up the way you like.

Originally, according to the VIN, it was an automatic column shift 289 car. Nowadays, it has the power-train out of a 1991 Lincoln Mark VII. This consists of a fuel injected 5.0 liter H.O. 302, an A.O.D transmission (4 speed Automatic with Over-drive), power disk brakes at all wheels, and a Ford 8.8". All of these came from the Mark VII. I did not do the conversion - I bought it this way. Car runs great. It is not a high horsepower monster by any means. It seems to be at it's stock 225 HP. The car is a bit loud because of this, but it sounds pretty good. Check the video links to get an idea. I have no idea the miles on the power-train, and no idea of the miles on the car itself. Pretty sure the odometer has rolled at least once. Car has aftermarket installed power door-locks, key-less entry and power windows. The power window motors work, but are missing the gears that attach them to the window housing. I have identified the part needed to make the windows work, but had no desire to buy and install them. Car has an after market A/C unit that works great. Only blows cold, no heat. Crappy satin black paint job, but it looks cool. Has a decent CD/stereo that works well. Dash is in pretty good shape, a little shrinkage at the base of the windshield. The gauges work. The fourth pod in the dash has an aftermarket tach installed. The hood has I little damage at the passenger side hood hing from someone trying to get the hood to lay flat. Car has side exit exhaust. 

The car is NOT a Cobra. A previous owner must have installed Cobra emblems all over the inside and outside of the car. I don't think the Cobras Torinos came out until 1969.

The car runs and drives really good, both around town and on the highway at 75 MPH. The old school alignment is excellent, and the power-steering returns to center. The power brakes work well, too. With the aftermarket valve body, the transmission shifts very firm 1st to 2nd. It shifts well even manually doing the old 1-2 shuffle with the AOD. The front wheels are a little too wide and it rubs on the passenger front sometimes when making a tight right turn. The current wheels on the car were temporary, trying to find a setup that works well in a wheel I like. The flat black US Wheel wheels are 15x7 all the way around. The 14" Cragars in the pictures did not have any rubbing issues. The car does not come with the Cragar wheels. I sold those a year ago. I removed the door panels that were in the car when I bought it, as they were terrible homemade panels. I had planned on doing the whole interior (carpet, headliner, door panels) black. These parts can be found at Dearborn Classics website. I don't like the red interior at all, and the center console is a piece of homemade junk, too. The shifter works fine, but is goofy looking. Passenger side window falls out of the front bracket when you roll the window down. So until it is fixed it needs to stay up. This has been an ongoing issue. I have brought it to 2 different shops and the fix only lasts about 6 months. Even with the new power steering control valve, there is still a little leakage of PS fluid. There are some paint/rust bubble at the back of the windshield. The floor pans have no rust as you can see in the pics. Trunk section looks great too.

If sold, the car will come with 2 sets of basically new front and rear tires. The set not on the car is wider front and back. The back were too wide when I lowered the car. I had ordered some new, less wide fronts, thinking this would keep the right front tire from rubbing, but it still rubs with the less wide tire. I had planned on installing shorter axles in the back so I could use the wider tires on a wider wheel with the proper backspacing, as there is a little over 2 inches of room from the leaf-springs.


Here is a list of new items I have installed. I have most of the receipts for these items:

-new disk brakes, rotors, and hubs all the way around.
-new Firestone Fire hawk Indy 500 raised white letter tires all the way around. Maybe have 1000 miles on them. Less miles on the other set that comes with the car.
-new window cranks front and back.
-new satin finished driver and passenger side mirrors.
-new front and rear anti-sway bars. Rear is from Addco (7/8"diameter), and front is from Mustangs Plus (1" diameter).
-new composite/fiberglass leaf-springs custom made by Flex Form.
-new shackles, bushings, u-bolts in the rear suspension from Eaton Detroit Springs.
-new 2" lowering springs in the front from Eaton Detroit Springs (car sits 2" lower than stock. Had the composite leaf springs custom made to lower the back too).
-new KYB shocks, front and back.
-new front Procar Rally seats. They are awesome.
-found an original Mach I hood scoop and had it refinished by a paint and body shop. Bought a new hood scoop blinker harness and blinker. Had it all installed and it is really
 cool. This was an option on the '69 Torino GT, but not the '68's. The hood scoop blinkers work great.
-new tri-gauge pod installed. Water temp, oil temp, and volt meter.
-new water pump
-new spark plugs and wires
-alignment done.
-new aluminum radiator.
-added a new transmission cooler.
-Eaton Tru-Trac limited slip diff (originally had an open diff)
-3.73 Yukon gears (had 3.08 prior)
-really nice aftermarket valve body by SilverFox
-re-manufactured power-steering control valve. Now with the correct fluid, the power steering works great, makes no annoying noises.

Title is free and clear and I have it on hand.



A couple vids of the car:

http://www.youtube.com/watch?v=yS9FbWDtC9U

http://www.youtube.com/watch?v=bRRlvsLEAdQ


Please let all the pics load up. There are about 50 of them. I include some pics with the chrome Cragar wheels so you could see how the car would look without black wheels.






On Jan-22-14 at 20:14:59 PST, seller added the following information:

Well I seem to have put the VIN and the pic of the wrong Torino! Thanks for pointing this out. That VIN and title was from a Torino I recently sold.


The correct VIN for this car is 8K42C164393 
Sorry for any confusion. Please disregard the VIN that is in the main heading as I can't change it while the auction is ongoing


Here is the link to the correct title picture:


Auto Services in Louisiana

Walker`s Wrecking Yard & Auto Parts ★★★★★

Automobile Parts & Supplies, Used & Rebuilt Auto Parts, Automobile Accessories
Address: 9757 Highway 190 W, Merryville
Phone: (337) 825-8735

Walker Tire ★★★★★

Auto Repair & Service, Tire Dealers, Auto Oil & Lube
Address: 10350 Florida Blvd, Denham-Spgs
Phone: (225) 664-0155

Upholstery Limited ★★★★★

Automobile Parts & Supplies, Upholstery Fabrics, Automobile Seat Covers, Tops & Upholstery
Address: 9020 S Choctaw Dr, Sorrento
Phone: (225) 928-1907

Universal Diesel Service ★★★★★

Auto Repair & Service, Engines-Diesel, Engines-Diesel-Fuel Injection Parts & Service
Address: 3610 E Napoleon St, Sulphur
Phone: (337) 626-1688

Tropical Car Wash & Brake Tag Station ★★★★★

Auto Repair & Service, Automobile Inspection Stations & Services, Brake Repair
Address: 3013 David Dr, Luling
Phone: (504) 885-2969

Supreme Collision & Towing ★★★★★

Auto Repair & Service, Automobile Body Repairing & Painting, Towing
Address: Mathews
Phone: (985) 526-8991

Auto blog

Ford Escort returns, just not for US

Sat, 19 Apr 2014

Ford is set to give the burgeoning Chinese market its very own C-segment model, while also reviving one of the brand's more notable nameplates. The new Escort, which will make its world debut at the 2014 Beijing Motor Show will be built in the People's Republic at the Changan Ford joint venture facility.
The Escort's exterior is best thought of as a mix of the finer points from the US market Focus and Fusion, with the Aston Martin-ish grille and narrow, wraparound taillights presenting a clean look at either end of the car. It's all fairly true to the concept car from last year's Shanghai Motor Show. That said, this exterior job is almost too clean. There doesn't seem to be a lot of character or substance beyond the typical Ford looks.
There's a similar issue in the cabin - it all looks pretty nice, but the design is rather plain, particularly when viewed alongside the display-filled cabin of a US-spec car. Still, there looks to be a fair amount of space in both the front and back seats, and the trunk isn't exactly tiny, either.

Ford recalling 126,000 Fusions and Milans over wheel separation concern

Fri, 09 Dec 2011

Ford has announced a recall of certain Ford Fusion and Mercury Milan vehicles after an investigation by the National Highway Traffic Safety Administration. A total of 128,616 2010 and 2011 models equipped with steel wheels may have been manufactured with wheel studs that could crack and split over time. If that happens, the vehicle may experience a wheel separation.
According to The Detroit News, the company is aware of a total of 30 wheel separation incidents, one of which occurred on the front of the vehicle. Even so, no injuries have been reported as a result of the defect.
The problem apparently stems from the fact that the mounting pads on the vehicles' steel wheels may have been faulty from the factory. In addition, the wheel mounting face on rear disc brakes may not have been installed properly. Ford will inspect the rear disc face and replace them as necessary. In addition, the company will replace all of the vehicle's wheel studs free of charge. Head to the NHTSA website for more information, and click past the jump to view the full recall notice.

2015 Ford Mustang spied on video for the first time

Thu, 20 Jun 2013

Not many cars will continue to hold our rapt attention quite like the upcoming redesigned 2015 Ford Mustang, codenamed S550 internally. Earlier this month, we brought you the first spy photos of a next-gen Mustang prototype out testing, and even though expertly placed cladding concealed the pony car's new shape, we could tell that underneath was hiding an altogether new form inspired by the Evos Concept from 2011.
Today we give you some video of what looks to be the same Mustang prototype, which you can watch below, and while the budding director behind the camera wasn't able to capture much in the way of the engine's audio signature, we can see the car in motion for the first time and compare its relative size and shape to the S197 Mustang GT that's on its tail.